| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2007 |
| * Michael Schwingen, <michael@schwingen.org> |
| * |
| * based in great part on jedec_probe.c from linux kernel: |
| * (C) 2000 Red Hat. GPL'd. |
| * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com |
| */ |
| |
| /* The DEBUG define must be before common to enable debugging */ |
| /*#define DEBUG*/ |
| |
| #include <flash.h> |
| #include <log.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/byteorder.h> |
| |
| #define P_ID_AMD_STD CFI_CMDSET_AMD_LEGACY |
| |
| /* AMD */ |
| #define AM29DL800BB 0x22CB |
| #define AM29DL800BT 0x224A |
| |
| #define AM29F400BB 0x22AB |
| #define AM29F800BB 0x2258 |
| #define AM29F800BT 0x22D6 |
| #define AM29LV400BB 0x22BA |
| #define AM29LV400BT 0x22B9 |
| #define AM29LV800BB 0x225B |
| #define AM29LV800BT 0x22DA |
| #define AM29LV160DT 0x22C4 |
| #define AM29LV160DB 0x2249 |
| #define AM29F017D 0x003D |
| #define AM29F016D 0x00AD |
| #define AM29F080 0x00D5 |
| #define AM29F040 0x00A4 |
| #define AM29LV040B 0x004F |
| #define AM29F032B 0x0041 |
| #define AM29F002T 0x00B0 |
| |
| /* SST */ |
| #define SST39LF800 0x2781 |
| #define SST39LF160 0x2782 |
| #define SST39VF1601 0x234b |
| #define SST39LF512 0x00D4 |
| #define SST39LF010 0x00D5 |
| #define SST39LF020 0x00D6 |
| #define SST39LF040 0x00D7 |
| #define SST39SF010A 0x00B5 |
| #define SST39SF020A 0x00B6 |
| |
| /* STM */ |
| #define STM29F400BB 0x00D6 |
| |
| /* MXIC */ |
| #define MX29LV040 0x004F |
| |
| /* WINBOND */ |
| #define W39L040A 0x00D6 |
| |
| /* AMIC */ |
| #define A29L040 0x0092 |
| |
| /* EON */ |
| #define EN29LV040A 0x004F |
| |
| /* |
| * Unlock address sets for AMD command sets. |
| * Intel command sets use the MTD_UADDR_UNNECESSARY. |
| * Each identifier, except MTD_UADDR_UNNECESSARY, and |
| * MTD_UADDR_NO_SUPPORT must be defined below in unlock_addrs[]. |
| * MTD_UADDR_NOT_SUPPORTED must be 0 so that structure |
| * initialization need not require initializing all of the |
| * unlock addresses for all bit widths. |
| */ |
| enum uaddr { |
| MTD_UADDR_NOT_SUPPORTED = 0, /* data width not supported */ |
| MTD_UADDR_0x0555_0x02AA, |
| MTD_UADDR_0x0555_0x0AAA, |
| MTD_UADDR_0x5555_0x2AAA, |
| MTD_UADDR_0x0AAA_0x0555, |
| MTD_UADDR_DONT_CARE, /* Requires an arbitrary address */ |
| MTD_UADDR_UNNECESSARY, /* Does not require any address */ |
| }; |
| |
| struct unlock_addr { |
| u32 addr1; |
| u32 addr2; |
| }; |
| |
| /* |
| * I don't like the fact that the first entry in unlock_addrs[] |
| * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore, |
| * should not be used. The problem is that structures with |
| * initializers have extra fields initialized to 0. It is _very_ |
| * desireable to have the unlock address entries for unsupported |
| * data widths automatically initialized - that means that |
| * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here |
| * must go unused. |
| */ |
| static const struct unlock_addr unlock_addrs[] = { |
| [MTD_UADDR_NOT_SUPPORTED] = { |
| .addr1 = 0xffff, |
| .addr2 = 0xffff |
| }, |
| |
| [MTD_UADDR_0x0555_0x02AA] = { |
