diff --git a/arch/arm/mach-keystone/clock.c b/arch/arm/mach-keystone/clock.c
index 625907f..b5b66e4 100644
--- a/arch/arm/mach-keystone/clock.c
+++ b/arch/arm/mach-keystone/clock.c
@@ -18,189 +18,171 @@
 	int i;
 	for (i = 0; i < 100; i++) {
 		sdelay(450);
-		if ((pllctl_reg_read(data->pll, stat) & PLLSTAT_GO) == 0)
+		if (!(pllctl_reg_read(data->pll, stat) & PLLSTAT_GOSTAT_MASK))
 			break;
 	}
 }
 
-void init_pll(const struct pll_init_data *data)
+static inline void bypass_main_pll(const struct pll_init_data *data)
 {
-	u32 tmp, tmp_ctl, pllm, plld, pllod, bwadj;
+	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLENSRC_MASK |
+			   PLLCTL_PLLEN_MASK);
+
+	/* 4 cycles of reference clock CLKIN*/
+	sdelay(340);
+}
+
+static void configure_mult_div(const struct pll_init_data *data)
+{
+	u32 pllm, plld, bwadj;
 
 	pllm = data->pll_m - 1;
-	plld = (data->pll_d - 1) & PLL_DIV_MASK;
-	pllod = (data->pll_od - 1) & PLL_CLKOD_MASK;
+	plld = (data->pll_d - 1) & CFG_PLLCTL0_PLLD_MASK;
 
-	if (data->pll == MAIN_PLL) {
-		/* The requered delay before main PLL configuration */
-		sdelay(210000);
+	/* Program Multiplier */
+	if (data->pll == MAIN_PLL)
+		pllctl_reg_write(data->pll, mult, pllm & PLLM_MULT_LO_MASK);
 
-		tmp = pllctl_reg_read(data->pll, secctl);
+	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+			CFG_PLLCTL0_PLLM_MASK,
+			pllm << CFG_PLLCTL0_PLLM_SHIFT);
 
-		if (tmp & (PLLCTL_BYPASS)) {
-			setbits_le32(keystone_pll_regs[data->pll].reg1,
-				     BIT(MAIN_ENSAT_OFFSET));
+	/* Program BWADJ */
+	bwadj = (data->pll_m - 1) >> 1; /* Divide pllm by 2 */
+	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+			CFG_PLLCTL0_BWADJ_MASK,
+			(bwadj << CFG_PLLCTL0_BWADJ_SHIFT) &
+			CFG_PLLCTL0_BWADJ_MASK);
+	bwadj = bwadj >> CFG_PLLCTL0_BWADJ_BITS;
+	clrsetbits_le32(keystone_pll_regs[data->pll].reg1,
+			CFG_PLLCTL1_BWADJ_MASK, bwadj);
 
-			pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN |
-					   PLLCTL_PLLENSRC);
-			sdelay(340);
+	/* Program Divider */
+	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+			CFG_PLLCTL0_PLLD_MASK, plld);
+}
 
-			pllctl_reg_setbits(data->pll, secctl, PLLCTL_BYPASS);
-			pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLPWRDN);
-			sdelay(21000);
+void configure_main_pll(const struct pll_init_data *data)
+{
+	u32 tmp, pllod, i, alnctl_val = 0;
+	u32 *offset;
 
-			pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN);
-		} else {
-			pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN |
-					   PLLCTL_PLLENSRC);
-			sdelay(340);
-		}
+	pllod = data->pll_od - 1;
 
-		pllctl_reg_write(data->pll, mult, pllm & PLLM_MULT_LO_MASK);
+	/* 100 micro sec for stabilization */
+	sdelay(210000);
 
-		clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
-				PLLM_MULT_HI_SMASK, (pllm << 6));
+	tmp = pllctl_reg_read(data->pll, secctl);
 
