ARM64: zynqmp: Add SPL support support
Support RAM and MMC boot mode in SPL also with SPL_FIT images.
In MMC boot mode two boot options are available:
1) Boot flow with ATF(EL3) and full U-Boot(EL2):
aarch64-linux-gnu-objcopy -O binary bl31.elf bl31.bin
mkimage -A arm64 -O linux -T kernel -C none -a 0xfffe5000 -e 0xfffe5000
-d bl31.bin atf.ub
cp spl/boot.bin <sdcard fat partition>
cp atf.ub <sdcard fat partition>
cp u-boot.bin <sdcard fat partition>
2) Boot flow with full U-Boot(EL3):
cp spl/boot.bin <sdcard>
cp u-boot*.img <sdcard>
3) emmc boot mode
dd if=/dev/zero of=sd.img bs=1024 count=1024
parted sd.img mktable msdos
parted sd.img mkpart p fat32 0% 100%
kpartx -a sd.img
mkfs.vfat /dev/mapper/loop0p1
mount /dev/mapper/loop0p1 /mnt/
cp spl/boot.bin /mnt
cp u-boot.img /mnt
cp u-boot.bin /mnt
cp atf.ub /mnt
umount /dev/mapper/loop0p1
kpartx -d sd.img
cp sd.img /tftpboot/
and program it via u-boot
tftpb 10000 sd.img
mmcinfo
mmc write 10000 0 $filesize
mmc rescan
mmc part
ls mmc 0
psu_init() function contains low level SoC setup generated for every HW
design by Xilinx design tools. xil_io.h is only supporting file to fix
all dependencies from tools. The same solution was used on Xilinx Zynq.
The patch also change CONFIG_SYS_INIT_SP_ADDR to the end of OCM which
stays at the same location all the time.
Bootrom expects starting address to be at 0xfffc0000 that's why this
address is SPL_TEXT_BASE.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/board/xilinx/zynqmp/xil_io.h b/board/xilinx/zynqmp/xil_io.h
new file mode 100644
index 0000000..57ca4ad
--- /dev/null
+++ b/board/xilinx/zynqmp/xil_io.h
@@ -0,0 +1,35 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef XIL_IO_H /* prevent circular inclusions */
+#define XIL_IO_H
+
+/* FIXME remove this when vivado is fixed */
+#include <asm/io.h>
+
+#define xil_printf(...)
+
+void Xil_ICacheEnable(void)
+{}
+
+void Xil_DCacheEnable(void)
+{}
+
+void Xil_ICacheDisable(void)
+{}
+
+void Xil_DCacheDisable(void)
+{}
+
+void Xil_Out32(unsigned long addr, unsigned long val)
+{
+ writel(val, addr);
+}
+
+int Xil_In32(unsigned long addr)
+{
+ return readl(addr);
+}
+
+#endif /* XIL_IO_H */