diff --git a/README b/README
index 1c1db98..a3f81e4 100644
--- a/README
+++ b/README
@@ -2776,9 +2776,6 @@
   CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM:
 		Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM)
 
-- CONFIG_PCI_INDIRECT_BRIDGE:
-		Enable support for indirect PCI bridges.
-
 - CONFIG_SYS_SRIO:
 		Chip has SRIO or not
 
diff --git a/arch/Kconfig b/arch/Kconfig
index b6f9e17..8f8daad 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -182,7 +182,6 @@
 	select SUPPORT_TPL
 	select CREATE_ARCH_SYMLINK
 	select DM
-	select DM_PCI
 	select HAVE_ARCH_IOMAP
 	select HAVE_PRIVATE_LIBGCC
 	select OF_CONTROL
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2d59562..b5bd328 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1681,7 +1681,7 @@
 	select DM_SPI_FLASH
 	select DM_ETH
 	select DM_MDIO
-	select DM_PCI
+	select PCI
 	select DM_RNG
 	select DM_RTC
 	select DM_SCSI
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 789a50d..515c302 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -237,7 +237,7 @@
 	select DM_ETH
 	select DM_GPIO
 	select DM_MMC
-	select DM_PCI
+	select PCI
 	select DM_SCSI
 	select DM_VIDEO
 	select OF_CONTROL
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 6b1f10d..a5cec38 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -17,7 +17,7 @@
 	select BOARD_EARLY_INIT_R
 	select DM
 	select DM_SERIAL
-	select DM_PCI
+	select PCI
 	select DM_ETH
 	select DYNAMIC_IO_PORT_BASE
 	select MIPS_CM
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 3954235..66ebaf5 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -178,12 +178,6 @@
 	bool "Support kmcent2"
 	select VENDOR_KM
 
-config TARGET_UCP1020
-	bool "Support uCP1020"
-	select ARCH_P1020
-	imply CMD_SATA
-	imply PANIC_HANG
-
 endchoice
 
 config ARCH_B4420
@@ -1147,6 +1141,5 @@
 source "board/freescale/t4rdb/Kconfig"
 source "board/keymile/Kconfig"
 source "board/socrates/Kconfig"
-source "board/Arcturus/ucp1020/Kconfig"
 
