| * Intel FSP-S configuration |
| |
| Several Intel platforms require the execution of the Intel FSP (Firmware |
| Support Package) for initialization. The FSP consists of multiple parts, one |
| of which is the FSP-S (Silicon initialization phase). |
| |
| This binding applies to the FSP-S for the Intel Apollo Lake SoC. |
| |
| The FSP-S is available on Github [1]. |
| For detailed information on the FSP-S parameters see the documentation in |
| FSP/ApolloLakeFspBinPkg/Docs [2]. |
| |
| The properties of this binding are all optional. If no properties are set the |
| values of the FSP-S are used. |
| |
| [1] https://github.com/IntelFsp/FSP |
| [2] https://github.com/IntelFsp/FSP/tree/master/ApolloLakeFspBinPkg/Docs |
| |
| Optional properties: |
| - fsps,active-processor-cores: ActiveProcessorCores |
| - fsps,disable-core1: Disable Core1 |
| - fsps,disable-core2: Disable Core2 |
| - fsps,disable-core2: Disable Core3 |
| - fsps,vmx-enable: VMX Enable |
| - fsps,proc-trace-mem-size: Memory region allocation for Processor Trace |
| 0xFF: Disable (default) |
| - fsps,proc-trace-enable: Enable Processor Trace |
| - fsps,eist: Eist |
| - fsps,boot-p-state: Boot PState |
| 0: HFM (default) |
| 1: LFM |
| - fsps,enable-cx: CPU power states (C-states) |
| - fsps,c1e: Enhanced C-states |
| - fsps,bi-proc-hot: Bi-Directional PROCHOT# |
| - fsps,pkg-c-state-limit: Max Pkg Cstate |
| 0: PkgC0C1 |
| 1: PkgC2 |
| 2: PkgC3 (default) |
| 3: PkgC6 |
| 4: PkgC7 |
| 5: PkgC7s |
| 6: PkgC8 |
| 7: PkgC9 |
| 8: PkgC10 |
| 9: PkgCMax |
| 254: PkgCpuDefault |
| 255: PkgAuto |
| - fsps,c-state-auto-demotion: C-State auto-demotion |
| 0: Disable C1 and C3 Auto-demotion (default) |
| 1: Enable C3/C6/C7 Auto-demotion to C1 |
| 2: Enable C6/C7 Auto-demotion to C3 |
| 3: Enable C6/C7 Auto-demotion to C1 and C3 |
| - fsps,c-state-un-demotion: C-State un-demotion |
| 0: Disable C1 and C3 Un-demotion (default) |
| 1: Enable C1 Un-demotion |
| 2: Enable C3 Un-demotion |
| 3: Enable C1 and C3 Un-demotion |
| - fsps,max-core-c-state: Max Core C-State |
| 0: Unlimited |
| 1: C1 |
| 2: C3 |
| 3: C6 |
| 4: C7 |
| 5: C8 |
| 6: C9 |
| 7: C10 |
| 8: CCx (default) |
| - fsps,pkg-c-state-demotion: Package C-State Demotion |
| - fsps,pkg-c-state-un-demotion: Package C-State Un-demotion |
| - fsps,turbo-mode: Turbo Mode |
| - fsps,hda-verb-table-entry-num: SC HDA Verb Table Entry Number |
| 0: (default) |
| - fsps,hda-verb-table-ptr: SC HDA Verb Table Pointer |
| 0x00000000: (default) |
| - fsps,p2sb-unhide: Enable/Disable P2SB device hidden |
| - fsps,ipu-en: IPU Enable/Disable |
| - fsps,ipu-acpi-mode: IMGU ACPI mode selection |
| 0: Auto |