-		/* Set the BWADJ     (12 bit field)  */
-		tmp_ctl = pllm >> 1; /* Divide the pllm by 2 */
-		clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
-				PLL_BWADJ_LO_SMASK,
-				(tmp_ctl << PLL_BWADJ_LO_SHIFT));
-		clrsetbits_le32(keystone_pll_regs[data->pll].reg1,
-				PLL_BWADJ_HI_MASK,
-				(tmp_ctl >> 8));
+	/* Check for Bypass */
+	if (tmp & SECCTL_BYPASS_MASK) {
+		setbits_le32(keystone_pll_regs[data->pll].reg1,
+			     CFG_PLLCTL1_ENSAT_MASK);
 
-		/*
-		 * Set the pll divider (6 bit field) *
-		 * PLLD[5:0] is located in MAINPLLCTL0
-		 */
-		clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
-				PLL_DIV_MASK, plld);
+		bypass_main_pll(data);
 
-		/* Set the OUTPUT DIVIDE (4 bit field) in SECCTL */
-		pllctl_reg_rmw(data->pll, secctl, PLL_CLKOD_SMASK,
-			       (pllod << PLL_CLKOD_SHIFT));
-		wait_for_completion(data);
+		/* Powerdown and powerup Main Pll */
+		pllctl_reg_setbits(data->pll, secctl, SECCTL_BYPASS_MASK);
+		pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLPWRDN_MASK);
+		/* 5 micro sec */
+		sdelay(21000);
+
+		pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN_MASK);
+	} else {
+		bypass_main_pll(data);
+	}
 
-		pllctl_reg_write(data->pll, div1, PLLM_RATIO_DIV1);
-		pllctl_reg_write(data->pll, div2, PLLM_RATIO_DIV2);
-		pllctl_reg_write(data->pll, div3, PLLM_RATIO_DIV3);
-		pllctl_reg_write(data->pll, div4, PLLM_RATIO_DIV4);
-		pllctl_reg_write(data->pll, div5, PLLM_RATIO_DIV5);
+	configure_mult_div(data);
 
-		pllctl_reg_setbits(data->pll, alnctl, 0x1f);
+	/* Program Output Divider */
+	pllctl_reg_rmw(data->pll, secctl, SECCTL_OP_DIV_MASK,
+		       ((pllod << SECCTL_OP_DIV_SHIFT) & SECCTL_OP_DIV_MASK));
 
+	/* Program PLLDIVn */
+	wait_for_completion(data);
+	for (i = 0; i < PLLDIV_MAX; i++) {
+		if (i < 3)
+			offset = pllctl_reg(data->pll, div1) + i;
+		else
+			offset = pllctl_reg(data->pll, div4) + (i - 3);
+
+		if (divn_val[i] != -1) {
+			__raw_writel(divn_val[i] | PLLDIV_ENABLE_MASK, offset);
+			alnctl_val |= BIT(i);
+		}
+	}
+
+	if (alnctl_val) {
+		pllctl_reg_setbits(data->pll, alnctl, alnctl_val);
 		/*
 		 * Set GOSET bit in PLLCMD to initiate the GO operation
 		 * to change the divide
 		 */
-		pllctl_reg_setbits(data->pll, cmd, PLLSTAT_GO);
-		sdelay(1500); /* wait for the phase adj */
+		pllctl_reg_setbits(data->pll, cmd, PLLSTAT_GOSTAT_MASK);
 		wait_for_completion(data);
+	}
 
-		/* Reset PLL */
-		pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST);
-		sdelay(21000);	/* Wait for a minimum of 7 us*/
-		pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST);
-		sdelay(105000);	/* Wait for PLL Lock time (min 50 us) */
+	/* Reset PLL */
+	pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST_MASK);
+	sdelay(21000);	/* Wait for a minimum of 7 us*/
+	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST_MASK);
+	sdelay(105000);	/* Wait for PLL Lock time (min 50 us) */
 
-		pllctl_reg_clrbits(data->pll, secctl, PLLCTL_BYPASS);
+	/* Enable PLL */
+	pllctl_reg_clrbits(data->pll, secctl, SECCTL_BYPASS_MASK);
+	pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN_MASK);
+}
 