 endmenu
diff --git a/board/Arcturus/ucp1020/Kconfig b/board/Arcturus/ucp1020/Kconfig
deleted file mode 100644
index fe2c3be..0000000
--- a/board/Arcturus/ucp1020/Kconfig
+++ /dev/null
@@ -1,36 +0,0 @@
-if TARGET_UCP1020
-
-config SYS_BOARD
-	string
-	default "ucp1020"
-
-config SYS_VENDOR
-	string
-	default "Arcturus"
-
-config SYS_CONFIG_NAME
-	string
-	default "UCP1020"
-
-choice
-	prompt "Target image select"
-
-config TARGET_UCP1020_NOR
-	bool "NOR flash u-boot image"
-
-config TARGET_UCP1020_SPIFLASH
-	bool "SPI flash u-boot image"
-
-endchoice
-
-if TARGET_UCP1020_SPIFLASH
-config UCBOOT
-	bool
-	default y
-
-config SPIFLASH
-	bool
-	default y
-endif
-
-endif
diff --git a/board/Arcturus/ucp1020/MAINTAINERS b/board/Arcturus/ucp1020/MAINTAINERS
deleted file mode 100644
index e4a4718..0000000
--- a/board/Arcturus/ucp1020/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-UCP1020 BOARD
-M:	Oleksandr Zhadan and Michael Durrant <arcsupport@arcturusnetworks.com>
-S:	Maintained
-F:	board/Arcturus/ucp1020/
-F:	include/configs/UCP1020.h
-F:	configs/UCP1020_defconfig
-F:	configs/UCP1020_SPIFLASH_defconfig
diff --git a/board/Arcturus/ucp1020/Makefile b/board/Arcturus/ucp1020/Makefile
deleted file mode 100644
index 46d04fb..0000000
--- a/board/Arcturus/ucp1020/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2013-2015 Arcturus Networks, Inc.
-# based on board/freescale/p1_p2_rdb_pc/Makefile
-# original copyright follows:
-# Copyright 2010-2011 Freescale Semiconductor, Inc.
-
-MINIMAL=
-
-ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_INIT_MINIMAL
-MINIMAL=y
-endif
-endif
-
-ifdef MINIMAL
-
-obj-y	+= spl_minimal.o tlb.o law.o
-
-else
-ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
-endif
-
-obj-y        += ucp1020.o
-obj-y        += ddr.o
-obj-y        += law.o
-obj-y        += tlb.o
-obj-y        += cmd_arc.o
-
-endif
diff --git a/board/Arcturus/ucp1020/README b/board/Arcturus/ucp1020/README
deleted file mode 100644
index 555c4ef..0000000
--- a/board/Arcturus/ucp1020/README
+++ /dev/null
@@ -1,54 +0,0 @@
-The uCP1020 product family (ucp1020) is an Arcturus Networks Inc. System on Modules
-product featuring a Freescale P1020 CPU, optionally populated with 1, 2 or 3 Gig-Ethernet PHYs,
-DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash.
-
-Information on the generic product family can be found here:
-	http://www.arcturusnetworks.com/products/ucp1020
-
-The UCP1020 several configurable options
-========================================
-
-- the selection of populated phy(s):
-	KSZ9031 (current default for eTSEC 1 and 3)
-
-- the selection of boot location:
-	SPI Flash or NOR flash
-
-The UCP1020 includes 2 default configurations
-=============================================
-NOR boot image:
-	configs/UCP1020_defconfig
-SPI boot image:
-	configs/UCP1020_SPIFLASH_defconfig
-
-The UCP1020 adds an additional command in cmd_arc.c to access and program
-SPI resident factory defaults for serial number, and 1, 2 or 3 Ethernet
-HW Addresses.
-
-
-Build example
-=============
-
-make distclean
-make UCP1020_defconfig
-make
-
-Default Scripts
-===============
-A default upgrade scripts is included in the default environment variable example:
-
-B$ run tftpflash
-
-Dual Environment
-================
-
-This build enables dual / failover environment environment.
-
-NOR Flash Partition declarations and scripts
-============================================
-Several scripts are available to allow TFTP of images and programming directly
-into defined NOR flash partitions. Examples:
-
-B$ run program0
-B$ run program1
-B$ run program2
diff --git a/board/Arcturus/ucp1020/cmd_arc.c b/board/Arcturus/ucp1020/cmd_arc.c
deleted file mode 100644
index 4b30b66..0000000
--- a/board/Arcturus/ucp1020/cmd_arc.c
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
-/*
- * Command for accessing Arcturus factory environment.
- *
- * Copyright 2013-2019 Arcturus Networks Inc.
- *           https://www.arcturusnetworks.com/products/
- *           by Oleksandr G Zhadan et al.
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <cpu_func.h>
-#include <div64.h>
-#include <env.h>
-#include <flash.h>
-#include <malloc.h>
-#include <spi_flash.h>
-#include <mmc.h>
-#include <version.h>
-#include <asm/io.h>
-#include <linux/stringify.h>
-
-static ulong fwenv_addr[MAX_FWENV_ADDR];
-const char mystrerr[] = "ERROR: Failed to save factory info";
-
-static int ishwaddr(char *hwaddr)
-{
-	if (strlen(hwaddr) == MAX_HWADDR_SIZE)
-		if (hwaddr[2] == ':' &&
-		    hwaddr[5] == ':' &&
-		    hwaddr[8] == ':' &&
-		    hwaddr[11] == ':' &&
-		    hwaddr[14] == ':')
-			return 0;
-	return -1;
-}
-
-#if (FWENV_TYPE == FWENV_MMC)
-
-static char smac[29][18] __attribute__ ((aligned(0x200)));	/* 1 MMC block is 512 bytes */
-
-int set_mmc_arc_product(int argc, char *const argv[])
-{
-	struct mmc *mmc;
-	u32 blk, cnt, n;
-	int i, err = 1;
-	void *addr;
-	const u8 mmc_dev_num = CONFIG_SYS_MMC_ENV_DEV;
-
-	mmc = find_mmc_device(mmc_dev_num);
-	if (!mmc) {
-		printf("No SD/MMC/eMMC card found\n");
-		return 0;
-	}
-	if (mmc_init(mmc)) {
-		printf("%s(%d) init failed\n", IS_SD(mmc) ? "SD" : "MMC",
-		       mmc_dev_num);
-		return 0;
-	}
-	if (mmc_getwp(mmc) == 1) {
-		printf("Error: card is write protected!\n");
-		return CMD_RET_FAILURE;
-	}
-
-	/* Save factory defaults */
-	addr = (void *)smac;
-	cnt = 1;		/* One 512 bytes block */
-
-	for (i = 0; i < MAX_FWENV_ADDR; i++)
-		if (fwenv_addr[i] != -1) {
-			blk = fwenv_addr[i] / 512;
-			n = blk_dwrite(mmc_get_blk_desc(mmc), blk, cnt, addr);
-			if (n != cnt)
-				printf("%s: %s [%d]\n", __func__, mystrerr, i);
-			else
-				err = 0;
-		}
-	if (err)
-		return -2;
-
-	return err;
-}
-
-static int read_mmc_arc_info(void)
-{
-	struct mmc *mmc;
-	u32 blk, cnt, n;
-	int i;
-	void *addr;
-	const u8 mmc_dev_num = CONFIG_SYS_MMC_ENV_DEV;
-
-	mmc = find_mmc_device(mmc_dev_num);
-	if (!mmc) {
-		printf("No SD/MMC/eMMC card found\n");
-		return 0;
-	}
-	if (mmc_init(mmc)) {
-		printf("%s(%d) init failed\n", IS_SD(mmc) ? "SD" : "MMC",
-		       mmc_dev_num);
-		return 0;
-	}
-
-	addr = (void *)smac;
-	cnt = 1;		/* One 512 bytes block */
-
-	for (i = 0; i < MAX_FWENV_ADDR; i++)
-		if (fwenv_addr[i] != -1) {
-			blk = fwenv_addr[i] / 512;
-			n = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, addr);
-			flush_cache((ulong) addr, 512);
-			if (n == cnt)
-				return (i + 1);
-		}
-	return 0;
-}
-#endif
-
-#if (FWENV_TYPE == FWENV_SPI_FLASH)
-
-static struct spi_flash *flash;
-static char smac[4][18];
-
-int set_spi_arc_product(int argc, char *const argv[])
-{
-	int i, err = 1;
-
-	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
-				CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
-	if (!flash) {
-		printf("Failed to initialize SPI flash at %u:%u\n",
-		       CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS);
-		return -1;
-	}
-
-	/* Save factory defaults */
-	for (i = 0; i < MAX_FWENV_ADDR; i++)
-		if (fwenv_addr[i] != -1)
-			if (spi_flash_write
-			    (flash, fwenv_addr[i], sizeof(smac), smac))
-				printf("%s: %s [%d]\n", __func__, mystrerr, i);
-			else
-				err = 0;
-	if (err)
-		return -2;
-
-	return err;
-}
-
-static int read_spi_arc_info(void)
-{
-	int i;
-
-	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
-				CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
-	if (!flash) {
-		printf("Failed to initialize SPI flash at %u:%u\n",
-		       CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS);
-		return 0;
-	}
-	for (i = 0; i < MAX_FWENV_ADDR; i++)
-		if (fwenv_addr[i] != -1)
-			if (!spi_flash_read
-			    (flash, fwenv_addr[i], sizeof(smac), smac))
-				return (i + 1);
-	return 0;
-}
-#endif
-
-#if (FWENV_TYPE == FWENV_NOR_FLASH)
-
-static char smac[4][18];
-
-int set_nor_arc_product(int argc, char *const argv[])
-{
-	int i, err = 1;
-
-	/* Save factory defaults */
-	for (i = 0; i < MAX_FWENV_ADDR; i++)
-		if (fwenv_addr[i] != -1) {
-			ulong fwenv_end = fwenv_addr[i] + 4;
-
-			flash_sect_roundb(&fwenv_end);
-			flash_sect_protect(0, fwenv_addr[i], fwenv_end);
-			if (flash_write
-			    ((char *)smac, fwenv_addr[i], sizeof(smac)))
-				printf("%s: %s [%d]\n", __func__, mystrerr, i);
-			else
-				err = 0;
-			flash_sect_protect(1, fwenv_addr[i], fwenv_end);
-		}
-	if (err)
-		return -2;
-
-	return err;
-}
-
-static int read_nor_arc_info(void)
-{
-	int i;
-
-	for (i = 0; i < MAX_FWENV_ADDR; i++)
-		if (fwenv_addr[i] != -1) {
-			memcpy(smac, (void *)fwenv_addr[i], sizeof(smac));
-			return (i + 1);
-		}
-
-	return 0;
-}
-#endif
-
-int set_arc_product(int argc, char *const argv[])
-{
-	if (argc != 5)
-		return -1;
-
-	/* Check serial number */
-	if (strlen(argv[1]) != MAX_SERIAL_SIZE)
-		return -1;
-
-	/* Check HWaddrs */
-	if (ishwaddr(argv[2]) || ishwaddr(argv[3]) || ishwaddr(argv[4]))
-		return -1;
-
-	strcpy(smac[0], argv[1]);
-	strcpy(smac[1], argv[2]);
-	strcpy(smac[2], argv[3]);
-	strcpy(smac[3], argv[4]);
-
-#if (FWENV_TYPE == FWENV_NOR_FLASH)
-	return set_nor_arc_product(argc, argv);
-#endif
-#if (FWENV_TYPE == FWENV_SPI_FLASH)
-	return set_spi_arc_product(argc, argv);
-#endif
-#if (FWENV_TYPE == FWENV_MMC)
-	return set_mmc_arc_product(argc, argv);
-#endif
-	return -2;
-}
-
-static int read_arc_info(void)
-{
-#if (FWENV_TYPE == FWENV_NOR_FLASH)
-	return read_nor_arc_info();
-#endif
-#if (FWENV_TYPE == FWENV_SPI_FLASH)
-	return read_spi_arc_info();
-#endif
-#if (FWENV_TYPE == FWENV_MMC)
-	return read_mmc_arc_info();
-#endif
-	return 0;
-}
-
-static int do_get_arc_info(void)
-{
-	int l = read_arc_info();
-	char *oldserial = env_get("SERIAL");
-	char *oldversion = env_get("VERSION");
-
-	if (oldversion != NULL)
-		if (strcmp(oldversion, U_BOOT_VERSION) != 0)
-			oldversion = NULL;
-
-	if (l == 0) {
-		printf("%s: failed to read factory info\n", __func__);
-		return -2;
-	}
-
-	printf("\rSERIAL:  ");
-	if (smac[0][0] == EMPY_CHAR) {
-		printf("<not found>\n");
-	} else {
-		printf("%s\n", smac[0]);
-		env_set("SERIAL", smac[0]);
-	}
-
-	if (strcmp(smac[1], "00:00:00:00:00:00") == 0) {
-		env_set("ethaddr", NULL);
-		env_set("eth1addr", NULL);
-		env_set("eth2addr", NULL);
-		goto done;
-	}
-
-	printf("HWADDR0: ");
-	if (smac[1][0] == EMPY_CHAR) {
-		printf("<not found>\n");
-	} else {
-		char *ret = env_get("ethaddr");
-
-		if (ret == NULL) {
-			env_set("ethaddr", smac[1]);
-			printf("%s\n", smac[1]);
-		} else if (strcmp(ret, __stringify(CONFIG_ETHADDR)) == 0) {
-			env_set("ethaddr", smac[1]);
-			printf("%s (factory)\n", smac[1]);
-		} else {
-			printf("%s\n", ret);
-		}
-	}
-
-	if (strcmp(smac[2], "00:00:00:00:00:00") == 0) {
-		env_set("eth1addr", NULL);
-		env_set("eth2addr", NULL);
-		goto done;
-	}
-
-	printf("HWADDR1: ");
-	if (smac[2][0] == EMPY_CHAR) {
-		printf("<not found>\n");
-	} else {
-		char *ret = env_get("eth1addr");
-
-		if (ret == NULL) {
-			env_set("ethaddr", smac[2]);
-			printf("%s\n", smac[2]);
-		} else if (strcmp(ret, __stringify(CONFIG_ETH1ADDR)) == 0) {
-			env_set("eth1addr", smac[2]);
-			printf("%s (factory)\n", smac[2]);
-		} else {
-			printf("%s\n", ret);
-		}
-	}
-
-	if (strcmp(smac[3], "00:00:00:00:00:00") == 0) {
-		env_set("eth2addr", NULL);
-		goto done;
-	}
-
-	printf("HWADDR2: ");
-	if (smac[3][0] == EMPY_CHAR) {
-		printf("<not found>\n");
-	} else {
-		char *ret = env_get("eth2addr");
-
-		if (ret == NULL) {
-			env_set("ethaddr", smac[3]);
-			printf("%s\n", smac[3]);
-		} else if (strcmp(ret, __stringify(CONFIG_ETH2ADDR)) == 0) {
-			env_set("eth2addr", smac[3]);
-			printf("%s (factory)\n", smac[3]);
-		} else {
-			printf("%s\n", ret);
-		}
-	}
-done:
-	if (oldserial == NULL || oldversion == NULL) {
-		if (oldversion == NULL)
-			env_set("VERSION", U_BOOT_VERSION);
-		env_save();
-	}
-
-	return 0;
-}
-
-static int init_fwenv(void)
-{
-	int i, ret = -1;
-
-	fwenv_addr[0] = FWENV_ADDR1;
-	fwenv_addr[1] = FWENV_ADDR2;
-	fwenv_addr[2] = FWENV_ADDR3;
-	fwenv_addr[3] = FWENV_ADDR4;
-
-	for (i = 0; i < MAX_FWENV_ADDR; i++)
-		if (fwenv_addr[i] != -1)
-			ret = 0;
-	if (ret)
-		printf("%s: No firmfare info storage address is defined\n",
-		       __func__);
-	return ret;
-}
-
-void get_arc_info(void)
-{
-	if (!init_fwenv())
-		do_get_arc_info();
-}
-
-static int do_arc_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
-		      char *const argv[])
-{
-	const char *cmd;
-	int ret = -1;
-
-	cmd = argv[1];
-	--argc;
-	++argv;
-
-	if (init_fwenv())
-		return ret;
-
-	if (strcmp(cmd, "product") == 0)
-		ret = set_arc_product(argc, argv);
-	else if (strcmp(cmd, "info") == 0)
-		ret = do_get_arc_info();
-
-	if (ret == -1)
-		return CMD_RET_USAGE;
-
-	return ret;
-}
-
-U_BOOT_CMD(arc, 6, 1, do_arc_cmd,
-	   "Arcturus product command sub-system",
-	   "product serial hwaddr0 hwaddr1 hwaddr2    - save Arcturus factory env\n"
-	   "info                                      - show Arcturus factory env\n\n");
diff --git a/board/Arcturus/ucp1020/ddr.c b/board/Arcturus/ucp1020/ddr.c
deleted file mode 100644
index a3285eb..0000000
--- a/board/Arcturus/ucp1020/ddr.c
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013-2015 Arcturus Networks, Inc.
- *           http://www.arcturusnetworks.com/products/ucp1020/
- * based on board/freescale/p1_p2_rdb_pc/spl.c
- * original copyright follows:
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <vsprintf.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-#include <asm/io.h>
-#include <asm/fsl_law.h>
-
-#ifdef CONFIG_SYS_DDR_RAW_TIMING
-#if defined(CONFIG_UCP1020) || defined(CONFIG_UCP1020T1)
-/*
- * Micron MT41J128M16HA-15E
- * */
-dimm_params_t ddr_raw_timing = {
-	.n_ranks = 1,
-	.rank_density = 536870912u,
-	.capacity = 536870912u,
-	.primary_sdram_width = 32,
-	.ec_sdram_width = 8,
-	.registered_dimm = 0,
-	.mirrored_dimm = 0,
-	.n_row_addr = 14,
-	.n_col_addr = 10,
-	.n_banks_per_sdram_device = 8,
-	.edc_config = 2,
-	.burst_lengths_bitmask = 0x0c,
-
-	.tckmin_x_ps = 1650,
-	.caslat_x = 0x7e << 4,	/* 5,6,7,8,9,10 */
-	.taa_ps = 14050,
-	.twr_ps = 15000,
-	.trcd_ps = 13500,
-	.trrd_ps = 75000,
-	.trp_ps = 13500,
-	.tras_ps = 40000,
-	.trc_ps = 49500,
-	.trfc_ps = 160000,
-	.twtr_ps = 75000,
-	.trtp_ps = 75000,
-	.refresh_rate_ps = 7800000,
-	.tfaw_ps = 30000,
-};
-
-#else
-#error Missing raw timing data for this board
-#endif
-
-int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
-			    unsigned int controller_number,
-			    unsigned int dimm_number)
-{
-	const char dimm_model[] = "Fixed DDR on board";
-
-	if ((controller_number == 0) && (dimm_number == 0)) {
-		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
-		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
-		memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
-	}
-
-	return 0;
-}
-#endif /* CONFIG_SYS_DDR_RAW_TIMING */
-
-#ifdef CONFIG_SYS_DDR_CS0_BNDS
-/* Fixed sdram init -- doesn't use serial presence detect. */
-phys_size_t fixed_sdram(void)
-{
-	sys_info_t sysinfo;
-	char buf[32];
-	size_t ddr_size;
-	fsl_ddr_cfg_regs_t ddr_cfg_regs = {
-		.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-		.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-		.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
-		.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
-		.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
-		.cs[1].config_2 = CONFIG_SYS_DDR_CS1_CONFIG_2,
-#endif
-		.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3,
-		.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0,
-		.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1,
-		.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2,
-		.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-		.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-		.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1,
-		.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2,
-		.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-		.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL,
-		.ddr_data_init = CONFIG_SYS_DDR_DATA_INIT,
-		.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL,
-		.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-		.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-		.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-		.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-		.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-		.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
-		.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-		.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-		.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-	};
-
-	get_sys_info(&sysinfo);
-	printf("Configuring DDR for %s MT/s data rate\n",
-	       strmhz(buf, sysinfo.freq_ddrbus));
-
-	ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-
-	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
-
-	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
-			 ddr_size, LAW_TRGT_IF_DDR_1) < 0) {
-		printf("ERROR setting Local Access Windows for DDR\n");
-		return 0;
-	};
-
-	return ddr_size;
-}
-#endif
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-			   dimm_params_t *pdimm,
-			   unsigned int ctrl_num)
-{
-	int i;
-
-	popts->clk_adjust = 6;
-	popts->cpo_override = 0x1f;
-	popts->write_data_delay = 2;
-	popts->half_strength_driver_enable = 1;
-	/* Write leveling override */
-	popts->wrlvl_en = 1;
-	popts->wrlvl_override = 1;
-	popts->wrlvl_sample = 0xf;
-	popts->wrlvl_start = 0x8;
-	popts->trwt_override = 1;
-	popts->trwt = 0;
-
-	if (pdimm->primary_sdram_width == 64)
-		popts->data_bus_width = 0;
-	else if (pdimm->primary_sdram_width == 32)
-		popts->data_bus_width = 1;
-	else
-		printf("Error in DDR bus width configuration!\n");
-
-	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-		popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
-		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
-	}
-}
diff --git a/board/Arcturus/ucp1020/law.c b/board/Arcturus/ucp1020/law.c
deleted file mode 100644
index cb53692..0000000
--- a/board/Arcturus/ucp1020/law.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013-2015 Arcturus Networks, Inc.
- *           http://www.arcturusnetworks.com/products/ucp1020/
- * based on board/freescale/p1_p2_rdb_pc/spl.c
- * original copyright follows:
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-#ifdef CONFIG_VSC7385_ENET
-	SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
-#endif
-	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC),
-#ifdef CONFIG_SYS_NAND_BASE_PHYS
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_32K, LAW_TRGT_IF_LBC),
-#endif
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/Arcturus/ucp1020/spl.c b/board/Arcturus/ucp1020/spl.c
deleted file mode 100644
index f7c4960..0000000
--- a/board/Arcturus/ucp1020/spl.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013-2015 Arcturus Networks, Inc.
- *           http://www.arcturusnetworks.com/products/ucp1020/
- * based on board/freescale/p1_p2_rdb_pc/spl.c
- * original copyright follows:
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <console.h>
-#include <env.h>
-#include <env_internal.h>
-#include <init.h>
-#include <ns16550.h>