| 1: IGFX Child device (default) |
| 2: ACPI device |
| - fsps,force-wake: Enable ForceWake |
| - fsps,gtt-mm-adr: GttMmAdr |
| 0xbf000000: (default) |
| - fsps,gm-adr: GmAdr |
| 0xa0000000: (default) |
| - fsps,pavp-lock: Enable PavpLock |
| - fsps,graphics-freq-modify: Enable GraphicsFreqModify |
| - fsps,graphics-freq-req: Enable GraphicsFreqReq |
| - fsps,graphics-video-freq: Enable GraphicsVideoFreq |
| - fsps,pm-lock: Enable PmLock |
| - fsps,dop-clock-gating: Enable DopClockGating |
| - fsps,unsolicited-attack-override: Enable UnsolicitedAttackOverride |
| - fsps,wopcm-support: Enable WOPCMSupport |
| - fsps,wopcm-size: Enable WOPCMSize |
| - fsps,power-gating: Enable PowerGating |
| - fsps,unit-level-clock-gating: Enable UnitLevelClockGating |
| - fsps,fast-boot: Enable FastBoot |
| - fsps,dyn-sr: Enable DynSR |
| - fsps,sa-ipu-enable: Enable SaIpuEnable |
| - fsps,pm-support: GT PM Support |
| - fsps,enable-render-standby: RC6(Render Standby) |
| - fsps,logo-size: BMP Logo Data Size |
| - fsps,logo-ptr: BMP Logo Data Pointer |
| - fsps,graphics-config-ptr: Graphics Configuration Data Pointer |
| - fsps,pavp-enable: PAVP Enable |
| - fsps,pavp-pr3: PAVP PR3 |
| - fsps,cd-clock: CdClock Frequency selection |
| 0: 144MHz |
| 1: 288MHz |
| 2: 384MHz |
| 3: 576MHz |
| 4: 624MHz (default) |
| - fsps,pei-graphics-peim-init: Enable/Disable PeiGraphicsPeimInit |
| - fsps,write-protection-enable: Write Protection Support |
| - fsps,read-protection-enable: Read Protection Support |
| - fsps,protected-range-limit: Protected Range Limitation |
| 0x0FFF: (default) |
| - fsps,protected-range-base: Protected Range Base |
| 0x0000: (default) |
| - fsps,gmm: Enable SC Gaussian Mixture Models |
| - fsps,clk-gating-pgcb-clk-trunk: GMM Clock Gating - PGCB Clock Trunk |
| - fsps,clk-gating-sb: GMM Clock Gating - Sideband |
| - fsps,clk-gating-sb-clk-trunk: GMM Clock Gating - Sideband |
| - fsps,clk-gating-sb-clk-partition: GMM Clock Gating - Sideband Clock |
| Partition |
| - fsps,clk-gating-core: GMM Clock Gating - Core |
| - fsps,clk-gating-dma: GMM Clock Gating - DMA |
| - fsps,clk-gating-reg-access: GMM Clock Gating - Register Access |
| - fsps,clk-gating-host: GMM Clock Gating - Host |
| - fsps,clk-gating-partition: GMM Clock Gating - Partition |
| - fsps,clk-gating-trunk: Clock Gating - Trunk |
| - fsps,hda-enable: HD Audio Support |
| - fsps,dsp-enable: HD Audio DSP Support |
| - fsps,pme: Azalia wake-on-ring |
| - fsps,hd-audio-io-buffer-ownership: HD-Audio I/O Buffer Ownership |
| 0: HD-Audio link owns all the I/O buffers (default) |
| 1: HD-Audio link owns 4 I/O buffers and I2S port owns 4 I/O buffers |
| 3: I2S port owns all the I/O buffers |