-		tmp = pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN);
+void configure_secondary_pll(const struct pll_init_data *data)
+{
+	int pllod = data->pll_od - 1;
 
-#ifndef CONFIG_SOC_K2E
-	} else if (data->pll == TETRIS_PLL) {
-		bwadj = pllm >> 1;
-		/* 1.5 Set PLLCTL0[BYPASS] =1 (enable bypass), */
-		setbits_le32(keystone_pll_regs[data->pll].reg0,  PLLCTL_BYPASS);
-		/*
-		 * Set CHIPMISCCTL1[13] = 0 (enable glitchfree bypass)
-		 * only applicable for Kepler
-		 */
-		clrbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN);
-		/* 2 In PLLCTL1, write PLLRST = 1 (PLL is reset) */
-		setbits_le32(keystone_pll_regs[data->pll].reg1 ,
-			     PLL_PLLRST | PLLCTL_ENSAT);
+	/* Enable Bypass mode */
+	setbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_ENSAT_MASK);
+	setbits_le32(keystone_pll_regs[data->pll].reg0,
+		     CFG_PLLCTL0_BYPASS_MASK);
 
-		/*
-		 * 3 Program PLLM and PLLD in PLLCTL0 register
-		 * 4 Program BWADJ[7:0] in PLLCTL0 and BWADJ[11:8] in
-		 * PLLCTL1 register. BWADJ value must be set
-		 * to ((PLLM + 1) >> 1) – 1)
-		 */
-		tmp = ((bwadj & PLL_BWADJ_LO_MASK) << PLL_BWADJ_LO_SHIFT) |
-			(pllm << 6) |
-			(plld & PLL_DIV_MASK) |
-			(pllod << PLL_CLKOD_SHIFT) | PLLCTL_BYPASS;
-		__raw_writel(tmp, keystone_pll_regs[data->pll].reg0);
+	/* Enable Glitch free bypass for ARM PLL */
+	if (cpu_is_k2hk() && data->pll == TETRIS_PLL)
+		clrbits_le32(KS2_MISC_CTRL, MISC_CTL1_ARM_PLL_EN);
 
-		/* Set BWADJ[11:8] bits */
-		tmp = __raw_readl(keystone_pll_regs[data->pll].reg1);
-		tmp &= ~(PLL_BWADJ_HI_MASK);
-		tmp |= ((bwadj>>8) & PLL_BWADJ_HI_MASK);
-		__raw_writel(tmp, keystone_pll_regs[data->pll].reg1);
-		/*
-		 * 5 Wait for at least 5 us based on the reference
-		 * clock (PLL reset time)
-		 */
-		sdelay(21000);	/* Wait for a minimum of 7 us*/
+	configure_mult_div(data);
 
-		/* 6 In PLLCTL1, write PLLRST = 0 (PLL reset is released) */
-		clrbits_le32(keystone_pll_regs[data->pll].reg1, PLL_PLLRST);
-		/*
-		 * 7 Wait for at least 500 * REFCLK cycles * (PLLD + 1)
-		 * (PLL lock time)
-		 */
-		sdelay(105000);
-		/* 8 disable bypass */
-		clrbits_le32(keystone_pll_regs[data->pll].reg0, PLLCTL_BYPASS);
-		/*
-		 * 9 Set CHIPMISCCTL1[13] = 1 (disable glitchfree bypass)
-		 * only applicable for Kepler
-		 */
-		setbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN);
-#endif
-	} else {
-		setbits_le32(keystone_pll_regs[data->pll].reg1, PLLCTL_ENSAT);
-		/*
-		 * process keeps state of Bypass bit while programming
-		 * all other DDR PLL settings
-		 */
-		tmp = __raw_readl(keystone_pll_regs[data->pll].reg0);
-		tmp &= PLLCTL_BYPASS;	/* clear everything except Bypass */
+	/* Program Output Divider */
+	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+			CFG_PLLCTL0_CLKOD_MASK,
+			(pllod << CFG_PLLCTL0_CLKOD_SHIFT) &
+			CFG_PLLCTL0_CLKOD_MASK);
 