-#include <malloc.h>
-#include <mmc.h>
-#include <nand.h>
-#include <i2c.h>
-#include <fsl_esdhc.h>
-#include <spi_flash.h>
-#include <asm/global_data.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static const u32 sysclk_tbl[] = {
-	66666000, 7499900, 83332500, 8999900,
-	99999000, 11111000, 12499800, 13333200
-};
-
-phys_size_t get_effective_memsize(void)
-{
-	return CONFIG_SYS_L2_SIZE;
-}
-
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio, bus_clk;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-	console_init_f();
-
-	/* Set pmuxcr to allow both i2c1 and i2c2 */
-	setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000);
-	setbits_be32(&gur->pmuxcr,
-		     in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
-
-	/* Read back the register to synchronize the write. */
-	in_be32(&gur->pmuxcr);
-
-#ifdef CONFIG_SPL_SPI_BOOT
-	clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
-#endif
-
-	/* initialize selected port with appropriate baud rate */
-	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-	plat_ratio >>= 1;
-	bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
-	gd->bus_clk = bus_clk;
-
-	ns16550_init((struct ns16550 *)CONFIG_SYS_NS16550_COM1,
-		     bus_clk / 16 / CONFIG_BAUDRATE);
-#ifdef CONFIG_SPL_MMC_BOOT
-	puts("\nSD boot...\n");
-#elif defined(CONFIG_SPL_SPI_BOOT)
-	puts("\nSPI Flash boot...\n");
-#endif
-
-	/* copy code to RAM and jump to it - this should not return */
-	/* NOTE - code has to be copied out of NAND buffer before
-	 * other blocks can be read.
-	 */
-	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *)CONFIG_SPL_GD_ADDR;
-	struct bd_info *bd;
-
-	memset(gd, 0, sizeof(gd_t));
-	bd = (struct bd_info *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
-	memset(bd, 0, sizeof(struct bd_info));
-	gd->bd = bd;
-
-	arch_cpu_init();
-	get_clocks();
-	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
-			CONFIG_SPL_RELOC_MALLOC_SIZE);
-
-#ifndef CONFIG_SPL_NAND_BOOT
-	env_init();
-#endif
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_initialize(bd);
-#endif
-	/* relocate environment function pointers etc. */
-#ifdef CONFIG_SPL_NAND_BOOT
-	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			    (uchar *)CONFIG_ENV_ADDR);
-	gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
-	gd->env_valid = ENV_VALID;
-#else
-	env_relocate();
-#endif
-
-#ifdef CONFIG_SYS_I2C_LEGACY
-	i2c_init_all();
-#else
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-
-	dram_init();
-#ifdef CONFIG_SPL_NAND_BOOT
-	puts("Tertiary program loader running in sram...");
-#else
-	puts("Second program loader running in sram...\n");
-#endif
-
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_boot();
-#elif defined(CONFIG_SPL_NAND_BOOT)
-	nand_boot();
-#endif
-}
diff --git a/board/Arcturus/ucp1020/spl_minimal.c b/board/Arcturus/ucp1020/spl_minimal.c
deleted file mode 100644
index 90abec9..0000000
--- a/board/Arcturus/ucp1020/spl_minimal.c
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013-2015 Arcturus Networks, Inc.
- *           http://www.arcturusnetworks.com/products/ucp1020/
- * based on board/freescale/p1_p2_rdb_pc/spl_minimal.c
- * original copyright follows:
- * Copyright 2011 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <init.h>
-#include <ns16550.h>
-#include <asm/io.h>
-#include <nand.h>
-#include <linux/compiler.h>
-#include <asm/fsl_law.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/global_data.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
-	set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
-	set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
-#endif
-
-	/* initialize selected port with appropriate baud rate */
-	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-	plat_ratio >>= 1;
-	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
-
-	ns16550_init((struct ns16550 *)CONFIG_SYS_NS16550_COM1,
-		     gd->bus_clk / 16 / CONFIG_BAUDRATE);
-
-	puts("\nNAND boot... ");
-
-	/* copy code to RAM and jump to it - this should not return */
-	/* NOTE - code has to be copied out of NAND buffer before
-	 * other blocks can be read.
-	 */
-	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	puts("\nSecond program loader running in sram...");
-	nand_boot();
-}
-
-void putc(char c)
-{
-	if (c == '\n')
-		ns16550_putc((struct ns16550 *)CONFIG_SYS_NS16550_COM1, '\r');
-
-	ns16550_putc((struct ns16550 *)CONFIG_SYS_NS16550_COM1, c);
-}
-
-void puts(const char *str)
-{
-	while (*str)
-		putc(*str++);
-}
diff --git a/board/Arcturus/ucp1020/tlb.c b/board/Arcturus/ucp1020/tlb.c
deleted file mode 100644
index 2c07df6..0000000
--- a/board/Arcturus/ucp1020/tlb.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013-2015 Arcturus Networks, Inc
- *           http://www.arcturusnetworks.com/products/ucp1020/
- * based on board/freescale/p1_p2_rdb_pc/tlb.c
- * original copyright follows:
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
-		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
-		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
-		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
-		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/* *I*** - Covers boot page */
-	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I,
-		      0, 0, BOOKE_PAGESZ_4K, 1),
-
-	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		      0, 1, BOOKE_PAGESZ_1M, 1),
-
-#ifndef CONFIG_SPL_BUILD
-	/* W**G* - Flash/promjet, localbus */
-	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-		      MAS3_SX | MAS3_SR, MAS2_W | MAS2_G,
-		      0, 2, BOOKE_PAGESZ_64M, 1),
-
-#ifdef CONFIG_PCI
-	/* *I*G* - PCI memory 1.5G */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
-		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		      0, 3, BOOKE_PAGESZ_1G, 1),
-
-	/* *I*G* - PCI I/O effective: 192K  */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
-		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		      0, 4, BOOKE_PAGESZ_256K, 1),
-#endif
-
-#ifdef CONFIG_VSC7385_ENET
-	/* *I*G - VSC7385 Switch */
-	SET_TLB_ENTRY(1, CONFIG_SYS_VSC7385_BASE, CONFIG_SYS_VSC7385_BASE_PHYS,
-		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		      0, 5, BOOKE_PAGESZ_1M, 1),
-#endif
-#endif /* not SPL */
-
-#ifdef CONFIG_SYS_NAND_BASE
-	/* *I*G - NAND */
-	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		      0, 7, BOOKE_PAGESZ_1M, 1),
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT) || \
-	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
-	/* *I*G - eSDHC/eSPI/NAND boot */
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_M,
-		      0, 8, BOOKE_PAGESZ_1G, 1),
-
-#endif /* RAMBOOT/SPL */
-
-#ifdef CONFIG_SYS_INIT_L2_ADDR
-	/* *I*G - L2SRAM */
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
-		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_G,
-		      0, 11, BOOKE_PAGESZ_256K, 1),
-#if CONFIG_SYS_L2_SIZE >= (256 << 10)
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
-		      CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
-		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		      0, 12, BOOKE_PAGESZ_256K, 1)
-#endif
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/Arcturus/ucp1020/ucp1020.c b/board/Arcturus/ucp1020/ucp1020.c
deleted file mode 100644
index ee8a9e0..0000000
--- a/board/Arcturus/ucp1020/ucp1020.c
+++ /dev/null
@@ -1,372 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013-2019 Arcturus Networks, Inc.
- *           https://www.arcturusnetworks.com/products/ucp1020/
- *           by Oleksandr G Zhadan et al.
- * based on board/freescale/p1_p2_rdb_pc/spl.c
- * original copyright follows:
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <hwconfig.h>
-#include <image.h>
-#include <init.h>
-#include <net.h>
-#include <pci.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <ioports.h>
-#include <netdev.h>
-#include <micrel.h>
-#include <spi_flash.h>
-#include <mmc.h>
-#include <linux/ctype.h>
-#include <asm/fsl_serdes.h>
-#include <asm/gpio.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/io.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_lbc.h>
-#include <asm/mp.h>
-#include "ucp1020.h"
-
-void spi_set_speed(struct spi_slave *slave, uint hz)
-{
-	/* TO DO: It's actially have to be in spi/ */
-}
-
-/*
- * To be compatible with cmd_gpio
- */
-int name_to_gpio(const char *name)
-{
-	int gpio = 31 - dectoul(name, NULL);
-
-	if (gpio < 16)
-		gpio = -1;
-
-	return gpio;
-}
-
-void board_gpio_init(void)
-{
-	int i;
-	char envname[8], *val;
-
-	for (i = 0; i < GPIO_MAX_NUM; i++) {
-		sprintf(envname, "GPIO%d", i);
-		val = env_get(envname);
-		if (val) {
-			char direction = toupper(val[0]);
-			char level = toupper(val[1]);
-
-			if (direction == 'I') {
-				gpio_direction_input(i);
-			} else {
-				if (direction == 'O') {
-					if (level == '1')
-						gpio_direction_output(i, 1);
-					else
-						gpio_direction_output(i, 0);
-				}
-			}
-		}
-	}
-
-	val = env_get("PCIE_OFF");
-	if (val) {
-		gpio_direction_input(GPIO_PCIE1_EN);
-		gpio_direction_input(GPIO_PCIE2_EN);
-	} else {
-		gpio_direction_output(GPIO_PCIE1_EN, 1);
-		gpio_direction_output(GPIO_PCIE2_EN, 1);
-	}
-
-	val = env_get("SDHC_CDWP_OFF");
-	if (!val) {
-		ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-		setbits_be32(&gur->pmuxcr,
-			     (MPC85xx_PMUXCR_SDHC_CD | MPC85xx_PMUXCR_SDHC_WP));
-	}
-}
-
-int board_early_init_f(void)
-{
-	return 0;	/* Just in case. Could be disable in config file */
-}
-
-int checkboard(void)
-{
-	printf("Board: %s\n", CONFIG_BOARDNAME_LOCAL);
-	board_gpio_init();
-#ifdef CONFIG_MMC
-	printf("SD/MMC: 4-bit Mode\n");
-#endif
-
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-#endif
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	/* invalidate existing TLB entry for flash */
-	disable_tlb(flash_esel);
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
-		MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, /* perms, wimge */
-		0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */
-
-	return 0;
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
-#if defined(CONFIG_PHY_MICREL_KSZ9021)
-	int regval;
-	static int cnt;
-
-	if (cnt++ == 0)
-		printf("PHYs address [");
-
-	if (phydev->addr == TSEC1_PHY_ADDR || phydev->addr == TSEC3_PHY_ADDR) {
-		regval =
-		    ksz9021_phy_extended_read(phydev,
-					      MII_KSZ9021_EXT_STRAP_STATUS);
-		/*
-		 * min rx data delay
-		 */
-		ksz9021_phy_extended_write(phydev,
-					   MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
-					   0x6666);
-		/*
-		 * max rx/tx clock delay, min rx/tx control
-		 */
-		ksz9021_phy_extended_write(phydev,
-					   MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
-					   0xf6f6);
-		printf("0x%x", (regval & 0x1f));
-	} else {
-		printf("0x%x", (TSEC2_PHY_ADDR & 0x1f));
-	}
-	if (cnt == 3)
-		printf("] ");
-	else
-		printf(",");
-#endif
-
-#if defined(CONFIG_PHY_MICREL_KSZ9031_DEBUG)
-	regval = ksz9031_phy_extended_read(phydev, 2, 0x01, 0x4000);
-	if (regval >= 0)
-		printf(" (ADDR 0x%x) ", regval & 0x1f);
-#endif
-
-	return 0;
-}
-
-int last_stage_init(void)
-{
-	static char newkernelargs[256];
-	static u8 id1[16];
-	static u8 id2;
-#ifdef CONFIG_MMC
-	struct mmc *mmc;
-#endif
-	char *sval, *kval;
-
-	if (i2c_read(CONFIG_SYS_I2C_IDT6V49205B, 7, 1, &id1[0], 2) < 0) {
-		printf("Error reading i2c IDT6V49205B information!\n");
-	} else {
-		printf("IDT6V49205B(0x%02x): ready\n", id1[1]);
-		i2c_read(CONFIG_SYS_I2C_IDT6V49205B, 4, 1, &id1[0], 2);
-		if (!(id1[1] & 0x02)) {
-			id1[1] |= 0x02;
-			i2c_write(CONFIG_SYS_I2C_IDT6V49205B, 4, 1, &id1[0], 2);
-			asm("nop; nop");
-		}
-	}
-
-	if (i2c_read(CONFIG_SYS_I2C_NCT72_ADDR, 0xFE, 1, &id2, 1) < 0)
-		printf("Error reading i2c NCT72 information!\n");
-	else
-		printf("NCT72(0x%x): ready\n", id2);
-
-	kval = env_get("kernelargs");
-
-#ifdef CONFIG_MMC
-	mmc = find_mmc_device(0);
-	if (mmc)
-		if (!mmc_init(mmc)) {
-			printf("MMC/SD card detected\n");
-			if (kval) {
-				int n = strlen(defkargs);
-				char *tmp = strstr(kval, defkargs);
-
-				*tmp = 0;
-				strcpy(newkernelargs, kval);
-				strcat(newkernelargs, " ");
-				strcat(newkernelargs, mmckargs);
-				strcat(newkernelargs, " ");
-				strcat(newkernelargs, &tmp[n]);
-				env_set("kernelargs", newkernelargs);
-			} else {
-				env_set("kernelargs", mmckargs);
-			}
-		}
-#endif
-	get_arc_info();
-
-	if (kval) {
-		sval = env_get("SERIAL");
-		if (sval) {
-			strcpy(newkernelargs, "SN=");
-			strcat(newkernelargs, sval);
-			strcat(newkernelargs, " ");
-			strcat(newkernelargs, kval);
-			env_set("kernelargs", newkernelargs);
-		}
-	} else {
-		printf("Error reading kernelargs env variable!\n");
-	}
-
-	return 0;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
-	struct fsl_pq_mdio_info mdio_info;
-	struct tsec_info_struct tsec_info[4];
-#ifdef CONFIG_TSEC2
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#endif
-	int num = 0;
-
-#ifdef CONFIG_TSEC1
-	SET_STD_TSEC_INFO(tsec_info[num], 1);
-	num++;
-#endif
-#ifdef CONFIG_TSEC2
-	SET_STD_TSEC_INFO(tsec_info[num], 2);
-	if (is_serdes_configured(SGMII_TSEC2)) {
-		if (!(in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_SGMII2_DIS)) {
-			puts("eTSEC2 is in sgmii mode.\n");
-			tsec_info[num].flags |= TSEC_SGMII;
-			tsec_info[num].phyaddr = TSEC2_PHY_ADDR_SGMII;
-		}
-	}
-	num++;
-#endif
-#ifdef CONFIG_TSEC3
-	SET_STD_TSEC_INFO(tsec_info[num], 3);
-	num++;
-#endif
-
-	if (!num) {
-		printf("No TSECs initialized\n");
-		return 0;
-	}
-
-	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-	mdio_info.name = DEFAULT_MII_NAME;
-
-	fsl_pq_mdio_init(bis, &mdio_info);
-
-	tsec_eth_init(bis, tsec_info, num);
-
-	return pci_eth_init(bis);
-}
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-	const char *soc_usb_compat = "fsl-usb2-dr";
-	int err, usb1_off, usb2_off;
-
-	ft_cpu_setup(blob, bd);
-
-	base = env_get_bootm_low();
-	size = env_get_bootm_size();
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-	FT_FSL_PCI_SETUP;
-
-#if defined(CONFIG_HAS_FSL_DR_USB)
-	fsl_fdt_fixup_dr_usb(blob, bd);
-#endif
-
-#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
-	/* Delete eLBC node as it is muxed with USB2 controller */
-	if (hwconfig("usb2")) {
-		const char *soc_elbc_compat = "fsl,p1020-elbc";
-		int off = fdt_node_offset_by_compatible(blob, -1,
-							soc_elbc_compat);
-		if (off < 0) {
-			printf
-			    ("WARNING: could not find compatible node %s: %s\n",
-			     soc_elbc_compat, fdt_strerror(off));
-			return off;
-		}
-		err = fdt_del_node(blob, off);
-		if (err < 0) {
-			printf("WARNING: could not remove %s: %s\n",
-			       soc_elbc_compat, fdt_strerror(err));
-		}
-		return err;
-	}
-#endif
-
-/* Delete USB2 node as it is muxed with eLBC */
-	usb1_off = fdt_node_offset_by_compatible(blob, -1, soc_usb_compat);
-	if (usb1_off < 0) {
-		printf("WARNING: could not find compatible node %s: %s.\n",
-		       soc_usb_compat, fdt_strerror(usb1_off));
-		return usb1_off;
-	}
-	usb2_off =
-	    fdt_node_offset_by_compatible(blob, usb1_off, soc_usb_compat);
-	if (usb2_off < 0) {
-		printf("WARNING: could not find compatible node %s: %s.\n",
-		       soc_usb_compat, fdt_strerror(usb2_off));
-		return usb2_off;
-	}
-	err = fdt_del_node(blob, usb2_off);
-	if (err < 0) {
-		printf("WARNING: could not remove %s: %s.\n",
-		       soc_usb_compat, fdt_strerror(err));
-	}
-	return 0;
-}
-#endif
diff --git a/board/Arcturus/ucp1020/ucp1020.h b/board/Arcturus/ucp1020/ucp1020.h
deleted file mode 100644
index 1b527cd..0000000
--- a/board/Arcturus/ucp1020/ucp1020.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013-2019 Arcturus Networks, Inc.
- *           https://www.arcturusnetworks.com/products/ucp1020/
- *           by Oleksandr G Zhadan et al.
- */
-
-#ifndef __UCP1020_H__
-#define __UCP1020_H__
-
-#define GPIO0		31
-#define GPIO1		30
-#define GPIO2		29
-#define GPIO3		28
-#define GPIO4		27
-#define GPIO5		26
-#define GPIO6		25
-#define GPIO7		24
-#define GPIO8		23
-#define GPIO9		22
-#define GPIO10		21
-#define GPIO11		20
-#define GPIO12		19
-#define GPIO13		18
-#define GPIO14		17
-#define GPIO15		16
-#define GPIO_MAX_NUM	16
-
-#define GPIO_SDHC_CD	GPIO8
-#define GPIO_SDHC_WP	GPIO9
-#define GPIO_USB_PCTL0	GPIO10
-#define GPIO_PCIE1_EN	GPIO11
-#define GPIO_PCIE2_EN	GPIO10
-#define GPIO_USB_PCTL1	GPIO11
-
-#define GPIO_WD		GPIO15
-
-#ifdef CONFIG_MMC
-static char *defkargs = "root=/dev/mtdblock1 rootfstype=cramfs ro";
-static char *mmckargs = "root=/dev/mmcblk0p1 rootwait rw";
-#endif
-
-int get_arc_info(void);
-
-#endif
diff --git a/board/emulation/qemu-riscv/Kconfig b/board/emulation/qemu-riscv/Kconfig
index a7de82d..1bbf1bc 100644
--- a/board/emulation/qemu-riscv/Kconfig
+++ b/board/emulation/qemu-riscv/Kconfig
@@ -51,7 +51,6 @@
 	imply E1000
 	imply NVME
 	imply PCI
-	imply DM_PCI
 	imply PCIE_ECAM_GENERIC
 	imply SCSI
 	imply DM_SCSI
diff --git a/board/socionext/developerbox/Kconfig b/board/socionext/developerbox/Kconfig
index 706b8dc..c181d26 100644
--- a/board/socionext/developerbox/Kconfig
+++ b/board/socionext/developerbox/Kconfig
@@ -7,7 +7,6 @@
 config TARGET_DEVELOPERBOX
 	bool "Socionext DeveloperBox"
 	select PCI
-	select DM_PCI
 	select PCIE_ECAM_SYNQUACER
 	select SYS_DISABLE_DCACHE_OPS
 	select OF_BOARD_SETUP
diff --git a/common/Kconfig b/common/Kconfig
index 2ab20a6..ee14d3a 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -551,7 +551,6 @@
 config PCI_INIT_R
 	bool "Enumerate PCI buses during init"
 	depends on PCI
-	default y if !DM_PCI
 	help
 	  With this option U-Boot will call pci_init() soon after relocation,
 	  which will enumerate PCI buses. This is needed, for instance, in the
diff --git a/configs/UCP1020_defconfig b/configs/UCP1020_defconfig
deleted file mode 100644
index 1fdb195..0000000
--- a/configs/UCP1020_defconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF80000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_UCP1020=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc>\" to stop\n"
-CONFIG_AUTOBOOT_STOP_STR="\x1b"
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_LAST_STAGE_INIT=y
-# CONFIG_MISC_INIT_R is not set
-CONFIG_HUSH_PARSER=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="B$ "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_PCI is not set
-# CONFIG_CMD_SATA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_CRAMFS=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEC0C0000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_FS_CRAMFS=y
-CONFIG_OF_LIBFDT=y
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index d4047c0..2062197 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -170,13 +170,8 @@
 static int ahci_host_init(struct ahci_uc_priv *uc_priv)
 {
 #if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
-# ifdef CONFIG_DM_PCI
 	struct udevice *dev = uc_priv->dev;
 	struct pci_child_plat *pplat = dev_get_parent_plat(dev);
-# else
-	pci_dev_t pdev = uc_priv->dev;
-	unsigned short vendor;
-# endif
 	u16 tmp16;
 #endif
 	void __iomem *mmio = uc_priv->mmio_base;
@@ -200,23 +195,12 @@
 	writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
 