| - fsps,hd-audio-io-buffer-voltage: HD-Audio I/O Buffer Voltage |
| 0: 3.3V (default) |
| 1: 1.8V |
| - fsps,hd-audio-vc-type: HD-Audio Virtual Channel Type |
| 0: VC0 (default) |
| 1: VC1 |
| - fsps,hd-audio-link-frequency: HD-Audio Link Frequency |
| 0: 6MHz (default) |
| 1: 12MHz |
| 2: 24MHz |
| 3: 48MHz |
| 4: 96MHz |
| 5: Invalid |
| - fsps,hd-audio-i-disp-link-frequency: HD-Audio iDisp-Link Frequency |
| 0: 6MHz (default) |
| 1: 12MHz |
| 2: 24MHz |
| 3: 48MHz |
| 4: 96MHz |
| 5: Invalid |
| - fsps,hd-audio-i-disp-link-tmode: HD-Audio iDisp-Link T-Mode |
| 0: 2T (default) |
| 1: 1T |
| - fsps,dsp-endpoint-dmic: HD-Audio Disp DMIC |
| 0: disable, |
| 1: 2ch array (default) |
| 2: 4ch array |
| - fsps,dsp-endpoint-bluetooth: HD-Audio Bluetooth |
| - fsps,dsp-endpoint-i2s-skp: HD-Audio I2S SHK |
| - fsps,dsp-endpoint-i2s-hp: HD-Audio I2S HP |
| - fsps,audio-ctl-pwr-gate: HD-Audio Controller Power Gating (deprecated) |
| - fsps,audio-dsp-pwr-gate: HD-Audio ADSP Power Gating (deprecated) |
| - fsps,mmt: HD-Audio CSME Memory Transfers |
| 0: VC0 (default) |
| 1: VC2 |
| - fsps,hmt: HD-Audio Host Memory Transfers |
| 0: VC0 (default) |
| 1: VC2 |
| - fsps,hd-audio-pwr-gate: HD-Audio Power Gating |
| - fsps,hd-audio-clk-gate: HD-Audio Clock Gating |
| - fsps,dsp-feature-mask: Bitmask of DSP Feature |
| 0x01: WoV |
| 0x02: BT Sideband |
| 0x04: Codec VAD |
| 0x20: BT Intel HFP |
| 0x40: BT Intel A2DP |
| 0x80: DSP based speech pre-processing disabled |
| - fsps,dsp-pp-module-mask: Bitmask of supported DSP Post-Processing Modules |
| 0x01: WoV |
| 0x02: BT Sideband |
| 0x04: Codec VAD |
| 0x20: BT Intel HFP |
| 0x40: BT Intel A2DP |
| 0x80: DSP based speech pre-processing disabled |
| - fsps,bios-cfg-lock-down: HD-Audio BIOS Configuration Lock Down |
| - fsps,hpet: Enable High Precision Timer |
| - fsps,hpet-bdf-valid: Hpet Valid BDF Value |
| - fsps,hpet-bus-number: Bus Number of Hpet |
| 0xFA: (default) |
| - fsps,hpet-device-number: Device Number of Hpet |
| 0x1F: (default) |
| - fsps,hpet-function-number: Function Number of Hpet |
| 0x00: (default) |
| - fsps,io-apic-bdf-valid: IoApic Valid BDF Value |
| - fsps,io-apic-bus-number: Bus Number of IoApic |
| 0xFA: (default) |
| - fsps,io-apic-device-number: Device Number of IoApic |
| 0x0F: (default) |
| - fsps,io-apic-function-number: Function Number of IoApic |
| 0x00: (default) |
| - fsps,io-apic-entry24-119: IOAPIC Entry 24-119 |
| - fsps,io-apic-id: IO APIC ID |
| 0x01: (default) |
| - fsps,io-apic-range-select: IoApic Range |
| 0x00: (default) |
| - fsps,ish-enable: ISH Controller |
| - fsps,bios-interface: BIOS Interface Lock Down |
