ARM: dts: stm32mp1: use OPP information for PLL1 settings in SPL
This patch allows to switch the CPU frequency to 800MHz on the
ST Microelectronics board (DK1/DK2 and EV1) or dh electronics SOM
using the STM32MP15x SOC and when it is supported by the HW
(for STM32MP15xD and STM32MP15xF).
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi
index a0d971a..66be7df 100644
--- a/arch/arm/dts/stm32mp15-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15-u-boot.dtsi
@@ -88,6 +88,16 @@
u-boot,dm-pre-reloc;
};
+&cpu0_opp_table {
+ u-boot,dm-spl;
+ opp-650000000 {
+ u-boot,dm-spl;
+ };
+ opp-800000000 {
+ u-boot,dm-spl;
+ };
+};
+
&gpioa {
u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
index e13dade..7b8c1c1 100644
--- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
@@ -133,15 +133,6 @@
CLK_LPTIM45_LSE
>;
- /* VCO = 1300.0 MHz => P = 650 (CPU) */
- pll1: st,pll@0 {
- compatible = "st,stm32mp1-pll";
- reg = <0>;
- cfg = < 2 80 0 0 0 PQR(1,0,0) >;
- frac = < 0x800 >;
- u-boot,dm-pre-reloc;
- };
-
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
pll2: st,pll@1 {
compatible = "st,stm32mp1-pll";
diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
index b16dc28..ef3e7f4 100644
--- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -129,15 +129,6 @@
CLK_LPTIM45_LSE
>;
- /* VCO = 1300.0 MHz => P = 650 (CPU) */
- pll1: st,pll@0 {
- compatible = "st,stm32mp1-pll";
- reg = <0>;
- cfg = < 2 80 0 0 0 PQR(1,0,0) >;
- frac = < 0x800 >;
- u-boot,dm-pre-reloc;
- };
-
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
pll2: st,pll@1 {
compatible = "st,stm32mp1-pll";
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index df63ad4..69c5af4 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -235,15 +235,6 @@
CLK_LPTIM45_LSE
>;
- /* VCO = 1300.0 MHz => P = 650 (CPU) */
- pll1: st,pll@0 {
- compatible = "st,stm32mp1-pll";
- reg = <0>;
- cfg = < 2 80 0 0 0 PQR(1,0,0) >;
- frac = < 0x800 >;
- u-boot,dm-pre-reloc;
- };
-
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
pll2: st,pll@1 {
compatible = "st,stm32mp1-pll";
diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
index bd4c2ad..7529068 100644
--- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
@@ -114,15 +114,6 @@
CLK_LPTIM45_LSE
>;
- /* VCO = 1300.0 MHz => P = 650 (CPU) */
- pll1: st,pll@0 {
- compatible = "st,stm32mp1-pll";
- reg = <0>;
- cfg = < 2 80 0 0 0 PQR(1,0,0) >;
- frac = < 0x800 >;
- u-boot,dm-pre-reloc;
- };
-
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
pll2: st,pll@1 {
compatible = "st,stm32mp1-pll";