 #if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
-# ifdef CONFIG_DM_PCI
 	if (pplat->vendor == PCI_VENDOR_ID_INTEL) {
 		u16 tmp16;
 
 		dm_pci_read_config16(dev, 0x92, &tmp16);
 		dm_pci_write_config16(dev, 0x92, tmp16 | 0xf);
 	}
-# else
-	pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
-
-	if (vendor == PCI_VENDOR_ID_INTEL) {
-		u16 tmp16;
-		pci_read_config_word(pdev, 0x92, &tmp16);
-		tmp16 |= 0xf;
-		pci_write_config_word(pdev, 0x92, tmp16);
-	}
-# endif
 #endif
 	uc_priv->cap = readl(mmio + HOST_CAP);
 	uc_priv->port_map = readl(mmio + HOST_PORTS_IMPL);
@@ -331,15 +315,9 @@
 	debug("HOST_CTL 0x%x\n", tmp);
 #if !defined(CONFIG_DM_SCSI)
 #ifndef CONFIG_SCSI_AHCI_PLAT
-# ifdef CONFIG_DM_PCI
 	dm_pci_read_config16(dev, PCI_COMMAND, &tmp16);
 	tmp |= PCI_COMMAND_MASTER;
 	dm_pci_write_config16(dev, PCI_COMMAND, tmp16);
-# else
-	pci_read_config_word(pdev, PCI_COMMAND, &tmp16);
-	tmp |= PCI_COMMAND_MASTER;
-	pci_write_config_word(pdev, PCI_COMMAND, tmp16);
-# endif
 #endif
 #endif
 	return 0;
@@ -349,11 +327,7 @@
 static void ahci_print_info(struct ahci_uc_priv *uc_priv)
 {
 #if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
-# if defined(CONFIG_DM_PCI)
 	struct udevice *dev = uc_priv->dev;
-# else
-	pci_dev_t pdev = uc_priv->dev;
-# endif
 	u16 cc;
 #endif
 	void __iomem *mmio = uc_priv->mmio_base;
@@ -379,11 +353,7 @@
 #if defined(CONFIG_SCSI_AHCI_PLAT) || defined(CONFIG_DM_SCSI)
 	scc_s = "SATA";
 #else
-# ifdef CONFIG_DM_PCI
 	dm_pci_read_config16(dev, 0x0a, &cc);
-# else
-	pci_read_config_word(pdev, 0x0a, &cc);
-# endif
 	if (cc == 0x0101)
 		scc_s = "IDE";
 	else if (cc == 0x0106)
@@ -428,11 +398,7 @@
 }
 
 #if defined(CONFIG_DM_SCSI) || !defined(CONFIG_SCSI_AHCI_PLAT)
-# if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
 static int ahci_init_one(struct ahci_uc_priv *uc_priv, struct udevice *dev)
-# else
-static int ahci_init_one(struct ahci_uc_priv *uc_priv, pci_dev_t dev)
-# endif
 {
 #if !defined(CONFIG_DM_SCSI)
 	u16 vendor;
@@ -450,7 +416,6 @@
 	uc_priv->udma_mask = 0x7f;	/*Fixme,assume to support UDMA6 */
 
 #if !defined(CONFIG_DM_SCSI)
-#ifdef CONFIG_DM_PCI
 	uc_priv->mmio_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_5,
 					      PCI_REGION_MEM);
 
@@ -462,18 +427,6 @@
 	if (vendor == 0x197b)
 		dm_pci_write_config8(dev, 0x41, 0xa1);
 #else
-	uc_priv->mmio_base = pci_map_bar(dev, PCI_BASE_ADDRESS_5,
-					   PCI_REGION_MEM);
-
-	/* Take from kernel:
-	 * JMicron-specific fixup:
-	 * make sure we're in AHCI mode
-	 */
-	pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
-	if (vendor == 0x197b)
-		pci_write_config_byte(dev, 0x41, 0xa1);
-#endif
-#else
 	struct scsi_plat *plat = dev_get_uclass_plat(dev);
 	uc_priv->mmio_base = (void *)plat->base;
 #endif
@@ -1006,7 +959,6 @@
 		return;
 	}
 	uc_priv = probe_ent;
-# if defined(CONFIG_DM_PCI)
 	struct udevice *dev;
 	int ret;
 
@@ -1014,9 +966,6 @@
 	if (ret)
 		return;
 	ahci_init_one(uc_priv, dev);
-# else
-	ahci_init_one(uc_priv, busdevfunc);
-# endif
 #else
 	uc_priv = probe_ent;
 #endif
@@ -1026,7 +975,6 @@
 #endif
 
 #ifndef CONFIG_SCSI_AHCI_PLAT
-# if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
 int ahci_init_one_dm(struct udevice *dev)
 {
 	struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev);
@@ -1034,7 +982,6 @@
 	return ahci_init_one(uc_priv, dev);
 }
 #endif
-#endif
 
 int ahci_start_ports_dm(struct udevice *dev)
 {
@@ -1196,7 +1143,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_DM_PCI
 int ahci_probe_scsi_pci(struct udevice *ahci_dev)
 {
 	ulong base;
@@ -1221,7 +1167,6 @@
 						 PCI_REGION_MEM);
 	return ahci_probe_scsi(ahci_dev, base);
 }
-#endif
 
 struct scsi_ops scsi_ops = {
 	.exec		= ahci_scsi_exec,
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 4a89c1a..e37ac9f 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -358,7 +358,7 @@
 
 config OCTEON_GPIO
 	bool "Octeon II/III/TX/TX2 GPIO driver"
-	depends on DM_GPIO && DM_PCI &&	(ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
+	depends on DM_GPIO && PCI && (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
 	default y
 	help
 	  Add support for the Marvell Octeon GPIO driver. This is used with
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index c2eb24e..c16ebb2 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -18,7 +18,7 @@
 obj-$(CONFIG_SYS_I2C_CA) += i2c-cortina.o
 obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o
 obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o
-ifdef CONFIG_DM_PCI
+ifdef CONFIG_PCI
 obj-$(CONFIG_SYS_I2C_DW) += designware_i2c_pci.o
 endif
 obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 32f2708..d4dc720 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -222,7 +222,6 @@
 
 config E1000
 	bool "Intel PRO/1000 Gigabit Ethernet support"
-	depends on (DM_ETH && DM_PCI) || !DM_ETH
 	help
 	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
 	  adapters.  For more information on how to identify your adapter, go
@@ -506,7 +505,7 @@
 
 config PCH_GBE
 	bool "Intel Platform Controller Hub EG20T GMAC driver"
-	depends on DM_ETH && DM_PCI
+	depends on DM_ETH
 	select PHYLIB
 	help
 	  This MAC is present in Intel Platform Controller Hub EG20T. It
@@ -606,7 +605,6 @@
 
 config TULIP
 	bool "DEC Tulip DC2114x Ethernet support"
-	depends on (DM_ETH && DM_PCI) || !DM_ETH
 	help
 	  This driver supports DEC DC2114x Fast ethernet chips.
 
