configs: Remove unused or redundant CONFIG symbols
A number of CONFIG symbols have crept in that are never referenced in
code, so drop them here. Further, we have two symbols being enabled
in headers while already enabled correctly in Kconfig, so these lines
can also be removed.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 2862257..9656c52 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -29,6 +29,7 @@
select ESBC_HDR_LS if CHAIN_OF_TRUST
select FSL_LAYERSCAPE
select FSL_LSCH3
+ select FSL_TZASC_400
select GICV3
select NXP_LSCH3_2
select SYS_FSL_HAS_CCI400
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 12758c8..516c9ea 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -160,7 +160,6 @@
#elif defined(CONFIG_ARCH_LS1028A)
#define CFG_SYS_FSL_CLUSTER_CLOCKS { 1, 1 }
-#define CONFIG_FSL_TZASC_400
/* TZ Protection Controller Definitions */
#define TZPC_BASE 0x02200000
diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h
index 96a0810..6102747 100644
--- a/arch/arm/mach-mvebu/include/mach/config.h
+++ b/arch/arm/mach-mvebu/include/mach/config.h
@@ -27,7 +27,4 @@
#define MV_UART_CONSOLE_BASE MVEBU_UART0_BASE
-/* Needed for SPI NOR booting in SPL */
-#define CONFIG_DM_SEQ_ALIAS 1
-
#endif /* __MVEBU_CONFIG_H */
diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h
index 91454df..98d4d8c 100644
--- a/include/configs/cgtqmx8.h
+++ b/include/configs/cgtqmx8.h
@@ -12,7 +12,6 @@
#include <asm/arch/imx-regs.h>
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SERIAL_LPUART_BASE 0x5a060000
#define CFG_MALLOC_F_ADDR 0x00120000
#endif
diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h
index 495ca31..d4ab6a6 100644
--- a/include/configs/imx8mp_rsb3720.h
+++ b/include/configs/imx8mp_rsb3720.h
@@ -28,14 +28,8 @@
* GD_FLG_FULL_MALLOC_INIT \
* set \
*/
-
-
-#if defined(CONFIG_NAND_BOOT)
-#define CONFIG_SPL_NAND_MXS
#endif
-#endif
-
/* ENET Config */
/* ENET1 */
#if defined(CONFIG_CMD_NET)
@@ -158,9 +152,6 @@
#define FSL_FSPI_FLASH_NUM 1
#define FSPI0_BASE_ADDR 0x30bb0000
#define FSPI0_AMBA_BASE 0x0
-#define CONFIG_FSPI_QUAD_SUPPORT
-
-#define CONFIG_SYS_FSL_FSPI_AHB
#endif
#ifdef CONFIG_NAND_MXS
diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h
index 828bd67..7cf482d 100644
--- a/include/configs/imx8mq_cm.h
+++ b/include/configs/imx8mq_cm.h
@@ -11,7 +11,6 @@
#include <asm/arch/imx-regs.h>
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x182000
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index d2de290..d2e1649 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -12,7 +12,6 @@
#ifdef CONFIG_SPL_BUILD
/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x182000
diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h
index bfde15e..b66fc18 100644
--- a/include/configs/imx8mq_phanbell.h
+++ b/include/configs/imx8mq_phanbell.h
@@ -11,7 +11,6 @@
#ifdef CONFIG_SPL_BUILD
/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x182000
diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h
index a25efbb..4d5abe2 100644
--- a/include/configs/imx8qm_mek.h
+++ b/include/configs/imx8qm_mek.h
@@ -11,7 +11,6 @@
#include <asm/arch/imx-regs.h>
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SERIAL_LPUART_BASE 0x5a060000
#define CFG_MALLOC_F_ADDR 0x00120000
#endif
diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index 4f55ae4..9399950 100644
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -11,7 +11,6 @@
#include <asm/arch/imx-regs.h>
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SERIAL_LPUART_BASE 0x5a060000
#define CFG_MALLOC_F_ADDR 0x00120000
#endif
diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h
index e3a021c..5cf6b5a 100644
--- a/include/configs/kontron_pitx_imx8m.h
+++ b/include/configs/kontron_pitx_imx8m.h
@@ -13,7 +13,6 @@
0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99)
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x182000
diff --git a/include/configs/librem5.h b/include/configs/librem5.h
index e17190c..ce0a340 100644
--- a/include/configs/librem5.h
+++ b/include/configs/librem5.h
@@ -15,12 +15,6 @@
#include <linux/sizes.h>
#include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD
-
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */
-
-#endif /* CONFIG_SPL_BUILD*/
-
#define CFG_SYS_FSL_USDHC_NUM 2
#define CONSOLE_ON_UART1
diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
index 4b602ea..be31f8a 100644
--- a/include/configs/pico-imx8mq.h
+++ b/include/configs/pico-imx8mq.h
@@ -11,7 +11,6 @@
#ifdef CONFIG_SPL_BUILD
/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x182000