phy: usbphyc: increase PLL wait timeout
wait 200us to solve USB init issue on device mode
(ums and stm32prog commands)
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
diff --git a/drivers/phy/phy-stm32-usbphyc.c b/drivers/phy/phy-stm32-usbphyc.c
index 54363cd..6f11190 100644
--- a/drivers/phy/phy-stm32-usbphyc.c
+++ b/drivers/phy/phy-stm32-usbphyc.c
@@ -37,7 +37,8 @@
#define MAX_PHYS 2
-#define PLL_LOCK_TIME_US 100
+/* max 100 us for PLL lock and 100 us for PHY init */
+#define PLL_INIT_TIME_US 200
#define PLL_PWR_DOWN_TIME_US 5
#define PLL_FVCO 2880 /* in MHz */
#define PLL_INFF_MIN_RATE 19200000 /* in Hz */
@@ -177,11 +178,8 @@
setbits_le32(usbphyc->base + STM32_USBPHYC_PLL, PLLEN);
- /*
- * We must wait PLL_LOCK_TIME_US before checking that PLLEN
- * bit is still set
- */
- udelay(PLL_LOCK_TIME_US);
+ /* We must wait PLL_INIT_TIME_US before using PHY */
+ udelay(PLL_INIT_TIME_US);
if (!(readl(usbphyc->base + STM32_USBPHYC_PLL) & PLLEN))
return -EIO;