@@ -791,7 +789,7 @@
 
 config FSL_ENETC
 	bool "NXP ENETC Ethernet controller"
-	depends on DM_PCI && DM_ETH && DM_MDIO
+	depends on DM_ETH && DM_MDIO
 	help
 	  This driver supports the NXP ENETC Ethernet controller found on some
 	  of the NXP SoCs.
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 5d92257..5aaac60 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -756,16 +756,16 @@
 
 static int designware_eth_bind(struct udevice *dev)
 {
-#ifdef CONFIG_DM_PCI
-	static int num_cards;
-	char name[20];
+	if (IS_ENABLED(CONFIG_PCI)) {
+		static int num_cards;
+		char name[20];
 
-	/* Create a unique device name for PCI type devices */
-	if (device_is_on_pci_bus(dev)) {
-		sprintf(name, "eth_designware#%u", num_cards++);
-		device_set_name(dev, name);
+		/* Create a unique device name for PCI type devices */
+		if (device_is_on_pci_bus(dev)) {
+			sprintf(name, "eth_designware#%u", num_cards++);
+			device_set_name(dev, name);
+		}
 	}
-#endif
 
 	return 0;
 }
@@ -831,12 +831,11 @@
 	else
 		reset_deassert_bulk(&reset_bulk);
 
-#ifdef CONFIG_DM_PCI
 	/*
 	 * If we are on PCI bus, either directly attached to a PCI root port,
 	 * or via a PCI bridge, fill in plat before we probe the hardware.
 	 */
-	if (device_is_on_pci_bus(dev)) {
+	if (IS_ENABLED(CONFIG_PCI) && device_is_on_pci_bus(dev)) {
 		dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0, &iobase);
 		iobase &= PCI_BASE_ADDRESS_MEM_MASK;
 		iobase = dm_pci_mem_to_phys(dev, iobase);
@@ -844,7 +843,6 @@
 		pdata->iobase = iobase;
 		pdata->phy_interface = PHY_INTERFACE_MODE_RMII;
 	}
-#endif
 
 	debug("%s, iobase=%x, priv=%p\n", __func__, iobase, priv);
 	ioaddr = iobase;
diff --git a/drivers/net/mscc_eswitch/Kconfig b/drivers/net/mscc_eswitch/Kconfig
index ccf7822..930d2ef 100644
--- a/drivers/net/mscc_eswitch/Kconfig
+++ b/drivers/net/mscc_eswitch/Kconfig
@@ -39,7 +39,7 @@
 
 config MSCC_FELIX_SWITCH
 	bool "Felix switch driver"
-	depends on DM_DSA && DM_PCI
+	depends on DM_DSA
 	select FSL_ENETC
 	help
 	  This driver supports the Ethernet switch integrated in the
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 2ef4d46..e4123ba 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -2,35 +2,26 @@
 	bool "PCI support"
 	depends on DM
 	default y if PPC
-	select DM_PCI
 	help
 	  Enable support for PCI (Peripheral Interconnect Bus), a type of bus
 	  used on some devices to allow the CPU to communicate with its
 	  peripherals.
 
-config DM_PCI
-	bool
-	help
-	  Use driver model for PCI. Driver model is the new method for
-	  orgnising devices in U-Boot. For PCI, driver model keeps track of
-	  available PCI devices, allows scanning of PCI buses and provides
-	  device configuration support.
+	  This subsystem requires driver model.
 
 if PCI
 
 config DM_PCI_COMPAT
 	bool "Enable compatible functions for PCI"
-	depends on DM_PCI
 	help
 	  Enable compatibility functions for PCI so that old code can be used
-	  with CONFIG_DM_PCI enabled. This should be used as an interim
+	  with CONFIG_PCI enabled. This should be used as an interim
 	  measure when porting a board to use driver model for PCI. Once the
 	  board is fully supported, this option should be disabled.
 
 config PCI_AARDVARK
 	bool "Enable Aardvark PCIe driver"
 	default n
-	depends on DM_PCI
 	depends on DM_GPIO
 	depends on ARMADA_3700
 	help
@@ -40,14 +31,12 @@
 
 config PCI_PNP
 	bool "Enable Plug & Play support for PCI"
-	depends on PCI || DM_PCI
 	default y
 	help
 	  Enable PCI memory and I/O space resource allocation and assignment.
 
 config PCI_REGION_MULTI_ENTRY
 	bool "Enable Multiple entries of region type MEMORY in ranges for PCI"
-	depends on PCI || DM_PCI
 	default n
 	help
 	  Enable PCI memory regions to be of multiple entry. Multiple entry
@@ -57,7 +46,6 @@
 
 config PCI_MAP_SYSTEM_MEMORY
 	bool "Map local system memory from a virtual base address"
-	depends on PCI || DM_PCI
 	depends on MIPS
 	default n
 	help
@@ -70,7 +58,6 @@
 
 config PCI_SRIOV
 	bool "Enable Single Root I/O Virtualization support for PCI"
-	depends on PCI || DM_PCI
 	default n
 	help
 	  Say Y here if you want to enable PCI Single Root I/O Virtualization
@@ -80,7 +67,6 @@
 
 config PCI_ARID
         bool "Enable Alternate Routing-ID support for PCI"
-        depends on PCI || DM_PCI
         default n
         help
           Say Y here if you want to enable Alternate Routing-ID capability
@@ -90,7 +76,6 @@
 config PCIE_ECAM_GENERIC
 	bool "Generic ECAM-based PCI host controller support"
 	default n
-	depends on DM_PCI
 	help
 	  Say Y here if you want to enable support for generic ECAM-based
 	  PCIe host controllers, such as the one emulated by QEMU.
@@ -98,7 +83,6 @@
 config PCIE_ECAM_SYNQUACER
 	bool "SynQuacer ECAM-based PCI host controller support"
 	default n
-	depends on DM_PCI
 	select PCI_INIT_R
 	select PCI_REGION_MULTI_ENTRY
 	help
@@ -109,14 +93,12 @@
 
 config PCI_PHYTIUM
 	bool "Phytium PCIe support"
-	depends on DM_PCI
 	help
 	  Say Y here if you want to enable PCIe controller support on
 	  Phytium SoCs.
 
 config PCIE_DW_MVEBU
 	bool "Enable Armada-8K PCIe driver (DesignWare core)"
-	depends on DM_PCI
 	depends on ARMADA_8K
 	help
 	  Say Y here if you want to enable PCIe controller support on
@@ -135,7 +117,6 @@
 
 config PCIE_FSL
 	bool "FSL PowerPC PCIe support"
-	depends on DM_PCI
 	help
 	  Say Y here if you want to enable PCIe controller support on FSL
 	  PowerPC MPC85xx, MPC86xx, B series, P series and T series SoCs.
@@ -143,14 +124,12 @@
 
 config PCI_MPC85XX
 	bool "MPC85XX PowerPC PCI support"
-	depends on DM_PCI
 	help
 	  Say Y here if you want to enable PCI controller support on FSL
 	  PowerPC MPC85xx SoC.
 
 config PCI_RCAR_GEN2
 	bool "Renesas RCar Gen2 PCIe driver"
-	depends on DM_PCI
 	depends on RCAR_32
 	help
 	  Say Y here if you want to enable PCIe controller support on
@@ -159,7 +138,6 @@
 
 config PCI_RCAR_GEN3
 	bool "Renesas RCar Gen3 PCIe driver"
-	depends on DM_PCI
 	depends on RCAR_GEN3
 	help
 	  Say Y here if you want to enable PCIe controller support on
@@ -167,7 +145,7 @@
 
 config PCI_SANDBOX
 	bool "Sandbox PCI support"
-	depends on SANDBOX && DM_PCI
+	depends on SANDBOX
 	help
 	  Support PCI on sandbox, as an emulated bus. This permits testing of
 	  PCI feature such as bus scanning, device configuration and device
@@ -202,7 +180,6 @@
 
 config PCI_XILINX
 	bool "Xilinx AXI Bridge for PCI Express"
-	depends on DM_PCI
 	help
 	  Enable support for the Xilinx AXI bridge for PCI express, an IP block
 	  which can be used on some generations of Xilinx FPGAs.
@@ -213,7 +190,6 @@
 
 config PCIE_LAYERSCAPE_RC
 	bool "Layerscape PCIe Root Complex mode support"
-	depends on DM_PCI
 	select PCIE_LAYERSCAPE
 	help
 	  Enable Layerscape PCIe Root Complex mode driver support. The Layerscape
@@ -235,7 +211,6 @@
 
 config PCIE_LAYERSCAPE_EP
 	bool "Layerscape PCIe Endpoint mode support"
-	depends on DM_PCI
 	select PCIE_LAYERSCAPE
 	select PCI_ENDPOINT
 	help
@@ -246,7 +221,6 @@
 
 config PCIE_LAYERSCAPE_GEN4
 	bool "Layerscape Gen4 PCIe support"
-	depends on DM_PCI
 	help
 	  Support PCIe Gen4 on NXP Layerscape SoCs, which may have one or
 	  several PCIe controllers. The PCIe controller can work in RC or
@@ -279,14 +253,12 @@
 
 config PCIE_INTEL_FPGA
 	bool "Intel FPGA PCIe support"
-	depends on DM_PCI
 	help
 	  Say Y here if you want to enable PCIe controller support on Intel
 	  FPGA, example Stratix 10.
 
 config PCIE_IPROC
 	bool "Iproc PCIe support"
-	depends on DM_PCI
 	help
 	  Broadcom iProc PCIe controller driver.
 	  Say Y here if you want to enable Broadcom iProc PCIe controller,
@@ -294,7 +266,6 @@
 config PCI_MVEBU
 	bool "Enable Armada XP/38x PCIe driver"
 	depends on ARCH_MVEBU
-	select DM_PCI
 	select MISC
 	help
 	  Say Y here if you want to enable PCIe controller support on
@@ -302,7 +273,6 @@
 
 config PCIE_DW_COMMON
 	bool
-	select DM_PCI
 
 config PCI_KEYSTONE
 	bool "TI Keystone PCIe controller"
@@ -312,7 +282,6 @@
 
 config PCIE_MEDIATEK
 	bool "MediaTek PCIe Gen2 controller"
-	depends on DM_PCI
 	depends on ARCH_MEDIATEK
 	help
 	  Say Y here if you want to enable Gen2 PCIe controller,
@@ -329,7 +298,6 @@
 config PCIE_ROCKCHIP
 	bool "Enable Rockchip PCIe driver"
 	depends on ARCH_ROCKCHIP
-	select DM_PCI
 	select PHY_ROCKCHIP_PCIE
 	default y if ROCKCHIP_RK3399
 	help
@@ -347,7 +315,6 @@
 
 config PCI_BRCMSTB
 	bool "Broadcom STB PCIe controller"
-	depends on DM_PCI
 	depends on ARCH_BCM283X
 	help
 	  Say Y here if you want to enable support for PCIe controller
@@ -357,7 +324,6 @@
 
 config PCIE_UNIPHIER
 	bool "Socionext UniPhier PCIe driver"
-	depends on DM_PCI
 	depends on ARCH_UNIPHIER
 	select PHY_UNIPHIER_PCIE
 	help
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index bdfdec9..4a131bf 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -14,7 +14,6 @@
 obj-$(CONFIG_PCIE_ECAM_GENERIC) += pcie_ecam_generic.o
 obj-$(CONFIG_PCIE_ECAM_SYNQUACER) += pcie_ecam_synquacer.o
 obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o
-obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o
 obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o
 obj-$(CONFIG_PCI_MPC85XX) += pci_mpc85xx.o
 obj-$(CONFIG_PCI_MSC01) += pci_msc01.o
diff --git a/drivers/pci/pci_indirect.c b/drivers/pci/pci_indirect.c
deleted file mode 100644
index 6134c22..0000000
--- a/drivers/pci/pci_indirect.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Support for indirect PCI bridges.
- *
- * Copyright (C) 1998 Gabriel Paubert.
- */
-
-#include <common.h>
-
-#if !defined(__I386__) && !defined(CONFIG_DM_PCI)
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#define cfg_read(val, addr, type, op)	*val = op((type)(addr))
-#define cfg_write(val, addr, type, op)	op((type *)(addr), (val))
-
-#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
-#define INDIRECT_PCI_OP(rw, size, type, op, mask)                        \
-static int                                                               \
-indirect_##rw##_config_##size(struct pci_controller *hose,               \
-			      pci_dev_t dev, int offset, type val)       \
-{                                                                        \
-	u32 b, d,f;							 \
-	b = PCI_BUS(dev); d = PCI_DEV(dev); f = PCI_FUNC(dev);		 \
-	b = b - hose->first_busno;					 \
-	dev = PCI_BDF(b, d, f);						 \
-	*(hose->cfg_addr) = dev | (offset & 0xfc) | ((offset & 0xf00) << 16) | 0x80000000; \
-	sync();                                                          \
-	cfg_##rw(val, hose->cfg_data + (offset & mask), type, op);       \
-	return 0;                                                        \
-}
-#else
-#define INDIRECT_PCI_OP(rw, size, type, op, mask)			 \
-static int								 \
-indirect_##rw##_config_##size(struct pci_controller *hose,		 \
-			      pci_dev_t dev, int offset, type val)	 \
-{									 \
-	u32 b, d,f;							 \
-	b = PCI_BUS(dev); d = PCI_DEV(dev); f = PCI_FUNC(dev);		 \
-	b = b - hose->first_busno;					 \
-	dev = PCI_BDF(b, d, f);						 \
-	out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000);	 \
-	cfg_##rw(val, hose->cfg_data + (offset & mask), type, op);	 \
-	return 0;							 \
-}
-#endif
-
-INDIRECT_PCI_OP(read, byte, u8 *, in_8, 3)
-INDIRECT_PCI_OP(read, word, u16 *, in_le16, 2)
-INDIRECT_PCI_OP(read, dword, u32 *, in_le32, 0)
-INDIRECT_PCI_OP(write, byte, u8, out_8, 3)
-INDIRECT_PCI_OP(write, word, u16, out_le16, 2)
-INDIRECT_PCI_OP(write, dword, u32, out_le32, 0)
-
-void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
-{
-	pci_set_ops(hose,
-		    indirect_read_config_byte,
-		    indirect_read_config_word,
-		    indirect_read_config_dword,
-		    indirect_write_config_byte,
-		    indirect_write_config_word,
-		    indirect_write_config_dword);
-
-	hose->cfg_addr = (unsigned int *) cfg_addr;
-	hose->cfg_data = (unsigned char *) cfg_data;
-}
-
-#endif	/* !__I386__ */
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index e12699b..d07e9a2 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -271,7 +271,7 @@
 
