SPEAr: Add interface information in initialization

Few Designware peripheral registers need to be modified based on the
ethernet interface selected by the board. This patch supports interface
information in ethernet driver

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/board/spear/spear300/spear300.c b/board/spear/spear300/spear300.c
index 2283ad5..f809c2d 100644
--- a/board/spear/spear300/spear300.c
+++ b/board/spear/spear300/spear300.c
@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <miiphy.h>
 #include <netdev.h>
 #include <nand.h>
 #include <asm/io.h>
@@ -64,9 +65,13 @@
 
 int board_eth_init(bd_t *bis)
 {
+	int ret = 0;
+
 #if defined(CONFIG_DESIGNWARE_ETH)
-	return designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY);
-#else
-	return -1;
+	u32 interface = PHY_INTERFACE_MODE_MII;
+	if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY,
+				interface) >= 0)
+		ret++;
 #endif
+	return ret;
 }
diff --git a/board/spear/spear310/spear310.c b/board/spear/spear310/spear310.c
index c0e6829..8609a59 100644
--- a/board/spear/spear310/spear310.c
+++ b/board/spear/spear310/spear310.c
@@ -23,6 +23,7 @@
  */
 
 #include <common.h>
+#include <miiphy.h>
 #include <netdev.h>
 #include <nand.h>
 #include <asm/io.h>
@@ -68,25 +69,27 @@
 	int ret = 0;
 
 #if defined(CONFIG_DESIGNWARE_ETH)
-	if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY) < 0)
-		ret += -1;
+	u32 interface = PHY_INTERFACE_MODE_MII;
+	if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY,
+				interface) >= 0)
+		ret++;
 #endif
 #if defined(CONFIG_MACB)
 	if (macb_eth_initialize(0, (void *)CONFIG_SYS_MACB0_BASE,
-				CONFIG_MACB0_PHY) < 0)
-		ret += -1;
+				CONFIG_MACB0_PHY) >= 0)
+		ret++;
 
 	if (macb_eth_initialize(1, (void *)CONFIG_SYS_MACB1_BASE,
-				CONFIG_MACB1_PHY) < 0)
-		ret += -1;
+				CONFIG_MACB1_PHY) >= 0)
+		ret++;
 
 	if (macb_eth_initialize(2, (void *)CONFIG_SYS_MACB2_BASE,
-				CONFIG_MACB2_PHY) < 0)
-		ret += -1;
+				CONFIG_MACB2_PHY) >= 0)
+		ret++;
 
 	if (macb_eth_initialize(3, (void *)CONFIG_SYS_MACB3_BASE,
-				CONFIG_MACB3_PHY) < 0)
-		ret += -1;
+				CONFIG_MACB3_PHY) >= 0)
+		ret++;
 #endif
 	return ret;
 }
diff --git a/board/spear/spear320/spear320.c b/board/spear/spear320/spear320.c
index e101888..54a2e10 100644
--- a/board/spear/spear320/spear320.c
+++ b/board/spear/spear320/spear320.c
@@ -23,6 +23,7 @@
  */
 
 #include <common.h>
+#include <miiphy.h>
 #include <netdev.h>
 #include <nand.h>
 #include <asm/io.h>
@@ -31,10 +32,20 @@
 #include <asm/arch/spr_defs.h>
 #include <asm/arch/spr_misc.h>
 
+#define PLGPIO_SEL_36	0xb3000028
+#define PLGPIO_IO_36	0xb3000038
+
 static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE];
 
+static void spear_phy_reset(void)
+{
+	writel(0x10, PLGPIO_IO_36);
+	writel(0x10, PLGPIO_SEL_36);
+}
+
 int board_init(void)
 {
+	spear_phy_reset();
 	return spear_board_init(MACH_TYPE_SPEAR320);
 }
 
@@ -67,14 +78,17 @@
 int board_eth_init(bd_t *bis)
 {
 	int ret = 0;
+
 #if defined(CONFIG_DESIGNWARE_ETH)
-	if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY) < 0)
-		ret += -1;
+	u32 interface = PHY_INTERFACE_MODE_MII;
+	if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY,
+				interface) >= 0)
+		ret++;
 #endif
 #if defined(CONFIG_MACB)
 	if (macb_eth_initialize(0, (void *)CONFIG_SYS_MACB0_BASE,
-				CONFIG_MACB0_PHY) < 0)
-		ret += -1;
+				CONFIG_MACB0_PHY) >= 0)
+		ret++;
 #endif
 	return ret;
 }
diff --git a/board/spear/spear600/spear600.c b/board/spear/spear600/spear600.c
index d18d313..814f9cc 100644
--- a/board/spear/spear600/spear600.c
+++ b/board/spear/spear600/spear600.c
@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <miiphy.h>
 #include <netdev.h>
 #include <nand.h>
 #include <asm/io.h>
@@ -59,9 +60,16 @@
 
 int board_eth_init(bd_t *bis)
 {
+	int ret = 0;
+
 #if defined(CONFIG_DESIGNWARE_ETH)
-	return designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY);
-#else
-	return -1;
+	u32 interface = PHY_INTERFACE_MODE_MII;
+#if defined(CONFIG_DW_AUTONEG)
+	interface = PHY_INTERFACE_MODE_GMII;
+#endif
+	if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY,
+				interface) >= 0)
+		ret++;
 #endif
+	return ret;
 }