timer: Add helper for drivers using timebase fallback
This function is designed to be used when a timer used to be initialized by
the cpu (e.g. RISC-V timers), but now is initialized by dm_timer_init. In
such a case, the timer may prefer to use the clocks and clock-frequency
properties, but should be able to fall back on using the cpu's
timebase-frequency.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Rick Chen <rick@andestech.com>
diff --git a/drivers/timer/timer-uclass.c b/drivers/timer/timer-uclass.c
index 14dde95..e9802c8 100644
--- a/drivers/timer/timer-uclass.c
+++ b/drivers/timer/timer-uclass.c
@@ -4,6 +4,7 @@
*/
#include <common.h>
+#include <cpu.h>
#include <dm.h>
#include <init.h>
#include <dm/lists.h>
@@ -79,6 +80,36 @@
return 0;
}
+/*
+ * TODO: should be CONFIG_IS_ENABLED(CPU), but the SPL config has _SUPPORT on
+ * the end...
+ */
+#if defined(CONFIG_CPU) || defined(CONFIG_SPL_CPU_SUPPORT)
+int timer_timebase_fallback(struct udevice *dev)
+{
+ struct udevice *cpu;
+ struct cpu_platdata *cpu_plat;
+ struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ /* Did we get our clock rate from the device tree? */
+ if (uc_priv->clock_rate)
+ return 0;
+
+ /* Fall back to timebase-frequency */
+ dev_dbg(dev, "missing clocks or clock-frequency property; falling back on timebase-frequency\n");
+ cpu = cpu_get_current_dev();
+ if (!cpu)
+ return -ENODEV;
+
+ cpu_plat = dev_get_parent_platdata(cpu);
+ if (!cpu_plat)
+ return -ENODEV;
+
+ uc_priv->clock_rate = cpu_plat->timebase_freq;
+ return 0;
+}
+#endif
+
u64 timer_conv_64(u32 count)
{
/* increment tbh if tbl has rolled over */
diff --git a/include/timer.h b/include/timer.h
index a49b500..8b9fa51 100644
--- a/include/timer.h
+++ b/include/timer.h
@@ -15,6 +15,21 @@
*/
int dm_timer_init(void);
+/**
+ * timer_timebase_fallback() - Helper for timers using timebase fallback
+ * @dev: A timer partially-probed timer device
+ *
+ * This is a helper function designed for timers which need to fall back on the
+ * cpu's timebase. This function is designed to be called during the driver's
+ * probe(). If there is a clocks or clock-frequency property in the timer's
+ * binding, then it will be used. Otherwise, the timebase of the current cpu
+ * will be used. This is initialized by the cpu driver, and usually gotten from
+ * ``/cpus/timebase-frequency`` or ``/cpus/cpu@X/timebase-frequency``.
+ *
+ * Return: 0 if OK, or negative error code on failure
+ */
+int timer_timebase_fallback(struct udevice *dev);
+
/*
* timer_conv_64 - convert 32-bit counter value to 64-bit
*