| .addr1 = 0x0555, |
| .addr2 = 0x02aa |
| }, |
| |
| [MTD_UADDR_0x0555_0x0AAA] = { |
| .addr1 = 0x0555, |
| .addr2 = 0x0aaa |
| }, |
| |
| [MTD_UADDR_0x5555_0x2AAA] = { |
| .addr1 = 0x5555, |
| .addr2 = 0x2aaa |
| }, |
| |
| [MTD_UADDR_0x0AAA_0x0555] = { |
| .addr1 = 0x0AAA, |
| .addr2 = 0x0555 |
| }, |
| |
| [MTD_UADDR_DONT_CARE] = { |
| .addr1 = 0x0000, /* Doesn't matter which address */ |
| .addr2 = 0x0000 /* is used - must be last entry */ |
| }, |
| |
| [MTD_UADDR_UNNECESSARY] = { |
| .addr1 = 0x0000, |
| .addr2 = 0x0000 |
| } |
| }; |
| |
| struct amd_flash_info { |
| const __u16 mfr_id; |
| const __u16 dev_id; |
| const char *name; |
| const int DevSize; |
| const int NumEraseRegions; |
| const int CmdSet; |
| const __u8 uaddr[4]; /* unlock addrs for 8, 16, 32, 64 */ |
| const ulong regions[6]; |
| }; |
| |
| #define ERASEINFO(size,blocks) (size<<8)|(blocks-1) |
| |
| #define SIZE_64KiB 16 |
| #define SIZE_128KiB 17 |
| #define SIZE_256KiB 18 |
| #define SIZE_512KiB 19 |
| #define SIZE_1MiB 20 |
| #define SIZE_2MiB 21 |
| #define SIZE_4MiB 22 |
| #define SIZE_8MiB 23 |
| |
| static const struct amd_flash_info jedec_table[] = { |
| #ifdef CONFIG_SYS_FLASH_LEGACY_256Kx8 |
| { |
| .mfr_id = (u16)SST_MANUFACT, |
| .dev_id = SST39LF020, |
| .name = "SST 39LF020", |
| .uaddr = { |
| [0] = MTD_UADDR_0x5555_0x2AAA /* x8 */ |
| }, |
| .DevSize = SIZE_256KiB, |
| .CmdSet = P_ID_AMD_STD, |
| .NumEraseRegions= 1, |
| .regions = { |
| ERASEINFO(0x01000,64), |
| } |
| }, |
| #endif |
| #ifdef CONFIG_SYS_FLASH_LEGACY_512Kx8 |
| { |
| .mfr_id = (u16)AMD_MANUFACT, |
| .dev_id = AM29LV040B, |
| .name = "AMD AM29LV040B", |
| .uaddr = { |
| [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ |
| }, |
| .DevSize = SIZE_512KiB, |
| .CmdSet = P_ID_AMD_STD, |
| .NumEraseRegions= 1, |
| .regions = { |
| ERASEINFO(0x10000,8), |
| } |
| }, |
| { |
| .mfr_id = (u16)SST_MANUFACT, |
| .dev_id = SST39LF040, |
| .name = "SST 39LF040", |
| .uaddr = { |
| [0] = MTD_UADDR_0x5555_0x2AAA /* x8 */ |
| }, |
| .DevSize = SIZE_512KiB, |
| .CmdSet = P_ID_AMD_STD, |
| .NumEraseRegions= 1, |
| .regions = { |
| ERASEINFO(0x01000,128), |
| } |
| }, |
| { |
| .mfr_id = (u16)STM_MANUFACT, |
| .dev_id = STM_ID_M29W040B, |
| .name = "ST Micro M29W040B", |
| .uaddr = { |
| [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ |
| }, |
| .DevSize = SIZE_512KiB, |
| .CmdSet = P_ID_AMD_STD, |
| .NumEraseRegions= 1, |
| .regions = { |
| ERASEINFO(0x10000,8), |
| } |
| }, |
| { |
| .mfr_id = (u16)MX_MANUFACT, |
| .dev_id = MX29LV040, |
| .name = "MXIC MX29LV040", |
| .uaddr = { |
| [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ |
| }, |
| .DevSize = SIZE_512KiB, |
| .CmdSet = P_ID_AMD_STD, |
| .NumEraseRegions= 1, |
| .regions = { |
| ERASEINFO(0x10000, 8), |
| } |
| }, |
| { |
| .mfr_id = (u16)WINB_MANUFACT, |
| .dev_id = W39L040A, |
| .name = "WINBOND W39L040A", |
| .uaddr = { |
| [0] = MTD_UADDR_0x5555_0x2AAA /* x8 */ |
| }, |
| .DevSize = SIZE_512KiB, |
| .CmdSet = P_ID_AMD_STD, |
| .NumEraseRegions= 1, |
| .regions = { |
| ERASEINFO(0x10000, 8), |
| } |
| }, |
