net: calxedagmac: Convert to DM_ETH
To squash that nasty warning message and make better use of the newly
gained OF_CONTROL feature, let's convert the calxedagmac driver to the
"new" driver model.
The conversion is pretty straight forward, mostly just adjusting the
use of the involved data structures.
The only actual change is the required split of the receive routine into
a receive and free_pkt part.
Also this allows us to get rid of the hardcoded platform information and
explicit init calls.
This also uses the opportunity to wrap the code decoding the MMIO
register base address, to make it safe for using PHYS_64BIT later.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3586426..e9f72b1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -719,6 +719,7 @@
select CLK
select CLK_CCF
select AHCI
+ select DM_ETH
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c
index 2e2300a..0667a48 100644
--- a/board/highbank/highbank.c
+++ b/board/highbank/highbank.c
@@ -10,7 +10,6 @@
#include <fdt_support.h>
#include <init.h>
#include <net.h>
-#include <netdev.h>
#include <scsi.h>
#include <asm/global_data.h>
@@ -52,18 +51,6 @@
return 0;
}
-/* We know all the init functions have been run now */
-int board_eth_init(struct bd_info *bis)
-{
- int rc = 0;
-
-#ifdef CONFIG_CALXEDA_XGMAC
- rc += calxedaxgmac_initialize(0, 0xfff50000);
- rc += calxedaxgmac_initialize(1, 0xfff51000);
-#endif
- return rc;
-}
-
#ifdef CONFIG_SCSI_AHCI_PLAT
void scsi_init(void)
{
diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig
index 773ed7a..c3352b8 100644
--- a/configs/highbank_defconfig
+++ b/configs/highbank_defconfig
@@ -27,3 +27,4 @@
CONFIG_CONS_INDEX=0
CONFIG_OF_LIBFDT=y
CONFIG_OF_BOARD=y
+CONFIG_CALXEDA_XGMAC=y
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 72822ea..3826390 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -180,6 +180,13 @@
This driver supports the Cortina-Access Ethernet MAC for
all supported CAxxxx SoCs.
+config CALXEDA_XGMAC
+ bool "Calxeda XGMAC support"
+ depends on DM_ETH
+ help
+ This driver supports the XGMAC in Calxeda Highbank and Midway
+ machines.
+
config DWC_ETH_QOS
bool "Synopsys DWC Ethernet QOS device support"
depends on DM_ETH
diff --git a/drivers/net/calxedaxgmac.c b/drivers/net/calxedaxgmac.c
index 8b2ee49..b98d709 100644
--- a/drivers/net/calxedaxgmac.c
+++ b/drivers/net/calxedaxgmac.c
@@ -10,6 +10,8 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <asm/io.h>
+#include <dm.h>
+#include <dm/device-internal.h> /* for dev_set_priv() */
#define TX_NUM_DESC 1
#define RX_NUM_DESC 32
@@ -212,6 +214,18 @@
__le32 res[3];
};
+static struct xgmac_regs *xgmac_get_regs(struct eth_pdata *pdata)
+{
+ /*
+ * We use PHYS_64BIT on Highbank, so phys_addr_t is bigger than
+ * a pointer. U-Boot doesn't use LPAE (not even the MMU on highbank),
+ * so we can't access anything above 4GB.
+ * We have a check in the probe function below the ensure this,
+ * so casting to a 32-bit pointer type is fine here.
+ */
+ return (struct xgmac_regs *)(uintptr_t)pdata->iobase;
+}
+
/* XGMAC Descriptor Access Helpers */
static inline void desc_set_buf_len(struct xgmac_dma_desc *p, u32 buf_sz)
{
@@ -304,8 +318,6 @@
u32 tx_currdesc;
u32 rx_currdesc;
-
- struct eth_device *dev;
} __aligned(32);
/*
@@ -313,10 +325,10 @@
* advanced descriptors.
