| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com |
| */ |
| |
| #ifndef K3_PSIL_H_ |
| #define K3_PSIL_H_ |
| |
| #include <linux/types.h> |
| |
| #define K3_PSIL_DST_THREAD_ID_OFFSET 0x8000 |
| |
| struct device; |
| |
| /** |
| * enum udma_tp_level - Channel Throughput Levels |
| * @UDMA_TP_NORMAL: Normal channel |
| * @UDMA_TP_HIGH: High Throughput channel |
| * @UDMA_TP_ULTRAHIGH: Ultra High Throughput channel |
| */ |
| enum udma_tp_level { |
| UDMA_TP_NORMAL = 0, |
| UDMA_TP_HIGH, |
| UDMA_TP_ULTRAHIGH, |
| UDMA_TP_LAST, |
| }; |
| |
| /** |
| * enum psil_endpoint_type - PSI-L Endpoint type |
| * @PSIL_EP_NATIVE: Normal channel |
| * @PSIL_EP_PDMA_XY: XY mode PDMA |
| * @PSIL_EP_PDMA_MCAN: MCAN mode PDMA |
| * @PSIL_EP_PDMA_AASRC: AASRC mode PDMA |
| */ |
| enum psil_endpoint_type { |
| PSIL_EP_NATIVE = 0, |
| PSIL_EP_PDMA_XY, |
| PSIL_EP_PDMA_MCAN, |
| PSIL_EP_PDMA_AASRC, |
| }; |
| |
| /** |
| * struct psil_endpoint_config - PSI-L Endpoint configuration |
| * @ep_type: PSI-L endpoint type |
| * @pkt_mode: If set, the channel must be in Packet mode, otherwise in |
| * TR mode |
| * @notdpkt: TDCM must be suppressed on the TX channel |
| * @needs_epib: Endpoint needs EPIB |
| * @psd_size: If set, PSdata is used by the endpoint |
| * @channel_tpl: Desired throughput level for the channel |
| * @pdma_acc32: ACC32 must be enabled on the PDMA side |
| * @pdma_burst: BURST must be enabled on the PDMA side |
| * @mapped_channel_id: PKTDMA thread to channel mapping for mapped |
| * channels. The thread must be serviced by the specified |
| * channel if mapped_channel_id is >= 0 in case of PKTDMA |
| * @flow_start: PKTDMA flow range start of mapped channel. Unmapped |
| * channels use flow_id == chan_id |
| * @flow_num: PKTDMA flow count of mapped channel. Unmapped |
| * channels use flow_id == chan_id |
| * @default_flow_id: PKTDMA default (r)flow index of mapped channel. |
| * Must be within the flow range of the mapped channel. |
| */ |
| struct psil_endpoint_config { |
| enum psil_endpoint_type ep_type; |
| |
| unsigned pkt_mode:1; |
| unsigned notdpkt:1; |
| unsigned needs_epib:1; |
| u32 psd_size; |
| enum udma_tp_level channel_tpl; |
| |
| /* PDMA properties, valid for PSIL_EP_PDMA_* */ |
| unsigned pdma_acc32:1; |
| unsigned pdma_burst:1; |
| |
| /* PKTDMA mapped channel */ |
| int mapped_channel_id; |
| /* PKTDMA tflow and rflow ranges for mapped channel */ |
| u16 flow_start; |
| u16 flow_num; |
| u16 default_flow_id; |
| }; |
| #endif /* K3_PSIL_H_ */ |