 config OCTEON_SPI
 	bool "Octeon SPI driver"
-	depends on DM_PCI && (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
+	depends on ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2
 	help
 	  Enable the Octeon SPI driver. This driver can be used to
 	  access the SPI NOR flash on Octeon II/III and OcteonTX/TX2
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index 1835607..863c3fb 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -31,7 +31,7 @@
 
 config VIRTIO_PCI
 	bool "PCI driver for virtio devices"
-	depends on DM_PCI
+	depends on PCI
 	select VIRTIO
 	help
 	  This driver provides support for virtio based paravirtual device
diff --git a/include/ahci.h b/include/ahci.h
index fb96dd8..d545304 100644
--- a/include/ahci.h
+++ b/include/ahci.h
@@ -148,16 +148,12 @@
  * where dev is the controller (although at present it sometimes stands alone).
  */
 struct ahci_uc_priv {
-#if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
 	/*
 	 * TODO(sjg@chromium.org): Drop this once this structure is only used
 	 * in a driver-model context (i.e. attached to a device with
 	 * dev_get_uclass_priv()
 	 */
 	struct udevice *dev;
-#else
-	pci_dev_t	dev;
-#endif
 	struct ahci_ioports	port[AHCI_MAX_PORTS];
 	u16 *ataid[AHCI_MAX_PORTS];
 	u32	n_ports;
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index d6ae419..b4e1cae 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -303,10 +303,6 @@
 #define CONFIG_SYS_SICRH 0
 #define CONFIG_SYS_SICRL SICRL_LDP_A
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #endif
diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h
index 8ebca99..7924cbc 100644
--- a/include/configs/MPC8349EMDS_SDRAM.h
+++ b/include/configs/MPC8349EMDS_SDRAM.h
@@ -360,10 +360,6 @@
 #define CONFIG_SYS_SICRH 0
 #define CONFIG_SYS_SICRL SICRL_LDP_A
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #endif
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 0a136b4..a13b178 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -255,8 +255,6 @@
 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00800000
 
 #ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-
 #undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
 #endif	/* CONFIG_PCI */
 
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index ac9afa1..549fbfa 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -26,7 +26,6 @@
 #define CONFIG_HAS_FEC		1	/* 8540 has FEC */
 #endif
 
-#define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
 /*
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 02aeb6f..5254936 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -27,7 +27,6 @@
  * assume U-Boot is less than 0.5MB
  */
 