| - fsps,bios-lock: Bios LockDown Enable |
| - fsps,spi-eiss: SPI EISS Status |
| - fsps,bios-lock-sw-smi-number: BiosLock SWSMI Number |
| 0xA9: (default) |
| - fsps,lpss-s0ix-enable: LPSS IOSF PMCTL S0ix Enable |
| - fsps,i2c-clk-gate-cfg: LPSS I2C Clock Gating Configuration |
| - fsps,hsuart-clk-gate-cfg: LPSS HSUART Clock Gating Configuration |
| - fsps,spi-clk-gate-cfg: LPSS SPI Clock Gating Configuration |
| - fsps,i2cX-enable: 2C Device X |
| 0: Disabled |
| 1: PCI Mode (default) |
| 2: ACPI Mode |
| - fsps,hsuartX-enable: UART Device X |
| 0: Disabled |
| 1: PCI Mode (default) |
| 2: ACPI Mode |
| - fsps,spiX-enable: SPI UART Device X |
| 0: Disabled |
| 1: PCI Mode (default) |
| 2: ACPI Mode |
| - fsps,os-dbg-enable: OS Debug Feature |
| - fsps,dci-en: DCI Feature |
| - fsps,uart2-kernel-debug-base-address: UART Debug Base Address |
| 0x00000000: (default) |
| - fsps,pcie-clock-gating-disabled: Enable PCIE Clock Gating |
| - fsps,pcie-root-port8xh-decode: Enable PCIE Root Port 8xh Decode |
| - fsps,pcie8xh-decode-port-index: PCIE 8xh Decode Port Index |
| 0x00: (default) |
| - fsps,pcie-root-port-peer-memory-write-enable: Enable PCIE Root Port Peer |
| Memory Write |
| - fsps,pcie-aspm-sw-smi-number: PCIE SWSMI Number |
| 0xAA: (default) |
| - fsps,pcie-root-port-en: PCI Express Root Port |
| - fsps,pcie-rp-hide: Hide PCIE Root Port Configuration Space |
| - fsps,pcie-rp-slot-implemented: PCIE Root Port Slot Implement |
| - fsps,pcie-rp-hot-plug: Hot Plug |
| - fsps,pcie-rp-pm-sci: PCIE PM SCI |
| - fsps,pcie-rp-ext-sync: PCIE Root Port Extended Sync |
| - fsps,pcie-rp-transmitter-half-swing: Transmitter Half Swing |
| - fsps,pcie-rp-acs: ACS |
| - fsps,pcie-rp-clk-req-supported: Clock Request Support |
| - fsps,pcie-rp-clk-req-number: Configure CLKREQ Number |
| - fsps,pcie-rp-clk-req-detect: CLKREQ# Detection |
| - fsps,advanced-error-reportingt: Advanced Error Reporting |
| - fsps,pme-interrupt: PME Interrupt |
| - fsps,unsupported-request-report: URR |
| - fsps,fatal-error-report: FER |
| - fsps,no-fatal-error-report: NFER |
| - fsps,correctable-error-report: CER |
| - fsps,system-error-on-fatal-error: SEFE |
| - fsps,system-error-on-non-fatal-error: SENFE |
| - fsps,system-error-on-correctable-error: SECE |
| - fsps,pcie-rp-speed: PCIe Speed |
| - fsps,physical-slot-number: Physical Slot Number |
| 0: Auto (default) |
| 1: Gen1 |
| 2: Gen2 |
| 3: Gen3 |
| - fsps,pcie-rp-completion-timeout: CTO |
| 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 (default) |
| - fsps,enable-ptm: PTM Support |
| - fsps,pcie-rp-aspm: ASPM |
| - fsps,pcie-rp-l1-substates: L1 Substates |
| - fsps,pcie-rp-ltr-enable: PCH PCIe LTR |
