arm: dts: imx8mm-venice-gw7901.dts: fix dsa switch configuration
Fix the dsa switch config:
- remove the unnecessary phy-mode from the switch itself
- added the necessary fixed-link node to the non-cpu ports required
for U-Boot DSA
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
diff --git a/arch/arm/dts/imx8mm-venice-gw7901.dts b/arch/arm/dts/imx8mm-venice-gw7901.dts
index 0216fac..124e1e4 100644
--- a/arch/arm/dts/imx8mm-venice-gw7901.dts
+++ b/arch/arm/dts/imx8mm-venice-gw7901.dts
@@ -577,7 +577,6 @@
pinctrl-0 = <&pinctrl_ksz>;
interrupt-parent = <&gpio4>;
interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
- phy-mode = "rgmii-id";
ports {
#address-cells = <1>;
@@ -587,24 +586,32 @@
reg = <0>;
label = "lan1";
local-mac-address = [00 00 00 00 00 00];
+ phy-handle = <&sw_phy0>;
+ phy-mode = "internal";
};
lan2: port@1 {
reg = <1>;
label = "lan2";
local-mac-address = [00 00 00 00 00 00];
+ phy-handle = <&sw_phy1>;
+ phy-mode = "internal";
};
lan3: port@2 {
reg = <2>;
label = "lan3";
local-mac-address = [00 00 00 00 00 00];
+ phy-handle = <&sw_phy2>;
+ phy-mode = "internal";
};
lan4: port@3 {
reg = <3>;
label = "lan4";
local-mac-address = [00 00 00 00 00 00];
+ phy-handle = <&sw_phy3>;
+ phy-mode = "internal";
};
port@5 {
@@ -619,6 +626,34 @@
};
};
};
+
+ mdios {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0>;
+ compatible = "microchip,ksz-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sw_phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ sw_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ sw_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ sw_phy3: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+ };
+ };
};
crypto@60 {