-#define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #undef CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
 #define CONFIG_RESET_PHY_R	1	/* Call reset_phy() */
diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h
deleted file mode 100644
index d9a777e..0000000
--- a/include/configs/UCP1020.h
+++ /dev/null
@@ -1,832 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013-2019 Arcturus Networks, Inc.
- *           https://www.arcturusnetworks.com/products/ucp1020/
- * based on include/configs/p1_p2_rdb_pc.h
- * original copyright follows:
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- */
-
-/*
- * QorIQ uCP1020-xx boards configuration file
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-/*** Arcturus FirmWare Environment */
-
-#define MAX_SERIAL_SIZE 15
-#define MAX_HWADDR_SIZE 17
-
-#define MAX_FWENV_ADDR	4
-
-#define FWENV_MMC	1
-#define FWENV_SPI_FLASH	2
-#define FWENV_NOR_FLASH	3
-/*
- #define FWENV_TYPE    FWENV_MMC
- #define FWENV_TYPE    FWENV_SPI_FLASH
-*/
-#define FWENV_TYPE	FWENV_NOR_FLASH
-
-#if (FWENV_TYPE == FWENV_MMC)
-#define FWENV_ADDR1 -1
-#define FWENV_ADDR2 -1
-#define FWENV_ADDR3 -1
-#define FWENV_ADDR4 -1
-#define EMPY_CHAR 0
-#endif
-
-#if (FWENV_TYPE == FWENV_SPI_FLASH)
-#ifndef CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_SF_DEFAULT_SPEED	1000000
-#endif
-#ifndef CONFIG_SF_DEFAULT_MODE
-#define CONFIG_SF_DEFAULT_MODE	SPI_MODE0
-#endif
-#ifndef CONFIG_SF_DEFAULT_CS
-#define CONFIG_SF_DEFAULT_CS	0
-#endif
-#ifndef CONFIG_SF_DEFAULT_BUS
-#define CONFIG_SF_DEFAULT_BUS	0
-#endif
-#define FWENV_ADDR1 (0x200 - sizeof(smac))
-#define FWENV_ADDR2 (0x400 - sizeof(smac))
-#define FWENV_ADDR3 (CONFIG_ENV_SECT_SIZE + 0x200 - sizeof(smac))
-#define FWENV_ADDR4 (CONFIG_ENV_SECT_SIZE + 0x400 - sizeof(smac))
-#define EMPY_CHAR 0xff
-#endif
-
-#if (FWENV_TYPE == FWENV_NOR_FLASH)
-#define FWENV_ADDR1 0xEC080000
-#define FWENV_ADDR2 -1
-#define FWENV_ADDR3 -1
-#define FWENV_ADDR4 -1
-#define EMPY_CHAR 0xff
-#endif
-/***********************************/
-
-#define CONFIG_PCIE1	/* PCIE controller 1 (slot 1) */
-#define CONFIG_PCIE2	/* PCIE controller 2 (slot 2) */
-#define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
-
-#if defined(CONFIG_TARTGET_UCP1020T1)
-
-#define CONFIG_UCP1020_REV_1_3
-
-#define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1"
-
-#define CONFIG_TSEC1
-#define CONFIG_TSEC3
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETHADDR		00:19:D3:FF:FF:FF
-#define CONFIG_ETH1ADDR		00:19:D3:FF:FF:FE
-#define CONFIG_ETH2ADDR		00:19:D3:FF:FF:FD
-#define CONFIG_IPADDR		10.80.41.229
-#define CONFIG_SERVERIP		10.80.41.227
-#define CONFIG_NETMASK		255.255.252.0
-#define CONFIG_ETHPRIME		"eTSEC3"
-
-#define CONFIG_SYS_L2_SIZE	(256 << 10)
-
-#endif
-
-#if defined(CONFIG_TARGET_UCP1020)
-
-#define CONFIG_UCP1020
-#define CONFIG_UCP1020_REV_1_3
-
-#define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR"
-
-#define CONFIG_TSEC1
-#define CONFIG_TSEC3
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETHADDR		00:06:3B:FF:FF:FF
-#define CONFIG_ETH1ADDR		00:06:3B:FF:FF:FE
-#define CONFIG_ETH2ADDR		00:06:3B:FF:FF:FD
-#define CONFIG_IPADDR		192.168.1.81
-#define CONFIG_IPADDR1		192.168.1.82
-#define CONFIG_IPADDR2		192.168.1.83
-#define CONFIG_SERVERIP		192.168.1.80
-#define CONFIG_GATEWAYIP	102.168.1.1
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_ETHPRIME		"eTSEC1"
-
-#define CONFIG_SYS_L2_SIZE	(256 << 10)
-
-#endif
-
-#ifdef CONFIG_SDCARD
-#define CONFIG_RAMBOOT_SDCARD
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
-#endif
-
-#ifdef CONFIG_SPIFLASH
-#define CONFIG_RAMBOOT_SPIFLASH
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
-#endif
-
-#define CONFIG_SYS_TEXT_BASE_NOR	0xeff80000
-
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
-#endif
-
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif
-
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-#define CONFIG_LBA48
-
-#define CONFIG_SYS_CLK_FREQ	66666666
-#define CONFIG_DDR_CLK_FREQ	66666666
-
-#define CONFIG_HWCONFIG
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE
-#define CONFIG_BTB
-
-#define CONFIG_ENABLE_36BIT_PHYS
-
-#define CONFIG_SYS_CCSRBAR		0xffe00000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
-
-/* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
-       SPL code*/
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#endif
-
-/* DDR Setup */
-#define CONFIG_DDR_ECC_ENABLE
-#ifndef CONFIG_DDR_ECC_ENABLE
-#define CONFIG_SYS_DDR_RAW_TIMING
-#define CONFIG_DDR_SPD
-#endif
-#define CONFIG_SYS_SPD_BUS_NUM 1
-
-#define CONFIG_SYS_SDRAM_SIZE_LAW	LAW_SIZE_512M
-#define CONFIG_CHIP_SELECTS_PER_CTRL	1
-#define CONFIG_SYS_SDRAM_SIZE		(1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-
-/* Default settings for DDR3 */
-#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
-#define CONFIG_SYS_DDR_CS0_CONFIG	0x80014302
-#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
-#define CONFIG_SYS_DDR_CS1_BNDS		0x0040007f
-#define CONFIG_SYS_DDR_CS1_CONFIG	0x80014302
-#define CONFIG_SYS_DDR_CS1_CONFIG_2	0x00000000
-
-#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
-#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
-
-#define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
-#define CONFIG_SYS_DDR_WRLVL_CONTROL	0x8655A608
-#define CONFIG_SYS_DDR_SR_CNTR		0x00000000
-#define CONFIG_SYS_DDR_RCW_1		0x00000000
-#define CONFIG_SYS_DDR_RCW_2		0x00000000
-#ifdef CONFIG_DDR_ECC_ENABLE
-#define CONFIG_SYS_DDR_CONTROL		0xE70C0000	/* Type = DDR3 & ECC */
-#else
-#define CONFIG_SYS_DDR_CONTROL		0xC70C0000	/* Type = DDR3 */
-#endif
-#define CONFIG_SYS_DDR_CONTROL_2	0x04401050
-#define CONFIG_SYS_DDR_TIMING_4		0x00220001
-#define CONFIG_SYS_DDR_TIMING_5		0x03402400
-
-#define CONFIG_SYS_DDR_TIMING_3		0x00020000
-#define CONFIG_SYS_DDR_TIMING_0		0x00330004
-#define CONFIG_SYS_DDR_TIMING_1		0x6f6B4846
-#define CONFIG_SYS_DDR_TIMING_2		0x0FA8C8CF
-#define CONFIG_SYS_DDR_CLK_CTRL		0x03000000
-#define CONFIG_SYS_DDR_MODE_1		0x40461520
-#define CONFIG_SYS_DDR_MODE_2		0x8000c000
-#define CONFIG_SYS_DDR_INTERVAL		0x0C300000
-
-/*
- * Memory map
- *
- * 0x0000_0000 0x7fff_ffff	DDR		Up to 2GB cacheable
- * 0x8000_0000 0xdfff_ffff	PCI Express Mem	1G non-cacheable(PCIe * 2)
- * 0xec00_0000 0xefff_ffff	NOR flash	Up to 64M non-cacheable	CS0/1
- * 0xf8f8_0000 0xf8ff_ffff	L2 SRAM		Up to 256K cacheable
- *   (early boot only)
- * 0xffc0_0000 0xffc3_ffff	PCI IO range	256k non-cacheable
- * 0xffd0_0000 0xffd0_3fff	L1 for stack	16K cacheable
- * 0xffe0_0000 0xffef_ffff	CCSR		1M non-cacheable
- */
-
-/*
- * Local Bus Definitions
- */
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* 64M */
-#define CONFIG_SYS_FLASH_BASE		0xec000000
-
-#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
-	| BR_PS_16 | BR_V)
-
-#define CONFIG_FLASH_OR_PRELIM		0xfc000ff7
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000 /* stack in RAM */
-/* Initial L1 address */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS	CONFIG_SYS_INIT_RAM_ADDR
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
-/* Size of used area in RAM */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x00004000
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)/* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 1024)/* Reserved for malloc */
-
-#define CONFIG_SYS_PMC_BASE	0xff980000
-#define CONFIG_SYS_PMC_BASE_PHYS	CONFIG_SYS_PMC_BASE
-#define CONFIG_PMC_BR_PRELIM	(BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
-					BR_PS_8 | BR_V)
-#define CONFIG_PMC_OR_PRELIM	(OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
-				 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
-				 OR_GPCM_EAD)
-
-#define CONFIG_SYS_BR0_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
-#define CONFIG_SYS_OR0_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
-#ifdef CONFIG_NAND_FSL_ELBC
-#define CONFIG_SYS_BR1_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
-#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
-
-/* Serial Port - controlled on board with jumper J8
- * open - index 2
- * shorted - index 1
- */
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
-#define CONFIG_NS16550_MIN_FUNCTIONS
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR + 0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C_LEGACY
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
-#define CONFIG_SYS_SPD_BUS_NUM		1 /* For rom_loc and flash bank */
-
-#define CONFIG_RTC_DS1337
-#define CONFIG_RTC_DS1337_NOOSC
-#define CONFIG_SYS_I2C_RTC_ADDR		0x68
-#define CONFIG_SYS_I2C_PCA9557_ADDR	0x18
-#define CONFIG_SYS_I2C_NCT72_ADDR	0x4C
-#define CONFIG_SYS_I2C_IDT6V49205B	0x69
-
-#if defined(CONFIG_PCI)
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-/* controller 2, direct to uli, tgtid 2, Base address 9000 */
-#define CONFIG_SYS_PCIE2_NAME		"PCIe SLOT CON9"
-#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
-#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
-
-/* controller 1, Slot 2, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_NAME		"PCIe SLOT CON10"
-#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xffc00000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
-
-#define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#endif /* CONFIG_PCI */
-
-/*
- * Environment
- */
-#if !defined(CONFIG_ENV_FIT_UCBOOT) && defined(CONFIG_RAMBOOT_SDCARD)
-#define CONFIG_FSL_FIXED_MMC_LOCATION
-#endif
-
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
-/*
- * USB
- */
-#define CONFIG_HAS_FSL_DR_USB
-
-#if defined(CONFIG_HAS_FSL_DR_USB)
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_EHCI_FSL
-#endif
-#endif
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#endif
-
-/* Misc Extra Settings */
-#undef CONFIG_WATCHDOG	/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms tick */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory for Linux*/
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-
-#if defined(CONFIG_UCP1020_REV_1_2) || defined(CONFIG_UCP1020_REV_1_3)
-#else
-#error "UCP1020 module revision is not defined !!!"
-#endif
-
-#define CONFIG_BOOTP_SERVERIP
-
-#define CONFIG_TSEC1_NAME	"eTSEC1"
-#define CONFIG_TSEC2_NAME	"eTSEC2"
-#define CONFIG_TSEC3_NAME	"eTSEC3"
-
-#define TSEC1_PHY_ADDR	4
-#define TSEC2_PHY_ADDR	0
-#define TSEC2_PHY_ADDR_SGMII	0x00
-#define TSEC3_PHY_ADDR	6
-
-#define TSEC1_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC3_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
-
-#define TSEC1_PHYIDX	0
-#define TSEC2_PHYIDX	0
-#define TSEC3_PHYIDX	0
-
-#endif
-
-#define CONFIG_HOSTNAME		"UCP1020"
-#define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_UBOOTPATH	u-boot.bin /* U-Boot image on TFTP server */
-
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
-
-#if defined(CONFIG_DONGLE)
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-"bootcmd=run prog_spi_mbrbootcramfs\0"					\
-"bootfile=uImage\0"							\
-"consoledev=ttyS0\0"							\
-"cramfsfile=image.cramfs\0"						\
-"dtbaddr=0x00c00000\0"							\
-"dtbfile=image.dtb\0"							\
-"ethaddr=" __stringify(CONFIG_ETHADDR) "\0"				\
-"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"				\
-"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"				\
-"fileaddr=0x01000000\0"							\
-"filesize=0x00080000\0"							\
-"flashmbr=sf probe 0; "							\
-	"tftp $loadaddr $mbr; "						\
-	"sf erase $mbr_offset +$filesize; "				\
-	"sf write $loadaddr $mbr_offset $filesize\0"			\
-"flashrecovery=tftp $recoveryaddr $cramfsfile; "			\
-	"protect off $nor_recoveryaddr +$filesize; "			\
-	"erase $nor_recoveryaddr +$filesize; "				\
-	"cp.b $recoveryaddr $nor_recoveryaddr $filesize; "		\
-	"protect on $nor_recoveryaddr +$filesize\0 "			\
-"flashuboot=tftp $ubootaddr $ubootfile; "				\
-	"protect off $nor_ubootaddr +$filesize; "			\
-	"erase $nor_ubootaddr +$filesize; "				\
-	"cp.b $ubootaddr $nor_ubootaddr $filesize; "			\
-	"protect on $nor_ubootaddr +$filesize\0 "			\
-"flashworking=tftp $workingaddr $cramfsfile; "				\
-	"protect off $nor_workingaddr +$filesize; "			\
-	"erase $nor_workingaddr +$filesize; "				\
-	"cp.b $workingaddr $nor_workingaddr $filesize; "		\
-	"protect on $nor_workingaddr +$filesize\0 "			\
-"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "				\
-"kerneladdr=0x01100000\0"						\
-"kernelfile=uImage\0"							\
-"loadaddr=0x01000000\0"							\
-"mbr=uCP1020d.mbr\0"							\
-"mbr_offset=0x00000000\0"						\
-"mmbr=uCP1020Quiet.mbr\0"						\
-"mmcpart=0:2\0"								\
-"mmc__mbrd=fatload mmc $mmcpart $loadaddr $mbr; "			\
-	"mmc erase 1 1; "						\
-	"mmc write $loadaddr 1 1\0"					\
-"mmc__uboot=fatload mmc $mmcpart $loadaddr $ubootfile; "		\
-	"mmc erase 0x40 0x400; "					\
-	"mmc write $loadaddr 0x40 0x400\0"				\
-"netdev=eth0\0"								\
-"nor_recoveryaddr=0xEC0A0000\0"						\
-"nor_ubootaddr=0xEFF80000\0"						\
-"nor_workingaddr=0xECFA0000\0"						\
-"norbootrecovery=setenv bootargs $recoverybootargs"			\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"run norloadrecovery; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norbootworking=setenv bootargs $workingbootargs"			\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"run norloadworking; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $nor_recoveryaddr; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"norloadworking=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $nor_workingaddr; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"prog_spi_mbr=run spi__mbr\0"						\
-"prog_spi_mbrboot=run spi__mbr; run spi__boot1; run spi__boot2\0"	\
-"prog_spi_mbrbootcramfs=run spi__mbr; run spi__boot1; run spi__boot2; "	\
-	"run spi__cramfs\0"						\
-"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"	\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"tftp $rootfsaddr $rootfsfile; "				\
-	"tftp $loadaddr $kernelfile; "					\
-	"tftp $dtbaddr $dtbfile; "					\
-	"bootm $loadaddr $rootfsaddr $dtbaddr\0"			\
-"ramdisk_size=120000\0"							\
-"ramdiskfile=rootfs.ext2.gz.uboot\0"					\
-"recoveryaddr=0x02F00000\0"						\
-"recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0"		\
-"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "	\
-	"mw.l 0xffe0f008 0x00400000\0"					\
-"rootfsaddr=0x02F00000\0"						\
-"rootfsfile=rootfs.ext2.gz.uboot\0"					\
-"rootpath=/opt/nfsroot\0"						\
-"spi__boot1=fatload mmc $mmcpart $loadaddr u-boot.bin; "		\
-	"protect off 0xeC000000 +$filesize; "				\
-	"erase 0xEC000000 +$filesize; "					\
-	"cp.b $loadaddr 0xEC000000 $filesize; "				\
-	"cmp.b $loadaddr 0xEC000000 $filesize; "			\
-	"protect on 0xeC000000 +$filesize\0"				\
-"spi__boot2=fatload mmc $mmcpart $loadaddr u-boot.bin; "		\
-	"protect off 0xeFF80000 +$filesize; "				\
-	"erase 0xEFF80000 +$filesize; "					\
-	"cp.b $loadaddr 0xEFF80000 $filesize; "				\
-	"cmp.b $loadaddr 0xEFF80000 $filesize; "			\
-	"protect on 0xeFF80000 +$filesize\0"				\
-"spi__bootd=fatload mmc $mmcpart $loadaddr $ubootd; "			\
-	"sf probe 0; sf erase 0x8000 +$filesize; "			\
-	"sf write $loadaddr 0x8000 $filesize\0"				\
-"spi__cramfs=fatload mmc $mmcpart $loadaddr image.cramfs; "		\
-	"protect off 0xec0a0000 +$filesize; "				\
-	"erase 0xeC0A0000 +$filesize; "					\
-	"cp.b $loadaddr 0xeC0A0000 $filesize; "				\
-	"protect on 0xec0a0000 +$filesize\0"				\
-"spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; "			\
-	"sf probe 1; sf erase 0 +$filesize; "				\
-	"sf write $loadaddr 0 $filesize\0"				\
-"spi__mbrd=fatload mmc $mmcpart $loadaddr $mbr; "			\
-	"sf probe 0; sf erase 0 +$filesize; "				\
-	"sf write $loadaddr 0 $filesize\0"				\
-"tftpflash=tftpboot $loadaddr $uboot; "					\
-	"protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "	\
-	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
-	"protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
-"uboot= " __stringify(CONFIG_UBOOTPATH) "\0"				\
-"ubootaddr=0x01000000\0"						\
-"ubootfile=u-boot.bin\0"						\
-"ubootd=u-boot4dongle.bin\0"						\
-"upgrade=run flashworking\0"						\
-"usb_phy_type=ulpi\0 "							\
-"workingaddr=0x02F00000\0"						\
-"workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
-
-#else
-
-#if defined(CONFIG_UCP1020T1)
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-"bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0"	\
-"bootfile=uImage\0"							\
-"consoledev=ttyS0\0"							\
-"cramfsfile=image.cramfs\0"						\
-"dtbaddr=0x00c00000\0"							\
-"dtbfile=image.dtb\0"							\
-"ethaddr=" __stringify(CONFIG_ETHADDR) "\0"				\
-"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"				\
-"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"				\
-"fileaddr=0x01000000\0"							\
-"filesize=0x00080000\0"							\
-"flashmbr=sf probe 0; "							\
-	"tftp $loadaddr $mbr; "						\
-	"sf erase $mbr_offset +$filesize; "				\
-	"sf write $loadaddr $mbr_offset $filesize\0"			\
-"flashrecovery=tftp $recoveryaddr $cramfsfile; "			\
-	"protect off $nor_recoveryaddr +$filesize; "			\
-	"erase $nor_recoveryaddr +$filesize; "				\
-	"cp.b $recoveryaddr $nor_recoveryaddr $filesize; "		\
-	"protect on $nor_recoveryaddr +$filesize\0 "			\
-"flashuboot=tftp $ubootaddr $ubootfile; "				\
-	"protect off $nor_ubootaddr +$filesize; "			\
-	"erase $nor_ubootaddr +$filesize; "				\
-	"cp.b $ubootaddr $nor_ubootaddr $filesize; "			\
-	"protect on $nor_ubootaddr +$filesize\0 "			\
-"flashworking=tftp $workingaddr $cramfsfile; "				\
-	"protect off $nor_workingaddr +$filesize; "			\
-	"erase $nor_workingaddr +$filesize; "				\
-	"cp.b $workingaddr $nor_workingaddr $filesize; "		\
-	"protect on $nor_workingaddr +$filesize\0 "			\
-"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "				\
-"kerneladdr=0x01100000\0"						\
-"kernelfile=uImage\0"							\
-"loadaddr=0x01000000\0"							\
-"mbr=uCP1020.mbr\0"							\
-"mbr_offset=0x00000000\0"						\
-"netdev=eth0\0"								\
-"nor_recoveryaddr=0xEC0A0000\0"						\
-"nor_ubootaddr=0xEFF80000\0"						\
-"nor_workingaddr=0xECFA0000\0"						\
-"norbootrecovery=setenv bootargs $recoverybootargs"			\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"run norloadrecovery; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norbootworking=setenv bootargs $workingbootargs"			\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"run norloadworking; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $nor_recoveryaddr; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"norloadworking=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $nor_workingaddr; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"othbootargs=quiet\0"							\
-"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"	\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"tftp $rootfsaddr $rootfsfile; "				\
-	"tftp $loadaddr $kernelfile; "					\
-	"tftp $dtbaddr $dtbfile; "					\
-	"bootm $loadaddr $rootfsaddr $dtbaddr\0"			\
-"ramdisk_size=120000\0"							\
-"ramdiskfile=rootfs.ext2.gz.uboot\0"					\
-"recoveryaddr=0x02F00000\0"						\
-"recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0"		\
-"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "	\
-	"mw.l 0xffe0f008 0x00400000\0"					\
-"rootfsaddr=0x02F00000\0"						\
-"rootfsfile=rootfs.ext2.gz.uboot\0"					\
-"rootpath=/opt/nfsroot\0"						\
-"silent=1\0"								\
-"tftpflash=tftpboot $loadaddr $uboot; "					\
-	"protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "	\
-	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
-	"protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
-"uboot= " __stringify(CONFIG_UBOOTPATH) "\0"				\
-"ubootaddr=0x01000000\0"						\
-"ubootfile=u-boot.bin\0"						\
-"upgrade=run flashworking\0"						\
-"workingaddr=0x02F00000\0"						\
-"workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
-
-#else /* For Arcturus Modules */
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-"bootcmd=run norkernel\0"						\
-"bootfile=uImage\0"							\
-"consoledev=ttyS0\0"							\
-"dtbaddr=0x00c00000\0"							\
-"dtbfile=image.dtb\0"							\
-"ethaddr=" __stringify(CONFIG_ETHADDR) "\0"				\
-"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"				\
-"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"				\
-"fileaddr=0x01000000\0"							\
-"filesize=0x00080000\0"							\
-"flashmbr=sf probe 0; "							\
-	"tftp $loadaddr $mbr; "						\
-	"sf erase $mbr_offset +$filesize; "				\
-	"sf write $loadaddr $mbr_offset $filesize\0"			\
-"flashuboot=tftp $loadaddr $ubootfile; "				\
-	"protect off $nor_ubootaddr0 +$filesize; "			\
-	"erase $nor_ubootaddr0 +$filesize; "				\
-	"cp.b $loadaddr $nor_ubootaddr0 $filesize; "			\
-	"protect on $nor_ubootaddr0 +$filesize; "			\
-	"protect off $nor_ubootaddr1 +$filesize; "			\
-	"erase $nor_ubootaddr1 +$filesize; "				\
-	"cp.b $loadaddr $nor_ubootaddr1 $filesize; "			\
-	"protect on $nor_ubootaddr1 +$filesize\0 "			\
-"format0=protect off $part0base +$part0size; "				\
-	"erase $part0base +$part0size\0"				\
-"format1=protect off $part1base +$part1size; "				\
-	"erase $part1base +$part1size\0"				\
-"format2=protect off $part2base +$part2size; "				\
-	"erase $part2base +$part2size\0"				\
-"format3=protect off $part3base +$part3size; "				\
-	"erase $part3base +$part3size\0"				\
-"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "				\
-"kerneladdr=0x01100000\0"						\
-"kernelargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"			\
-"kernelfile=uImage\0"							\
-"loadaddr=0x01000000\0"							\
-"mbr=uCP1020.mbr\0"							\
-"mbr_offset=0x00000000\0"						\
-"netdev=eth0\0"								\
-"nor_ubootaddr0=0xEC000000\0"						\
-"nor_ubootaddr1=0xEFF80000\0"						\
-"norkernel=setenv bootargs $kernelargs console=$consoledev,$baudrate; "	\
-	"run norkernelload; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norkernelload=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $part0base; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"part0base=0xEC100000\0"						\
-"part0size=0x00700000\0"						\
-"part1base=0xEC800000\0"						\
-"part1size=0x02000000\0"						\
-"part2base=0xEE800000\0"						\
-"part2size=0x00800000\0"						\
-"part3base=0xEF000000\0"						\
-"part3size=0x00F80000\0"						\
-"partENVbase=0xEC080000\0"						\
-"partENVsize=0x00080000\0"						\
-"program0=tftp part0-000000.bin; "					\
-	"protect off $part0base +$filesize; "				\
-	"erase $part0base +$filesize; "					\
-	"cp.b $loadaddr $part0base $filesize; "				\
-	"echo Verifying...; "						\
-	"cmp.b $loadaddr $part0base $filesize\0"			\
-"program1=tftp part1-000000.bin; "					\
-	"protect off $part1base +$filesize; "				\
-	"erase $part1base +$filesize; "					\
-	"cp.b $loadaddr $part1base $filesize; "				\
-	"echo Verifying...; "						\
-	"cmp.b $loadaddr $part1base $filesize\0"			\
-"program2=tftp part2-000000.bin; "					\
-	"protect off $part2base +$filesize; "				\
-	"erase $part2base +$filesize; "					\
-	"cp.b $loadaddr $part2base $filesize; "				\
-	"echo Verifying...; "						\
-	"cmp.b $loadaddr $part2base $filesize\0"			\
-"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"	\
-	"  console=$consoledev,$baudrate $othbootargs; "		\
-	"tftp $rootfsaddr $rootfsfile; "				\
-	"tftp $loadaddr $kernelfile; "					\
-	"tftp $dtbaddr $dtbfile; "					\
-	"bootm $loadaddr $rootfsaddr $dtbaddr\0"			\
-"ramdisk_size=120000\0"							\
-"ramdiskfile=rootfs.ext2.gz.uboot\0"					\
-"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "	\
-	"mw.l 0xffe0f008 0x00400000\0"					\
-"rootfsaddr=0x02F00000\0"						\
-"rootfsfile=rootfs.ext2.gz.uboot\0"					\
-"rootpath=/opt/nfsroot\0"						\
-"spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; "			\
-	"sf probe 0; sf erase 0 +$filesize; "				\
-	"sf write $loadaddr 0 $filesize\0"				\
-"spi__boot=fatload mmc $mmcpart $loadaddr u-boot.bin; "			\
-	"protect off 0xeC000000 +$filesize; "				\
-	"erase 0xEC000000 +$filesize; "					\
-	"cp.b $loadaddr 0xEC000000 $filesize; "				\
-	"cmp.b $loadaddr 0xEC000000 $filesize; "			\
-	"protect on 0xeC000000 +$filesize\0"				\
-"tftpflash=tftpboot $loadaddr $uboot; "					\
-	"protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "	\
-	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
-	"protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
-"uboot= " __stringify(CONFIG_UBOOTPATH) "\0"				\
-"ubootfile=u-boot.bin\0"						\
-"upgrade=run flashuboot\0"						\
-"usb_phy_type=ulpi\0 "							\
-"boot_nfs= "								\
-	"setenv bootargs root=/dev/nfs rw "				\
-	"nfsroot=$serverip:$rootpath "					\
-	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-	"console=$consoledev,$baudrate $othbootargs;"			\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr\0"					\
-"boot_hd = "								\
-	"setenv bootargs root=/dev/$bdev rw rootdelay=30 "		\
-	"console=$consoledev,$baudrate $othbootargs;"			\
-	"usb start;"							\
-	"ext2load usb 0:1 $loadaddr /boot/$bootfile;"			\
-	"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"			\
-	"bootm $loadaddr - $fdtaddr\0"					\
-"boot_usb_fat = "							\
-	"setenv bootargs root=/dev/ram rw "				\
-	"console=$consoledev,$baudrate $othbootargs "			\
-	"ramdisk_size=$ramdisk_size;"					\
-	"usb start;"							\
-	"fatload usb 0:2 $loadaddr $bootfile;"				\
-	"fatload usb 0:2 $fdtaddr $fdtfile;"				\
-	"fatload usb 0:2 $ramdiskaddr $ramdiskfile;"			\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr\0 "			\
-"boot_usb_ext2 = "							\
-	"setenv bootargs root=/dev/ram rw "				\
-	"console=$consoledev,$baudrate $othbootargs "			\
-	"ramdisk_size=$ramdisk_size;"					\
-	"usb start;"							\
-	"ext2load usb 0:4 $loadaddr $bootfile;"				\
-	"ext2load usb 0:4 $fdtaddr $fdtfile;"				\
-	"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"			\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr\0 "			\
-"boot_nor = "								\
-	"setenv bootargs root=/dev/$jffs2nor rw "			\
-	"console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"	\
-	"bootm $norbootaddr - $norfdtaddr\0 "				\
-"boot_ram = "								\
-	"setenv bootargs root=/dev/ram rw "				\
-	"console=$consoledev,$baudrate $othbootargs "			\
-	"ramdisk_size=$ramdisk_size;"					\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr\0"
-
-#endif
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/pci.h b/include/pci.h
index 4d77113..0fc22ad 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -623,13 +623,9 @@
  *	about a small subset of PCI devices. This is normally false.
  */
 struct pci_controller {
-#ifdef CONFIG_DM_PCI
 	struct udevice *bus;
 	struct udevice *ctlr;
 	bool skip_auto_config_until_reloc;
-#else
-	struct pci_controller *next;
-#endif
 