| - fsps,pcie-rp-ltr-config-lock: PCIE LTR Lock |
| - fsps,pme-b0-s5-di: PME_B0_S5 Disable bit |
| - fsps,pci-clock-run: PCI Clock Run |
| - fsps,timer8254-clk-setting: Enable/Disable Timer 8254 Clock Setting |
| - fsps,enable-sata: Chipset SATA |
| - fsps,sata-mode: SATA Mode Selection |
| 0: AHCI (default) |
| 1: RAID |
| - fsps,sata-salp-support: Aggressive LPM Support |
| - fsps,sata-pwr-opt-enable: SATA Power Optimization |
| - fsps,e-sata-speed-limit: eSATA Speed Limit |
| - fsps,speed-limit: SATA Speed Limit |
| 0x1: 1.5Gb/s(Gen 1) |
| 0x2: 3Gb/s(Gen 2) |
| 0x3: 6Gb/s(Gen 3) |
| - fsps,sata-ports-enable: SATA Port |
| - fsps,sata-ports-dev-slp: SATA Port DevSlp |
| - fsps,sata-ports-hot-plug: SATA Port HotPlug |
| - fsps,sata-ports-interlock-sw: Mechanical Presence Switch |
| - fsps,sata-ports-external: External SATA Ports |
| - fsps,sata-ports-spin-up: Spin Up Device |
| - fsps,sata-ports-solid-state-drive: SATA Solid State |
| 0: Hard Disk Drive (default) |
| 1: Solid State Drive |
| - fsps,sata-ports-enable-dito-config: DITO Configuration |
| - fsps,sata-ports-dm-val: DM Value |
| 0x0F: Maximum (default) |
| - fsps,sata-ports-dito-val: DITO Value |
| 0x0271 (default) |
| - fsps,sub-system-vendor-id: Subsystem Vendor ID |
| 0x8086: (default) |
| - fsps,sub-system-id: Subsystem ID |
| 0x7270: (default) |
| - fsps,crid-setting: CRIDSettings |
| 0: Disable (default) |
| 1: CRID_1 |
| 2: CRID_2 |
| 3: CRID_3 |
| - fsps,reset-select: ResetSelect |
| 0x6: warm reset (default) |
| 0xE: cold reset |
| - fsps,sdcard-enabled: SD Card Support (D27:F0) |
| - fsps,emmc-enabled: SeMMC Support (D28:F0) |
| - fsps,emmc-host-max-speed: eMMC Max Speed |
| 0: HS400(default) |
| 1: HS200 |
| 2: DDR50 |
| - fsps,ufs-enabled: UFS Support (D29:F0) |
| - fsps,sdio-enabled: SDIO Support (D30:F0) |
| - fsps,gpp-lock: GPP Lock Feature |
| - fsps,sirq-enable: Serial IRQ |
| - fsps,sirq-mode: Serial IRQ Mode |
| 0: Quiet mode (default) |
| 1: Continuous mode |
| - fsps,start-frame-pulse: Start Frame Pulse Width |
| 0: ScSfpw4Clk (default) |
| 1: ScSfpw6Clk |
| 2: ScSfpw8Clk |
| - fsps,smbus-enable: SMBus |
| - fsps,arp-enable: SMBus ARP Support |
| - fsps,num-rsvd-smbus-addresses: SMBus Table Elements |
| 0x0080: (default) |
| - fsps,rsvd-smbus-address-table: Reserved SMBus Address Table |
| 0x00: (default) |
| - fsps,disable-compliance-mode: XHCI Disable Compliance Mode |
| - fsps,usb-per-port-ctl: USB Per-Port Control |
| - fsps,usb30-mode: xHCI Mode |
| 0: Disable |
| 1: Enable |
| 2: Auto (default) |
| - fsps,port-usb20-enable: Enable USB2 ports |
| - fsps,port-usb20-over-current-pin: USB20 Over Current Pin |
| - fsps,usb-otg: XDCI Support |