*/
-static void init_rx_desc(struct calxeda_eth_dev *priv)
+static void init_rx_desc(struct eth_pdata *pdata, struct calxeda_eth_dev *priv)
{
struct xgmac_dma_desc *rxdesc = priv->rx_chain;
- struct xgmac_regs *regs = (struct xgmac_regs *)priv->dev->iobase;
+ struct xgmac_regs *regs = xgmac_get_regs(pdata);
void *rxbuffer = priv->rxbuffer;
int i;
@@ -330,17 +342,16 @@
}
}
-static void init_tx_desc(struct calxeda_eth_dev *priv)
+static void init_tx_desc(struct eth_pdata *pdata, struct calxeda_eth_dev *priv)
{
- struct xgmac_regs *regs = (struct xgmac_regs *)priv->dev->iobase;
+ struct xgmac_regs *regs = xgmac_get_regs(pdata);
desc_init_tx_desc(priv->tx_chain, TX_NUM_DESC);
writel((ulong)priv->tx_chain, ®s->txdesclist);
}
-static int xgmac_reset(struct eth_device *dev)
+static int xgmac_reset(struct xgmac_regs *regs)
{
- struct xgmac_regs *regs = (struct xgmac_regs *)dev->iobase;
int timeout = MAC_TIMEOUT;
u32 value;
@@ -356,27 +367,28 @@
return timeout;
}
-static void xgmac_hwmacaddr(struct eth_device *dev)
+static void xgmac_hwmacaddr(struct eth_pdata *pdata)
{
- struct xgmac_regs *regs = (struct xgmac_regs *)dev->iobase;
+ struct xgmac_regs *regs = xgmac_get_regs(pdata);
u32 macaddr[2];
- memcpy(macaddr, dev->enetaddr, 6);
+ memcpy(macaddr, pdata->enetaddr, ARP_HLEN);
writel(macaddr[1], ®s->macaddr[0].hi);
writel(macaddr[0], ®s->macaddr[0].lo);
}
-static int xgmac_init(struct eth_device *dev, struct bd_info * bis)
+static int xgmac_eth_start(struct udevice *dev)
{
- struct xgmac_regs *regs = (struct xgmac_regs *)dev->iobase;
- struct calxeda_eth_dev *priv = dev->priv;
- int value;
+ struct eth_pdata *pdata = dev_get_plat(dev);
+ struct xgmac_regs *regs = xgmac_get_regs(pdata);
+ struct calxeda_eth_dev *priv = dev_get_priv(dev);
+ u32 value;
- if (xgmac_reset(dev) < 0)
- return -1;
+ if (xgmac_reset(regs) < 0)
+ return -ETIMEDOUT;
/* set the hardware MAC address */
- xgmac_hwmacaddr(dev);
+ xgmac_hwmacaddr(pdata);
/* set the AXI bus modes */
value = XGMAC_DMA_BUSMODE_ATDS |
@@ -401,8 +413,8 @@
writel(value, ®s->flow_control);
/* Initialize the descriptor chains */
- init_rx_desc(priv);
- init_tx_desc(priv);
+ init_rx_desc(pdata, priv);
+ init_tx_desc(pdata, priv);
/* must set to 0, or when started up will cause issues */
priv->tx_currdesc = 0;
@@ -425,10 +437,11 @@
return 0;
}
-static int xgmac_tx(struct eth_device *dev, void *packet, int length)
+static int xgmac_tx(struct udevice *dev, void *packet, int length)
{
- struct xgmac_regs *regs = (struct xgmac_regs *)dev->iobase;
- struct calxeda_eth_dev *priv = dev->priv;
+ struct calxeda_eth_dev *priv = dev_get_priv(dev);
+ struct eth_pdata *pdata = dev_get_plat(dev);
+ struct xgmac_regs *regs = xgmac_get_regs(pdata);
u32 currdesc = priv->tx_currdesc;
struct xgmac_dma_desc *txdesc = &priv->tx_chain[currdesc];
int timeout;
@@ -453,35 +466,45 @@
return 0;
}
-static int xgmac_rx(struct eth_device *dev)