 	int first_busno;
 	int last_busno;
@@ -655,54 +651,12 @@
 	struct pci_config_table *config_table;
 
 	void (*fixup_irq)(struct pci_controller *, pci_dev_t);
-#ifndef CONFIG_DM_PCI
-	/* Low-level architecture-dependent routines */
-	int (*read_byte)(struct pci_controller*, pci_dev_t, int where, u8 *);
-	int (*read_word)(struct pci_controller*, pci_dev_t, int where, u16 *);
-	int (*read_dword)(struct pci_controller*, pci_dev_t, int where, u32 *);
-	int (*write_byte)(struct pci_controller*, pci_dev_t, int where, u8);
-	int (*write_word)(struct pci_controller*, pci_dev_t, int where, u16);
-	int (*write_dword)(struct pci_controller*, pci_dev_t, int where, u32);
-#endif
 
 	/* Used by auto config */
 	struct pci_region *pci_mem, *pci_io, *pci_prefetch;
-
-#ifndef CONFIG_DM_PCI
-	int current_busno;
-
-	void *priv_data;
-#endif
 };
 
-#ifndef CONFIG_DM_PCI
-static inline void pci_set_ops(struct pci_controller *hose,
-				   int (*read_byte)(struct pci_controller*,
-						    pci_dev_t, int where, u8 *),
-				   int (*read_word)(struct pci_controller*,
-						    pci_dev_t, int where, u16 *),
-				   int (*read_dword)(struct pci_controller*,
-						     pci_dev_t, int where, u32 *),
-				   int (*write_byte)(struct pci_controller*,
-						     pci_dev_t, int where, u8),
-				   int (*write_word)(struct pci_controller*,
-						     pci_dev_t, int where, u16),
-				   int (*write_dword)(struct pci_controller*,
-						      pci_dev_t, int where, u32)) {
-	hose->read_byte   = read_byte;
-	hose->read_word   = read_word;
-	hose->read_dword  = read_dword;
-	hose->write_byte  = write_byte;
-	hose->write_word  = write_word;
-	hose->write_dword = write_dword;
-}
-#endif
-
-#ifdef CONFIG_PCI_INDIRECT_BRIDGE
-extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data);
-#endif
-
-#if !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT)
+#if defined(CONFIG_DM_PCI_COMPAT)
 extern phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose,
 					pci_addr_t addr, unsigned long flags);
 extern pci_addr_t pci_hose_phys_to_bus(struct pci_controller* hose,
@@ -752,15 +706,6 @@
 				       pci_dev_t dev, int where, u32 val);
 #endif
 
-#ifndef CONFIG_DM_PCI
-extern int pci_read_config_byte(pci_dev_t dev, int where, u8 *val);
-extern int pci_read_config_word(pci_dev_t dev, int where, u16 *val);
-extern int pci_read_config_dword(pci_dev_t dev, int where, u32 *val);
-extern int pci_write_config_byte(pci_dev_t dev, int where, u8 val);
-extern int pci_write_config_word(pci_dev_t dev, int where, u16 val);
-extern int pci_write_config_dword(pci_dev_t dev, int where, u32 val);
-#endif
-
 void pciauto_region_init(struct pci_region *res);
 void pciauto_region_align(struct pci_region *res, pci_size_t size);
 void pciauto_config_init(struct pci_controller *hose);
@@ -780,7 +725,7 @@
 int pciauto_region_allocate(struct pci_region *res, pci_size_t size,
 			    pci_addr_t *bar, bool supports_64bit);
 
-#if !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT)
+#if defined(CONFIG_DM_PCI_COMPAT)
 extern int pci_hose_read_config_byte_via_dword(struct pci_controller *hose,
 					       pci_dev_t dev, int where, u8 *val);
 extern int pci_hose_read_config_word_via_dword(struct pci_controller *hose,
@@ -827,7 +772,7 @@
 int pci_hose_find_ext_capability(struct pci_controller *hose,
 				 pci_dev_t dev, int cap);
 
-#endif /* !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT) */
+#endif /* defined(CONFIG_DM_PCI_COMPAT) */
 
 const char * pci_class_str(u8 class);
 int pci_last_busno(void);
@@ -890,7 +835,6 @@
 
 struct udevice;
 
-#ifdef CONFIG_DM_PCI
 /**
  * struct pci_child_plat - information stored about each PCI device
  *
@@ -1691,8 +1635,6 @@
  */
 extern void board_pci_fixup_dev(struct udevice *bus, struct udevice *dev);
 
-#endif /* CONFIG_DM_PCI */
-
 /**
  * PCI_DEVICE - macro used to describe a specific pci device
  * @vend: the 16 bit PCI Vendor ID
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 337c444..7358cb6 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -190,7 +190,6 @@
 	return fdtdec_get_addr_size(blob, node, prop_name, NULL);
 }
 
-#if CONFIG_IS_ENABLED(PCI) && defined(CONFIG_DM_PCI)
 int fdtdec_get_pci_vendev(const void *blob, int node, u16 *vendor, u16 *device)
 {
 	const char *list, *end;
@@ -238,7 +237,15 @@
 		return -EINVAL;
 
 	barnum = (barnum - PCI_BASE_ADDRESS_0) / 4;
+
+	/*
+	 * There is a strange toolchain bug with nds32 which complains about
+	 * an undefined reference here, even if fdtdec_get_pci_bar32() is never
+	 * called. An #ifdef seems to be the only fix!
+	 */
+#if !IS_ENABLED(CONFIG_NDS32)
 	*bar = dm_pci_read_bar32(dev, barnum);
+#endif
 
 	return 0;
 }
@@ -258,7 +265,6 @@
 
 	return 0;
 }
-#endif
 
 uint64_t fdtdec_get_uint64(const void *blob, int node, const char *prop_name,
 			   uint64_t default_val)
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index d86f358..25f95da 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1087,7 +1087,6 @@
 CONFIG_PCI_EHCI_DEVICE
 CONFIG_PCI_EHCI_DEVNO
 CONFIG_PCI_GT64120
-CONFIG_PCI_INDIRECT_BRIDGE
 CONFIG_PCI_IO_BUS
 CONFIG_PCI_IO_PHYS
 CONFIG_PCI_IO_SIZE
@@ -1354,6 +1353,7 @@
 CONFIG_SOFT_I2C_GPIO_SDA
 CONFIG_SOFT_I2C_READ_REPEATED_START
 CONFIG_SPD_EEPROM
+CONFIG_SPIFLASH
 CONFIG_SPI_ADDR
 CONFIG_SPI_BOOTING
 CONFIG_SPI_DATAFLASH_WRITE_VERIFY
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 516f69d..55162e9 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -65,7 +65,7 @@
 obj-$(CONFIG_OSD) += osd.o
 obj-$(CONFIG_DM_VIDEO) += panel.o
 obj-$(CONFIG_EFI_PARTITION) += part.o
-obj-$(CONFIG_DM_PCI) += pci.o
+obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_P2SB) += p2sb.o
 obj-$(CONFIG_PCI_ENDPOINT) += pci_ep.o
 obj-$(CONFIG_PCH) += pch.o