| 0: Disable |
| 1: PCI_Mode (default) |
| 2: ACPI_mode |
| - fsps,hsic-support-enable: Enable XHCI HSIC Support |
| - fsps,port-usb30-enable: Enable USB3 ports |
| - fsps,port-usb30-over-current-pin: USB30 Over Current Pin |
| - fsps,ssic-port-enable: Enable XHCI SSIC Support |
| - fsps,dlane-pwr-gating: SSIC Dlane PowerGating |
| - fsps,vtd-enable: VT-d |
| - fsps,lock-down-global-smi: SMI Lock bit |
| - fsps,reset-wait-timer: HDAudio Delay Timer |
| 0x012C: (default) |
| - fsps,rtc-lock: RTC Lock Bits |
| - fsps,sata-test-mode: SATA Test Mode Selection |
| - fsps,ssic-rate: XHCI SSIC RATE |
| 1: A Series (default) |
| 2: B Series |
| - fsps,dynamic-power-gating: SMBus Dynamic Power Gating |
| - fsps,pcie-rp-ltr-max-snoop-latency: Max Snoop Latency |
| 0x0000: (default) |
| - fsps,pcie-rp-snoop-latency-override-mode: Snoop Latency Override |
| 0: Disable |
| 1: Enable |
| 2: Auto (default) |
| - fsps,pcie-rp-snoop-latency-override-value: Snoop Latency Value |
| 0x003C (default) |
| - fsps,pcie-rp-snoop-latency-override-multiplier: Snoop Latency Multiplier |
| 0: 1ns |
| 1: 32ns |
| 2: 1024ns (default) |
| 3: 32768ns |
| 4: 1048576ns |
| 5: 33554432ns |
| - fsps,skip-mp-init: Skip Multi-Processor Initialization |
| - fsps,dci-auto-detect: DCI Auto Detect |
| - fsps,pcie-rp-ltr-max-non-snoop-latency: Max Non-Snoop Latency |
| 0x0000: (default) |
| - fsps,pcie-rp-non-snoop-latency-override-mode: Non Snoop Latency Override |
| - fsps,tco-timer-halt-lock: Halt and Lock TCO Timer |
| - fsps,pwr-btn-override-period: Power Button Override Period |
| 000: 4s (default) |
| 001: 6s |
| 010: 8s |
| 011: 10s |
| 100: 12s |
| 101: 14s |
| - fsps,pcie-rp-non-snoop-latency-override-value: |
| 0x003C: (default) |
| - fsps,pcie-rp-non-snoop-latency-override-multiplier: Non Snoop Latency Value |
| 0: 1ns |
| 1: 32ns |
| 2: 1024ns (default) |
| 3: 32768ns |
| 4: 1048576ns |
| 5: 33554432ns |
| - fsps,pcie-rp-slot-power-limit-scale: PCIE Root Port Slot Power Limit Scale |
| 0x00: (default) |
| - fsps,pcie-rp-slot-power-limit-value: |
| 0x00: (default) |
| - fsps,disable-native-power-button: Power Button Native Mode Disable |
| - fsps,power-butter-debounce-mode: Power Button Debounce Mode |
| - fsps,sdio-tx-cmd-cntl: SDIO_TX_CMD_DLL_CNTL |
| 0x505: (default) |
| - fsps,sdio-tx-data-cntl1: SDIO_TX_DATA_DLL_CNTL1 |
| 0xE: (default) |
| - fsps,sdio-tx-data-cntl2: SDIO_TX_DATA_DLL_CNTL2 |
| 0x22272828: (default) |
| - fsps,sdio-rx-cmd-data-cntl1: SDIO_RX_CMD_DATA_DLL_CNTL1 |
| 0x16161616: (default) |
| - fsps,sdio-rx-cmd-data-cntl2: SDIO_RX_CMD_DATA_DLL_CNTL2 |
| 0x10000: (default) |
| - fsps,sdcard-tx-cmd-cntl: SDCARD_TX_CMD_DLL_CNTL |