-		/*
-		 * Set the BWADJ[7:0], PLLD[5:0] and PLLM to PLLCTL0,
-		 * bypass disabled
-		 */
-		bwadj = pllm >> 1;
-		tmp |= ((bwadj & PLL_BWADJ_LO_MASK) << PLL_BWADJ_LO_SHIFT) |
-			(pllm << PLL_MULT_SHIFT) |
-			(plld & PLL_DIV_MASK) |
-			(pllod << PLL_CLKOD_SHIFT);
-		__raw_writel(tmp, keystone_pll_regs[data->pll].reg0);
+	/* Reset PLL */
+	setbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_RST_MASK);
+	/* Wait for 5 micro seconds */
+	sdelay(21000);
 
-		/* Set BWADJ[11:8] bits */
-		tmp = __raw_readl(keystone_pll_regs[data->pll].reg1);
-		tmp &= ~(PLL_BWADJ_HI_MASK);
-		tmp |= ((bwadj >> 8) & PLL_BWADJ_HI_MASK);
+	/* Select the Output of PASS PLL as input to PASS */
+	if (data->pll == PASS_PLL)
+		setbits_le32(keystone_pll_regs[data->pll].reg1,
+			     CFG_PLLCTL1_PAPLL_MASK);
 
-		__raw_writel(tmp, keystone_pll_regs[data->pll].reg1);
+	/* Select the Output of ARM PLL as input to ARM */
+	if (data->pll == TETRIS_PLL)
+		setbits_le32(KS2_MISC_CTRL, MISC_CTL1_ARM_PLL_EN);
 
-		/* Reset bit: bit 14 for both DDR3 & PASS PLL */
-		tmp = PLL_PLLRST;
-		/* Set RESET bit = 1 */
-		setbits_le32(keystone_pll_regs[data->pll].reg1, tmp);
-		/* Wait for a minimum of 7 us*/
-		sdelay(21000);
-		/* Clear RESET bit */
-		clrbits_le32(keystone_pll_regs[data->pll].reg1, tmp);
-		sdelay(105000);
+	clrbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_RST_MASK);
+	/* Wait for 500 * REFCLK cucles * (PLLD + 1) */
+	sdelay(105000);
 
-		/* clear BYPASS (Enable PLL Mode) */
-		clrbits_le32(keystone_pll_regs[data->pll].reg0, PLLCTL_BYPASS);
-		sdelay(21000);	/* Wait for a minimum of 7 us*/
-	}
+	/* Switch to PLL mode */
+	clrbits_le32(keystone_pll_regs[data->pll].reg0,
+		     CFG_PLLCTL0_BYPASS_MASK);
+}
+
+void init_pll(const struct pll_init_data *data)
+{
+	if (data->pll == MAIN_PLL)
+		configure_main_pll(data);
+	else
+		configure_secondary_pll(data);
 
 	/*
 	 * This is required to provide a delay between multiple
@@ -257,16 +239,3 @@
 {
 	return get_max_speed((read_efuse_bootrom() >> 16) & 0xffff, dev_speeds);
 }
-
-void pass_pll_pa_clk_enable(void)
-{
-	u32 reg;
-
-	reg = readl(keystone_pll_regs[PASS_PLL].reg1);
-
-	reg |= PLLCTL_PAPLL;
-	writel(reg, keystone_pll_regs[PASS_PLL].reg1);
-
-	/* wait till clock is enabled */
-	sdelay(15000);
-}
diff --git a/arch/arm/mach-keystone/include/mach/clock-k2e.h b/arch/arm/mach-keystone/include/mach/clock-k2e.h
index d013b83..68e15ac 100644
--- a/arch/arm/mach-keystone/include/mach/clock-k2e.h
+++ b/arch/arm/mach-keystone/include/mach/clock-k2e.h
@@ -55,6 +55,7 @@
 	CORE_PLL,
 	PASS_PLL,
 	DDR3_PLL,
+	TETRIS_PLL,
 };
 
