ARM: tegra: pack pinmux data tables tighter
Use smaller fields in the Tegra pinmux structures in order to pack the
data tables into a smaller space. This saves around 1-3KB for the SPL
and around 3-8KB for the main build of U-Boot, depending on the board,
which SoC it uses, and how many pinmux table entries there are.
In order to pack PMUX_FUNC_* into a smaller space, don't hard-code the
values of PMUX_FUNC_RSVD* to values which require 16 bits to store them,
but instead let their values be assigned automatically, so they end up
fitting into 8 bits.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/arch/arm/include/asm/arch-tegra/pinmux.h b/arch/arm/include/asm/arch-tegra/pinmux.h
index 80b8046..035159d 100644
--- a/arch/arm/include/asm/arch-tegra/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra/pinmux.h
@@ -64,18 +64,18 @@
* available is pinmux_config_table() to configure a list of pins.
*/
struct pmux_pingrp_config {
- enum pmux_pingrp pingrp; /* pin group PMUX_PINGRP_... */
- enum pmux_func func; /* function to assign PMUX_FUNC_... */
- enum pmux_pull pull; /* pull up/down/normal PMUX_PULL_...*/
- enum pmux_tristate tristate; /* tristate or normal PMUX_TRI_... */
+ u32 pingrp:16; /* pin group PMUX_PINGRP_... */
+ u32 func:8; /* function to assign PMUX_FUNC_... */
+ u32 pull:2; /* pull up/down/normal PMUX_PULL_...*/
+ u32 tristate:2; /* tristate or normal PMUX_TRI_... */
#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC
- enum pmux_pin_io io; /* input or output PMUX_PIN_... */
- enum pmux_pin_lock lock; /* lock enable/disable PMUX_PIN... */
- enum pmux_pin_od od; /* open-drain or push-pull driver */
- enum pmux_pin_ioreset ioreset; /* input/output reset PMUX_PIN... */
+ u32 io:2; /* input or output PMUX_PIN_... */
+ u32 lock:2; /* lock enable/disable PMUX_PIN... */
+ u32 od:2; /* open-drain or push-pull driver */
+ u32 ioreset:2; /* input/output reset PMUX_PIN... */
#ifdef TEGRA_PMX_HAS_RCV_SEL
- enum pmux_pin_rcv_sel rcv_sel; /* select between High and Normal */
- /* VIL/VIH receivers */
+ u32 rcv_sel:2; /* select between High and Normal */
+ /* VIL/VIH receivers */
#endif
#endif
};
@@ -151,14 +151,14 @@
* This defines the configuration for a pin group's pad control config
*/
struct pmux_drvgrp_config {
- enum pmux_drvgrp drvgrp; /* pin group PMUX_DRVGRP_x */
- int slwf; /* falling edge slew */
- int slwr; /* rising edge slew */
- int drvup; /* pull-up drive strength */
- int drvdn; /* pull-down drive strength */
- enum pmux_lpmd lpmd; /* low-power mode selection */
- enum pmux_schmt schmt; /* schmidt enable */
- enum pmux_hsm hsm; /* high-speed mode enable */
+ u32 drvgrp:16; /* pin group PMUX_DRVGRP_x */
+ u32 slwf:3; /* falling edge slew */