| { |
| .mfr_id = (u16)AMIC_MANUFACT, |
| .dev_id = A29L040, |
| .name = "AMIC A29L040", |
| .uaddr = { |
| [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ |
| }, |
| .DevSize = SIZE_512KiB, |
| .CmdSet = P_ID_AMD_STD, |
| .NumEraseRegions= 1, |
| .regions = { |
| ERASEINFO(0x10000, 8), |
| } |
| }, |
| { |
| .mfr_id = (u16)EON_MANUFACT, |
| .dev_id = EN29LV040A, |
| .name = "EON EN29LV040A", |
| .uaddr = { |
| [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ |
| }, |
| .DevSize = SIZE_512KiB, |
| .CmdSet = P_ID_AMD_STD, |
| .NumEraseRegions= 1, |
| .regions = { |
| ERASEINFO(0x10000, 8), |
| } |
| }, |
| #endif |
| #ifdef CONFIG_SYS_FLASH_LEGACY_512Kx16 |
| { |
| .mfr_id = (u16)AMD_MANUFACT, |
| .dev_id = AM29F400BB, |
| .name = "AMD AM29F400BB", |
| .uaddr = { |
| [1] = MTD_UADDR_0x0555_0x02AA /* x16 */ |
| }, |
| .DevSize = SIZE_512KiB, |
| .CmdSet = CFI_CMDSET_AMD_LEGACY, |
| .NumEraseRegions= 4, |
| .regions = { |
| ERASEINFO(0x04000, 1), |
| ERASEINFO(0x02000, 2), |
| ERASEINFO(0x08000, 1), |
| ERASEINFO(0x10000, 7), |
| } |
| }, |
| { |
| .mfr_id = (u16)AMD_MANUFACT, |
| .dev_id = AM29LV400BB, |
| .name = "AMD AM29LV400BB", |
| .uaddr = { |
| [1] = MTD_UADDR_0x0555_0x02AA /* x16 */ |
| }, |
| .DevSize = SIZE_512KiB, |
| .CmdSet = CFI_CMDSET_AMD_LEGACY, |
| .NumEraseRegions= 4, |
| .regions = { |
| ERASEINFO(0x04000,1), |
| ERASEINFO(0x02000,2), |
| ERASEINFO(0x08000,1), |
| ERASEINFO(0x10000,7), |
| } |
| }, |
| { |
| .mfr_id = (u16)AMD_MANUFACT, |
| .dev_id = AM29LV800BB, |
| .name = "AMD AM29LV800BB", |
| .uaddr = { |
| [1] = MTD_UADDR_0x0555_0x02AA /* x16 */ |
| }, |
| .DevSize = SIZE_1MiB, |
| .CmdSet = CFI_CMDSET_AMD_LEGACY, |
| .NumEraseRegions= 4, |
| .regions = { |
| ERASEINFO(0x04000, 1), |
| ERASEINFO(0x02000, 2), |
| ERASEINFO(0x08000, 1), |
| ERASEINFO(0x10000, 15), |
| } |
| }, |
| { |
| .mfr_id = (u16)AMD_MANUFACT, |
| .dev_id = AM29LV800BT, |
| .name = "AMD AM29LV800BT", |
| .uaddr = { |
| [1] = MTD_UADDR_0x0555_0x02AA /* x16 */ |
| }, |
| .DevSize = SIZE_1MiB, |
| .CmdSet = CFI_CMDSET_AMD_LEGACY, |
| .NumEraseRegions= 4, |
| .regions = { |
| ERASEINFO(0x10000, 15), |
| ERASEINFO(0x08000, 1), |
| ERASEINFO(0x02000, 2), |
| ERASEINFO(0x04000, 1), |
| } |
| }, |
| { |
| .mfr_id = (u16)MX_MANUFACT, |
| .dev_id = AM29LV800BT, |
| .name = "MXIC MX29LV800BT", |
| .uaddr = { |
| [1] = MTD_UADDR_0x0555_0x02AA /* x16 */ |
| }, |
| .DevSize = SIZE_1MiB, |
| .CmdSet = CFI_CMDSET_AMD_LEGACY, |
| .NumEraseRegions= 4, |
| .regions = { |
| ERASEINFO(0x10000, 15), |
| ERASEINFO(0x08000, 1), |
| ERASEINFO(0x02000, 2), |
| ERASEINFO(0x04000, 1), |
| } |
| }, |
| { |
| .mfr_id = (u16)EON_ALT_MANU, |
| .dev_id = AM29LV800BT, |
| .name = "EON EN29LV800BT", |
| .uaddr = { |
| [1] = MTD_UADDR_0x0555_0x02AA /* x16 */ |
| }, |
| .DevSize = SIZE_1MiB, |
| .CmdSet = CFI_CMDSET_AMD_LEGACY, |
| .NumEraseRegions= 4, |
| .regions = { |
| ERASEINFO(0x10000, 15), |
| ERASEINFO(0x08000, 1), |
| ERASEINFO(0x02000, 2), |
| ERASEINFO(0x04000, 1), |
| } |
| }, |
| { |
| .mfr_id = (u16)STM_MANUFACT, |
| .dev_id = STM29F400BB, |
