diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 8601eec..ac75b9c 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -14,23 +14,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_U_BOOT
-#define CONFIG_RAMBOOT_NAND
-#endif
-
-#ifdef CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_TEXT_BASE_SPL	0xfff00000
-#define CONFIG_SYS_TEXT_BASE		0x11001000
-
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif /* CONFIG_NAND_SPL */
-#endif
-
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE	0xeff40000
 #endif
@@ -162,7 +145,6 @@
 #define CONFIG_SYS_BCSR_BASE		0xe0000000 /* start of on board FPGA */
 #define CONFIG_SYS_BCSR_BASE_PHYS	CONFIG_SYS_BCSR_BASE
 
-#ifndef CONFIG_NAND
 #define CONFIG_SYS_FLASH_BASE		0xee000000 /* start of FLASH 32M */
 
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
@@ -179,11 +161,8 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* sectors per device */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-#else
-#define CONFIG_SYS_NO_FLASH
-#endif
 
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
+#if defined(CONFIG_SYS_SPL)
 #define CONFIG_SYS_RAMBOOT
 #endif
 
@@ -239,17 +218,6 @@
 				| OR_FCM_TRLX \
 				| OR_FCM_EHTR)
 
-#ifdef CONFIG_RAMBOOT_NAND
-/* NAND Base Address */
-#define CONFIG_SYS_BR0_PRELIM	CONFIG_SYS_NAND_BR_PRELIM
-#define CONFIG_SYS_OR0_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-/* chip select 1 - BCSR */
-#define CONFIG_SYS_BR1_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_BCSR_BASE_PHYS) \
-				| BR_MS_GPCM | BR_PS_8 | BR_V)
-#define CONFIG_SYS_OR1_PRELIM  (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \
-				| OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \
-				| OR_GPCM_EAD)
-#else
 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM	/* NOR Options */
 /* chip select 1 - BCSR */
@@ -258,7 +226,6 @@
 #define CONFIG_SYS_OR1_PRELIM  (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \
 				| OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \
 				| OR_GPCM_EAD)
-#endif
 
 /* Serial Port
  * open - index 2
@@ -381,15 +348,9 @@
 #define CONFIG_ENV_OVERWRITE
 
 #if defined(CONFIG_SYS_RAMBOOT)
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET	((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
 #define CONFIG_ENV_IS_NOWHERE	/* Store ENV in memory only */
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x4000)
 #define CONFIG_ENV_SIZE		0x2000
-#endif
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
@@ -496,15 +457,10 @@
 #define CONFIG_PHY_MARVELL
 #endif
 
-#ifndef CONFIG_NAND
 /* Default address of microcode for the Linux Fman driver */
 /* QE microcode/firmware address */
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_FMAN_FW_ADDR	0xEFF00000
-#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_FMAN_FW_ADDR	0x1f00000
-#endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)