 enum {
diff --git a/arch/arm/mach-keystone/include/mach/clock.h b/arch/arm/mach-keystone/include/mach/clock.h
index 9f6cfb2..8d4cad2 100644
--- a/arch/arm/mach-keystone/include/mach/clock.h
+++ b/arch/arm/mach-keystone/include/mach/clock.h
@@ -52,13 +52,13 @@
 extern const struct keystone_pll_regs keystone_pll_regs[];
 extern int dev_speeds[];
 extern int arm_speeds[];
+extern s16 divn_val[];
 
 void init_plls(int num_pll, struct pll_init_data *config);
 void init_pll(const struct pll_init_data *data);
 unsigned long clk_get_rate(unsigned int clk);
 unsigned long clk_round_rate(unsigned int clk, unsigned long hz);
 int clk_set_rate(unsigned int clk, unsigned long hz);
-void pass_pll_pa_clk_enable(void);
 int get_max_dev_speed(void);
 int get_max_arm_speed(void);
 
diff --git a/arch/arm/mach-keystone/include/mach/clock_defs.h b/arch/arm/mach-keystone/include/mach/clock_defs.h
index 85a046b..1c9dc3e 100644
--- a/arch/arm/mach-keystone/include/mach/clock_defs.h
+++ b/arch/arm/mach-keystone/include/mach/clock_defs.h
@@ -69,7 +69,6 @@
 
 #define pll0div_read(N) ((pllctl_reg_read(CORE_PLL, div##N) & 0xff) + 1)
 
-/* PLLCTL Bits */
 #define PLLCTL_BYPASS           BIT(23)
 #define PLL_PLLRST              BIT(14)
 #define PLLCTL_PAPLL            BIT(13)
@@ -102,10 +101,67 @@
 #define PLL_BWADJ_LO_SMASK      (PLL_BWADJ_LO_MASK << PLL_BWADJ_LO_SHIFT)
 #define PLL_BWADJ_HI_MASK       0xf
 
+/* PLLCTL Bits */
+#define PLLCTL_PLLENSRC_SHIF	5
+#define PLLCTL_PLLENSRC_MASK	BIT(5)
+#define PLLCTL_PLLRST_SHIFT	3
+#define PLLCTL_PLLRST_MASK	BIT(3)
+#define PLLCTL_PLLPWRDN_SHIFT	1
+#define PLLCTL_PLLPWRDN_MASK	BIT(1)
+#define PLLCTL_PLLEN_SHIFT	0
+#define PLLCTL_PLLEN_MASK	BIT(0)
+
+/* SECCTL Bits */
+#define SECCTL_BYPASS_SHIFT	23
+#define SECCTL_BYPASS_MASK	BIT(23)
+#define SECCTL_OP_DIV_SHIFT	19
+#define SECCTL_OP_DIV_MASK	(0xf << 19)
+
+/* PLLM Bits */
+#define PLLM_MULT_LO_SHIFT	0
+#define PLLM_MULT_LO_MASK	0x3f
+#define PLLM_MULT_LO_BITS	6
+
+/* PLLDIVn Bits */
+#define PLLDIV_ENABLE_SHIFT	15
+#define PLLDIV_ENABLE_MASK	BIT(15)
+#define PLLDIV_RATIO_SHIFT	0x0
+#define PLLDIV_RATIO_MASK	0xff
+#define PLLDIV_MAX		16
+
+/* PLLCMD Bits */
+#define PLLCMD_GOSET_SHIFT	0
+#define PLLCMD_GOSET_MASK	BIT(0)
+
+/* PLLSTAT Bits */
+#define PLLSTAT_GOSTAT_SHIFT	0
+#define PLLSTAT_GOSTAT_MASK	BIT(0)
+
+/* Device Config PLLCTL0 */
+#define CFG_PLLCTL0_BWADJ_SHIFT		24
+#define CFG_PLLCTL0_BWADJ_MASK		(0xff << 24)
+#define CFG_PLLCTL0_BWADJ_BITS		8
+#define CFG_PLLCTL0_BYPASS_SHIFT	23
+#define CFG_PLLCTL0_BYPASS_MASK		BIT(23)
+#define CFG_PLLCTL0_CLKOD_SHIFT		19
+#define CFG_PLLCTL0_CLKOD_MASK		(0xf << 19)
+#define CFG_PLLCTL0_PLLM_HI_SHIFT	12
+#define CFG_PLLCTL0_PLLM_HI_MASK	(0x7f << 12)
+#define CFG_PLLCTL0_PLLM_SHIFT		6
+#define CFG_PLLCTL0_PLLM_MASK		(0x1fff << 6)
+#define CFG_PLLCTL0_PLLD_SHIFT		0
+#define CFG_PLLCTL0_PLLD_MASK		0x3f
+
+/* Device Config PLLCTL1 */
+#define CFG_PLLCTL1_RST_SHIFT	14
+#define CFG_PLLCTL1_RST_MASK	BIT(14)
+#define CFG_PLLCTL1_PAPLL_SHIFT	13
+#define CFG_PLLCTL1_PAPLL_MASK	BIT(13)
+#define CFG_PLLCTL1_ENSAT_SHIFT	6
+#define CFG_PLLCTL1_ENSAT_MASK	BIT(6)
+#define CFG_PLLCTL1_BWADJ_SHIFT	0
+#define CFG_PLLCTL1_BWADJ_MASK	0xf
+
-#define PLLM_RATIO_DIV1         (PLLDIV_ENABLE | 0x0)
-#define PLLM_RATIO_DIV2         (PLLDIV_ENABLE | 0x0)
-#define PLLM_RATIO_DIV3         (PLLDIV_ENABLE | 0x1)
-#define PLLM_RATIO_DIV4         (PLLDIV_ENABLE | 0x4)
-#define PLLM_RATIO_DIV5         (PLLDIV_ENABLE | 0x17)
+#define MISC_CTL1_ARM_PLL_EN	BIT(13)
 