| .name = "ST Micro M29F400BB", |
| .uaddr = { |
| [1] = MTD_UADDR_0x0555_0x02AA /* x16 */ |
| }, |
| .DevSize = SIZE_512KiB, |
| .CmdSet = CFI_CMDSET_AMD_LEGACY, |
| .NumEraseRegions = 4, |
| .regions = { |
| ERASEINFO(0x04000, 1), |
| ERASEINFO(0x02000, 2), |
| ERASEINFO(0x08000, 1), |
| ERASEINFO(0x10000, 7), |
| } |
| }, |
| #endif |
| }; |
| |
| static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base) |
| { |
| int i,j; |
| int sect_cnt; |
| int size_ratio; |
| int total_size; |
| enum uaddr uaddr_idx; |
| |
| size_ratio = info->portwidth / info->chipwidth; |
| |
| debug("Found JEDEC Flash: %s\n", jedec_entry->name); |
| info->vendor = jedec_entry->CmdSet; |
| /* Todo: do we need device-specific timeouts? */ |
| info->erase_blk_tout = 30000; |
| info->buffer_write_tout = 1000; |
| info->write_tout = 100; |
| info->name = jedec_entry->name; |
| |
| /* copy unlock addresses from device table to CFI info struct. This |
| is just here because the addresses are in the table anyway - if |
| the flash is not detected due to wrong unlock addresses, |
| flash_detect_legacy would have to try all of them before we even |
| get here. */ |
| switch(info->chipwidth) { |
| case FLASH_CFI_8BIT: |
| uaddr_idx = jedec_entry->uaddr[0]; |
| break; |
| case FLASH_CFI_16BIT: |
| uaddr_idx = jedec_entry->uaddr[1]; |
| break; |
| case FLASH_CFI_32BIT: |
| uaddr_idx = jedec_entry->uaddr[2]; |
| break; |
| default: |
| uaddr_idx = MTD_UADDR_NOT_SUPPORTED; |
| break; |
| } |
| |
| debug("unlock address index %d\n", uaddr_idx); |
| info->addr_unlock1 = unlock_addrs[uaddr_idx].addr1; |
| info->addr_unlock2 = unlock_addrs[uaddr_idx].addr2; |
| debug("unlock addresses are 0x%lx/0x%lx\n", |
| info->addr_unlock1, info->addr_unlock2); |
| |
| sect_cnt = 0; |
| total_size = 0; |
| for (i = 0; i < jedec_entry->NumEraseRegions; i++) { |
| ulong erase_region_size = jedec_entry->regions[i] >> 8; |
| ulong erase_region_count = (jedec_entry->regions[i] & 0xff) + 1; |
| |
| total_size += erase_region_size * erase_region_count; |
| debug("erase_region_count = %ld erase_region_size = %ld\n", |
| erase_region_count, erase_region_size); |
| for (j = 0; j < erase_region_count; j++) { |
| if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) { |
| printf("ERROR: too many flash sectors\n"); |
| break; |
| } |
| info->start[sect_cnt] = base; |
| base += (erase_region_size * size_ratio); |
| sect_cnt++; |
| } |
| } |
| info->sector_count = sect_cnt; |
| info->size = total_size * size_ratio; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * match jedec ids against table. If a match is found, fill flash_info entry |
| */ |
| int jedec_flash_match(flash_info_t *info, ulong base) |
| { |
| int ret = 0; |
| int i; |
| ulong mask = 0xFFFF; |
| if (info->chipwidth == 1) |
| mask = 0xFF; |
| |
| for (i = 0; i < ARRAY_SIZE(jedec_table); i++) { |
| if ((jedec_table[i].mfr_id & mask) == (info->manufacturer_id & mask) && |
| (jedec_table[i].dev_id & mask) == (info->device_id & mask)) { |
| fill_info(info, &jedec_table[i], base); |
| ret = 1; |
| break; |
| } |
| } |
| return ret; |
| } |