+static int xgmac_rx(struct udevice *dev, int flags, uchar **packetp)
{
- struct xgmac_regs *regs = (struct xgmac_regs *)dev->iobase;
- struct calxeda_eth_dev *priv = dev->priv;
+ struct calxeda_eth_dev *priv = dev_get_priv(dev);
u32 currdesc = priv->rx_currdesc;
struct xgmac_dma_desc *rxdesc = &priv->rx_chain[currdesc];
int length = 0;
/* check if the host has the desc */
if (desc_get_owner(rxdesc))
- return -1; /* something bad happened */
+ return -EAGAIN; /* the MAC is still chewing on it */
length = desc_get_rx_frame_len(rxdesc);
+ *packetp = desc_get_buf_addr(rxdesc);
- net_process_received_packet(desc_get_buf_addr(rxdesc), length);
+ priv->rx_currdesc = (currdesc + 1) & (RX_NUM_DESC - 1);
+
+ return length;
+}
+
+static int xgmac_free_pkt(struct udevice *dev, uchar *packet, int length)
+{
+ struct eth_pdata *pdata = dev_get_plat(dev);
+ struct xgmac_regs *regs = xgmac_get_regs(pdata);
+ struct calxeda_eth_dev *priv = dev_get_priv(dev);
+ u32 rxdesc = ((char *)packet - priv->rxbuffer) / ETH_BUF_SZ;
+ struct xgmac_dma_desc *p = &priv->rx_chain[rxdesc];
/* set descriptor back to owned by XGMAC */
- desc_set_rx_owner(rxdesc);
+ desc_set_rx_owner(p);
writel(1, ®s->rxpoll);
- priv->rx_currdesc = (currdesc + 1) & (RX_NUM_DESC - 1);
-
- return length;
+ return 0;
}
-static void xgmac_halt(struct eth_device *dev)
+static void xgmac_eth_stop(struct udevice *dev)
{
- struct xgmac_regs *regs = (struct xgmac_regs *)dev->iobase;
- struct calxeda_eth_dev *priv = dev->priv;
+ struct calxeda_eth_dev *priv = dev_get_priv(dev);
+ struct eth_pdata *pdata = dev_get_plat(dev);
+ struct xgmac_regs *regs = xgmac_get_regs(pdata);
int value;
/* Disable TX/RX */
@@ -499,47 +522,88 @@
priv->rx_currdesc = 0;
}
+/*
+ * Changing the MAC address is not a good idea, as the fabric would
+ * need to know about this as well (it does not learn MAC addresses).
+ */
+static int xgmac_eth_write_hwaddr(struct udevice *dev)
+{
+ return -ENOSYS;
+}
+
-int calxedaxgmac_initialize(u32 id, ulong base_addr)
+static int xgmac_eth_read_rom_hwaddr(struct udevice *dev)
{
- struct eth_device *dev;
- struct calxeda_eth_dev *priv;
- struct xgmac_regs *regs;
+ struct eth_pdata *pdata = dev_get_plat(dev);
+ struct xgmac_regs *regs = xgmac_get_regs(pdata);
u32 macaddr[2];
- regs = (struct xgmac_regs *)base_addr;
+ /* The MAC address is already configured, so read it from registers. */
+ macaddr[1] = readl(®s->macaddr[0].hi);
+ macaddr[0] = readl(®s->macaddr[0].lo);
+ memcpy(pdata->enetaddr, macaddr, ARP_HLEN);
- /* check hardware version */
- if (readl(®s->version) != 0x1012)
- return -1;
+ return 0;
+}
- dev = malloc(sizeof(*dev));
- if (!dev)
- return 0;
- memset(dev, 0, sizeof(*dev));
+static int xgmac_ofdata_to_platdata(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_plat(dev);
+ struct calxeda_eth_dev *priv;
/* Structure must be aligned, because it contains the descriptors */
