| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) Siemens AG, 2020 |
| * |
| * Authors: |
| * Jan Kiszka <jan.kiszka@siemens.com> |
| * |
| * Derived from linux/drivers/watchdog/rti_wdt.c |
| */ |
| |
| #include <clk.h> |
| #include <dm.h> |
| #include <dm/device_compat.h> |
| #include <power-domain.h> |
| #include <wdt.h> |
| #include <asm/io.h> |
| #include <remoteproc.h> |
| |
| /* Timer register set definition */ |
| #define RTIDWDCTRL 0x90 |
| #define RTIDWDPRLD 0x94 |
| #define RTIWDSTATUS 0x98 |
| #define RTIWDKEY 0x9c |
| #define RTIDWDCNTR 0xa0 |
| #define RTIWWDRXCTRL 0xa4 |
| #define RTIWWDSIZECTRL 0xa8 |
| |
| #define RTIWWDRX_NMI 0xa |
| |
| #define RTIWWDSIZE_50P 0x50 |
| |
| #define WDENABLE_KEY 0xa98559da |
| |
| #define WDKEY_SEQ0 0xe51a |
| #define WDKEY_SEQ1 0xa35c |
| |
| #define WDT_PRELOAD_SHIFT 13 |
| |
| #define WDT_PRELOAD_MAX 0xfff |
| |
| struct rti_wdt_priv { |
| phys_addr_t regs; |
| unsigned int clk_hz; |
| }; |
| |
| #ifdef CONFIG_WDT_K3_RTI_LOAD_FW |
| #define RTI_WDT_FIT_PATH "/fit-images/k3-rti-wdt-firmware" |
| |
| static int rti_wdt_load_fw(struct udevice *dev) |
| { |
| struct udevice *rproc_dev; |
| int primary_core, ret; |
| u32 cluster_mode; |
| ofnode node; |
| u64 rti_wdt_fw; |
| u32 rti_wdt_fw_size; |
| |
| node = ofnode_path(RTI_WDT_FIT_PATH); |
| if (!ofnode_valid(node)) |
| goto fit_error; |
| |
| ret = ofnode_read_u64(node, "load", &rti_wdt_fw); |
| if (ret) |
| goto fit_error; |
| ret = ofnode_read_u32(node, "size", &rti_wdt_fw_size); |
| if (ret) |
| goto fit_error; |
| |
| node = ofnode_by_compatible(ofnode_null(), "ti,am654-r5fss"); |
| if (!ofnode_valid(node)) |
| goto dt_error; |
| |
| ret = ofnode_read_u32(node, "ti,cluster-mode", &cluster_mode); |
| if (ret) |
| cluster_mode = 1; |
| |
| node = ofnode_by_compatible(node, "ti,am654-r5f"); |
| if (!ofnode_valid(node)) |
| goto dt_error; |
| |
| ret = uclass_get_device_by_ofnode(UCLASS_REMOTEPROC, node, &rproc_dev); |
| if (ret) |
| return ret; |
| |
| primary_core = dev_seq(rproc_dev); |
| |
| ret = rproc_dev_init(primary_core); |
| if (ret) |
| goto fw_error; |
| |
| if (cluster_mode == 1) { |
| ret = rproc_dev_init(primary_core + 1); |
| if (ret) |
| goto fw_error; |
| } |
| |
| ret = rproc_load(primary_core, (ulong)rti_wdt_fw, |
| rti_wdt_fw_size); |
| if (ret) |
| goto fw_error; |
| |
| ret = rproc_start(primary_core); |
| if (ret) |
| goto fw_error; |
| |
| return 0; |
| |
| fit_error: |
| dev_err(dev, "No loadable firmware found under %s\n", RTI_WDT_FIT_PATH); |
| return -ENOENT; |
| |
| dt_error: |
| dev_err(dev, "No compatible firmware target processor found\n"); |
| return -ENODEV; |
| |
| fw_error: |
| dev_err(dev, "Failed to load watchdog firmware into remote processor %d\n", |
| primary_core); |
| return ret; |
| } |
| #else |
| static inline int rti_wdt_load_fw(struct udevice *dev) |
| { |
| return 0; |
| } |
| #endif |
| |
| static int rti_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags) |
| { |
| struct rti_wdt_priv *priv = dev_get_priv(dev); |
| u32 timer_margin; |
| int ret; |
| |
| if (readl(priv->regs + RTIDWDCTRL) == WDENABLE_KEY) |
| return -EBUSY; |
| |
| ret = rti_wdt_load_fw(dev); |
| if (ret < 0) |
| return ret; |
| |
| timer_margin = timeout_ms * priv->clk_hz / 1000; |
| timer_margin >>= WDT_PRELOAD_SHIFT; |
| if (timer_margin > WDT_PRELOAD_MAX) |
| timer_margin = WDT_PRELOAD_MAX; |
| |
| writel(timer_margin, priv->regs + RTIDWDPRLD); |
| writel(RTIWWDRX_NMI, priv->regs + RTIWWDRXCTRL); |
| writel(RTIWWDSIZE_50P, priv->regs + RTIWWDSIZECTRL); |
| |
| readl(priv->regs + RTIWWDSIZECTRL); |
| |
| writel(WDENABLE_KEY, priv->regs + RTIDWDCTRL); |
| |
| return 0; |
| } |
| |
| static int rti_wdt_reset(struct udevice *dev) |
| { |
| struct rti_wdt_priv *priv = dev_get_priv(dev); |
| u32 prld; |
| |
| /* Make sure we do not reset too early */ |
| prld = readl(priv->regs + RTIDWDPRLD) << WDT_PRELOAD_SHIFT; |
| if (readl(priv->regs + RTIDWDCNTR) >= prld / 2) |
| return -EPERM; |
| |
| writel(WDKEY_SEQ0, priv->regs + RTIWDKEY); |
| writel(WDKEY_SEQ1, priv->regs + RTIWDKEY); |
| |
| return 0; |
| } |
| |
| static int rti_wdt_probe(struct udevice *dev) |
| { |
| struct rti_wdt_priv *priv = dev_get_priv(dev); |
| struct clk clk; |
| int ret; |
| |
| priv->regs = devfdt_get_addr(dev); |
| if (!priv->regs) |
| return -EINVAL; |
| |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret) |
| return ret; |
| |
| priv->clk_hz = clk_get_rate(&clk); |
| |
| /* |
| * If watchdog is running at 32k clock, it is not accurate. |
| * Adjust frequency down in this case so that it does not expire |
| * earlier than expected. |
| */ |
| if (priv->clk_hz < 32768) |
| priv->clk_hz = priv->clk_hz * 9 / 10; |
| |
| return 0; |
| } |
| |
| static const struct wdt_ops rti_wdt_ops = { |
| .start = rti_wdt_start, |
| .reset = rti_wdt_reset, |
| }; |
| |
| static const struct udevice_id rti_wdt_ids[] = { |
| { .compatible = "ti,j7-rti-wdt" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(rti_wdt) = { |
| .name = "rti_wdt", |
| .id = UCLASS_WDT, |
| .of_match = rti_wdt_ids, |
| .ops = &rti_wdt_ops, |
| .probe = rti_wdt_probe, |
| .priv_auto = sizeof(struct rti_wdt_priv), |
| .flags = DM_FLAG_LEAVE_PD_ON, |
| }; |