armv7: LS1021a: enable i-cache in start.S
Delete CONFIG_SKIP_LOWLEVEL_INIT define in ls1021atwr.h and
ls1021aqds.h can let it run cpu_init_cp15 to enable i-cache. First
stage of u-boot can run faster after that. There is a description
about skip lowlevel init in board/freescale/ls1021atwr/README.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/board/freescale/ls1021aqds/README b/board/freescale/ls1021aqds/README
index c561776..6cf7146 100644
--- a/board/freescale/ls1021aqds/README
+++ b/board/freescale/ls1021aqds/README
@@ -110,3 +110,9 @@
0x00_7E80_0000 0x00_7E80_FFFF IFC - NAND Flash 64KB
0x00_7FB0_0000 0x00_7FB0_0FFF IFC - FPGA 4KB
0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB
+
+LS1021a rev1.0 Soc specific Options/Settings
+--------------------------------------------
+If the LS1021a Soc is rev1.0, you need modify the configure file.
+Add the following define in include/configs/ls1021aqds.h:
+#define CONFIG_SKIP_LOWLEVEL_INIT