priv = memalign(32, sizeof(*priv));
- if (!priv) {
- free(dev);
- return 0;
+ if (!priv)
+ return -ENOMEM;
+ dev_set_priv(dev, priv);
+
+ pdata->iobase = devfdt_get_addr(dev);
+ if (pdata->iobase == FDT_ADDR_T_NONE) {
+ printf("%s: Cannot find XGMAC base address\n", __func__);
+ return -EINVAL;
+ }
+ if (pdata->iobase >= (1ULL << 32)) {
+ printf("%s: MMIO base address cannot be above 4GB\n", __func__);
+ return -EINVAL;
}
- dev->iobase = (int)base_addr;
- dev->priv = priv;
- priv->dev = dev;
- sprintf(dev->name, "xgmac%d", id);
+ return 0;
+}
- /* The MAC address is already configured, so read it from registers. */
- macaddr[1] = readl(®s->macaddr[0].hi);
- macaddr[0] = readl(®s->macaddr[0].lo);
- memcpy(dev->enetaddr, macaddr, 6);
+static int xgmac_eth_probe(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_plat(dev);
+ struct xgmac_regs *regs = xgmac_get_regs(pdata);
- dev->init = xgmac_init;
- dev->send = xgmac_tx;
- dev->recv = xgmac_rx;
- dev->halt = xgmac_halt;
+ /* check hardware version */
+ if (readl(®s->version) != 0x1012)
+ return -ENODEV;
- eth_register(dev);
+ xgmac_eth_read_rom_hwaddr(dev);
- return 1;
+ return 0;
}
+
+static const struct eth_ops xgmac_eth_ops = {
+ .start = xgmac_eth_start,
+ .send = xgmac_tx,
+ .recv = xgmac_rx,
+ .free_pkt = xgmac_free_pkt,
+ .stop = xgmac_eth_stop,
+ .write_hwaddr = xgmac_eth_write_hwaddr,
+ .read_rom_hwaddr = xgmac_eth_read_rom_hwaddr,
+};
+
+static const struct udevice_id xgmac_eth_ids[] = {
+ { .compatible = "calxeda,hb-xgmac" },
+ { }
+};
+
+U_BOOT_DRIVER(eth_xgmac) = {
+ .name = "eth_xgmac",
+ .id = UCLASS_ETH,
+ .of_match = xgmac_eth_ids,
+ .of_to_plat = xgmac_ofdata_to_platdata,
+ .probe = xgmac_eth_probe,
+ .ops = &xgmac_eth_ops,
+ .plat_auto = sizeof(struct eth_pdata),
+};
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 7f37c81..fbd26dd 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -27,8 +27,6 @@
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_CALXEDA_XGMAC
-
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_RESET_TO_RETRY
diff --git a/include/netdev.h b/include/netdev.h
index 0ad9f8d..b960c42 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -33,7 +33,6 @@
int ax88180_initialize(struct bd_info *bis);
int bcm_sf2_eth_register(struct bd_info *bis, u8 dev_num);
int bfin_EMAC_initialize(struct bd_info *bis);
-int calxedaxgmac_initialize(u32 id, ulong base_addr);
int cs8900_initialize(u8 dev_num, int base_addr);
int dc21x4x_initialize(struct bd_info *bis);
int designware_initialize(ulong base_addr, u32 interface);
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index b24fa36..a2fcafd 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -149,7 +149,6 @@
CONFIG_BUFNO_AUTO_INCR_BIT
CONFIG_BUILD_ENVCRC
CONFIG_BUS_WIDTH
-CONFIG_CALXEDA_XGMAC
CONFIG_CDP_APPLIANCE_VLAN_TYPE
CONFIG_CDP_CAPABILITIES
CONFIG_CDP_DEVICE_ID