| 0x505 (default) |
| - fsps,sdcard-tx-data-cntl1: SDCARD_TX_DATA_DLL_CNTL1 |
| 0xA13: (default) |
| - fsps,sdcard-tx-data-cntl2: SDCARD_TX_DATA_DLL_CNTL2 |
| 0x24242828: (default) |
| - fsps,sdcard-rx-cmd-data-cntl1: SDCARD_RX_CMD_DATA_DLL_CNTL1 |
| 0x73A3637 (default) |
| - fsps,sdcard-rx-strobe-cntl: SDCARD_RX_STROBE_DLL_CNTL |
| 0x0: (default) |
| - fsps,sdcard-rx-cmd-data-cntl2: SDCARD_RX_CMD_DATA_DLL_CNTL2 |
| 0x10000: (default) |
| - fsps,emmc-tx-cmd-cntl: EMMC_TX_CMD_DLL_CNTL |
| 0x505: (default) |
| - fsps,emmc-tx-data-cntl1: EMMC_TX_DATA_DLL_CNTL1 |
| 0xC11: (default) |
| - fsps,emmc-tx-data-cntl2: EMMC_TX_DATA_DLL_CNTL2 |
| 0x1C2A2927: (default) |
| - fsps,emmc-rx-cmd-data-cntl1: EMMC_RX_CMD_DATA_DLL_CNTL1 |
| 0x000D162F: (default) |
| - fsps,emmc-rx-strobe-cntl: EMMC_RX_STROBE_DLL_CNTL |
| 0x0a0a: (default) |
| - fsps,emmc-rx-cmd-data-cntl2: EMMC_RX_CMD_DATA_DLL_CNTL2 |
| 0x1003b: (default) |
| - fsps,emmc-master-sw-cntl: EMMC_MASTER_DLL_CNTL |
| 0x001: (default) |
| - fsps,pcie-rp-selectable-deemphasis: PCIe Selectable De-emphasis |
| 1: -3.5 dB (default) |
| 0: -6 dB |
| - fsps,monitor-mwait-enable: Monitor Mwait Enable |
| - fsps,hd-audio-dsp-uaa-compliance: Universal Audio Architecture |
| compliance for DSP enabled system |
| - fsps,ipc: IRQ Interrupt Polarity Control |
| - fsps,sata-ports-disable-dynamic-pg: Disable ModPHY dynamic power gate |
| - fsps,init-s3-cpu: Init CPU during S3 resume |
| - fsps,skip-punit-init: Skip P-unit Initialization |
| - fsps,port-usb20-per-port-tx-pe-half: PerPort Half Bit Pre-emphasis |
| - fsps,port-usb20-per-port-pe-txi-set: PerPort HS Pre-emphasis Bias |
| - fsps,port-usb20-per-port-txi-set: PerPort HS Transmitter Bias |
| - fsps,port-usb20-hs-skew-sel: Select the skew direction for HS transition |
| - fsps,port-usb20-i-usb-tx-emphasis-en: PerPort HS Transmitter Emphasis |
| - fsps,port-usb20-per-port-rxi-set: PerPort HS Receiver Bias |
| - fsps,port-usb20-hs-npre-drv-sel: Delay/skew's strength control for HS driver |
| - fsps,os-selection: OS Selection |
| 0: Windows |
| 1: Android |
| 3: Linux |
| - fsps,dptf-enabled: DPTF |
| - fsps,pwm-enabled: PWM Enabled |
| |
| Example: |
| |
| &fsp_s { |
| bootph-some-ram; |
| |
| fsps,ish-enable = <0>; |
| fsps,enable-sata = <0>; |
| fsps,pcie-root-port-en = [00 00 00 00 00 01]; |
| fsps,pcie-rp-hot-plug = [00 00 00 00 00 01]; |
| fsps,i2c6-enable = <I2CX_ENABLE_DISABLED>; |
| fsps,i2c7-enable = <I2CX_ENABLE_DISABLED>; |
| fsps,hsuart3-enable = <HSUARTX_ENABLE_DISABLED>; |
| fsps,spi1-enable = <SPIX_ENABLE_DISABLED>; |
| fsps,spi2-enable = <SPIX_ENABLE_DISABLED>; |
| fsps,sdio-enabled = <0>; |
| ... |
| }; |