 #endif  /* _CLOCK_DEFS_H_ */
diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c
index 0cefb34..859a260 100644
--- a/board/ti/ks2_evm/board.c
+++ b/board/ti/ks2_evm/board.c
@@ -80,7 +80,6 @@
 		return -1;
 	if (psc_enable_module(KS2_LPSC_CRYPTO))
 		return -1;
-	pass_pll_pa_clk_enable();
 
 	port_num = get_num_eth_ports();
 
diff --git a/board/ti/ks2_evm/board_k2e.c b/board/ti/ks2_evm/board_k2e.c
index 43dfc48..98acc96 100644
--- a/board/ti/ks2_evm/board_k2e.c
+++ b/board/ti/ks2_evm/board_k2e.c
@@ -36,6 +36,10 @@
 	CORE_PLL_1500,
 };
 
+s16 divn_val[16] = {
+	0, 0, 1, 4, 23, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
+};
+
 static struct pll_init_data pa_pll_config =
 	PASS_PLL_1000;
 
diff --git a/board/ti/ks2_evm/board_k2hk.c b/board/ti/ks2_evm/board_k2hk.c
index ed181f4..cb64934 100644
--- a/board/ti/ks2_evm/board_k2hk.c
+++ b/board/ti/ks2_evm/board_k2hk.c
@@ -35,6 +35,10 @@
 	CORE_PLL_1200,
 };
 
+s16 divn_val[16] = {
+	0, 0, 1, 4, 23, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
+};
+
 static struct pll_init_data tetris_pll_config[] = {
 	TETRIS_PLL_800,
 	TETRIS_PLL_1000,
diff --git a/board/ti/ks2_evm/board_k2l.c b/board/ti/ks2_evm/board_k2l.c
index 729a193..2c433ee 100644
--- a/board/ti/ks2_evm/board_k2l.c
+++ b/board/ti/ks2_evm/board_k2l.c
@@ -31,6 +31,10 @@
 	CORE_PLL_1198,
 };
 
+s16 divn_val[16] = {
+	0, 0, 1, 4, 23, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
+};
+
 static struct pll_init_data tetris_pll_config[] = {
 	TETRIS_PLL_799,
 	TETRIS_PLL_1000,