+ u32 slwr:3; /* rising edge slew */
+ u32 drvup:8; /* pull-up drive strength */
+ u32 drvdn:8; /* pull-down drive strength */
+ u32 lpmd:3; /* low-power mode selection */
+ u32 schmt:2; /* schmidt enable */
+ u32 hsm:2; /* high-speed mode enable */
};
/**
@@ -173,10 +173,10 @@
#endif /* TEGRA_PMX_HAS_DRVGRPS */
struct pmux_pingrp_desc {
- enum pmux_func funcs[4];
+ u8 funcs[4];
#if defined(CONFIG_TEGRA20)
- u32 ctl_id;
- u32 pull_id;
+ u8 ctl_id;
+ u8 pull_id;
#endif /* CONFIG_TEGRA20 */
};
diff --git a/arch/arm/include/asm/arch-tegra114/pinmux.h b/arch/arm/include/asm/arch-tegra114/pinmux.h
index 0df69e3..c1cb3ef 100644
--- a/arch/arm/include/asm/arch-tegra114/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra114/pinmux.h
@@ -305,11 +305,11 @@
PMUX_FUNC_VI,
PMUX_FUNC_VI_ALT1,
PMUX_FUNC_VI_ALT3,
+ PMUX_FUNC_RSVD1,
+ PMUX_FUNC_RSVD2,
+ PMUX_FUNC_RSVD3,
+ PMUX_FUNC_RSVD4,
PMUX_FUNC_COUNT,
- PMUX_FUNC_RSVD1 = 0x8000,
- PMUX_FUNC_RSVD2 = 0x8001,
- PMUX_FUNC_RSVD3 = 0x8002,
- PMUX_FUNC_RSVD4 = 0x8003,
};
#define TEGRA_PMX_HAS_PIN_IO_BIT_ETC
diff --git a/arch/arm/include/asm/arch-tegra124/pinmux.h b/arch/arm/include/asm/arch-tegra124/pinmux.h
index 70254b5..c49801c 100644
--- a/arch/arm/include/asm/arch-tegra124/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra124/pinmux.h
@@ -327,11 +327,11 @@
PMUX_FUNC_VI_ALT3,
PMUX_FUNC_VIMCLK2,
PMUX_FUNC_VIMCLK2_ALT,
+ PMUX_FUNC_RSVD1,
+ PMUX_FUNC_RSVD2,
+ PMUX_FUNC_RSVD3,
+ PMUX_FUNC_RSVD4,
PMUX_FUNC_COUNT,
- PMUX_FUNC_RSVD1 = 0x8000,
- PMUX_FUNC_RSVD2 = 0x8001,
- PMUX_FUNC_RSVD3 = 0x8002,
- PMUX_FUNC_RSVD4 = 0x8003,
};
#define TEGRA_PMX_HAS_PIN_IO_BIT_ETC
diff --git a/arch/arm/include/asm/arch-tegra20/pinmux.h b/arch/arm/include/asm/arch-tegra20/pinmux.h
index d7802d9..11c0104 100644
--- a/arch/arm/include/asm/arch-tegra20/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra20/pinmux.h
@@ -225,11 +225,11 @@
PMUX_FUNC_VI,
PMUX_FUNC_VI_SENSOR_CLK,
PMUX_FUNC_XIO,
+ PMUX_FUNC_RSVD1,
+ PMUX_FUNC_RSVD2,
+ PMUX_FUNC_RSVD3,
+ PMUX_FUNC_RSVD4,
PMUX_FUNC_COUNT,
- PMUX_FUNC_RSVD1 = 0x8000,
- PMUX_FUNC_RSVD2 = 0x8001,
- PMUX_FUNC_RSVD3 = 0x8002,
- PMUX_FUNC_RSVD4 = 0x8003,
};
#include <asm/arch-tegra/pinmux.h>
diff --git a/arch/arm/include/asm/arch-tegra30/pinmux.h b/arch/arm/include/asm/arch-tegra30/pinmux.h
index 3fed194..6d83061 100644
--- a/arch/arm/include/asm/arch-tegra30/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra30/pinmux.h
@@ -383,11 +383,11 @@
PMUX_FUNC_VI_ALT1,
PMUX_FUNC_VI_ALT2,
PMUX_FUNC_VI_ALT3,
+ PMUX_FUNC_RSVD1,
+ PMUX_FUNC_RSVD2,
+ PMUX_FUNC_RSVD3,
+ PMUX_FUNC_RSVD4,
PMUX_FUNC_COUNT,
- PMUX_FUNC_RSVD1 = 0x8000,
- PMUX_FUNC_RSVD2 = 0x8001,
- PMUX_FUNC_RSVD3 = 0x8002,
- PMUX_FUNC_RSVD4 = 0x8003,
};
#define TEGRA_PMX_HAS_PIN_IO_BIT_ETC