| /* |
| * linux/include/asm-nds/io.h |
| * |
| * Copyright (C) 1996-2000 Russell King |
| * |
| * Copyright (C) 2011 Andes Technology Corporation |
| * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> |
| * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0 |
| * |
| * Modifications: |
| * 16-Sep-1996 RMK Inlined the inx/outx functions & optimised for both |
| * constant addresses and variable addresses. |
| * 04-Dec-1997 RMK Moved a lot of this stuff to the new architecture |
| * specific IO header files. |
| * 27-Mar-1999 PJB Second parameter of memcpy_toio is const.. |
| * 04-Apr-1999 PJB Added check_signature. |
| * 12-Dec-1999 RMK More cleanups |
| * 18-Jun-2000 RMK Removed virt_to_* and friends definitions |
| */ |
| #ifndef __ASM_NDS_IO_H |
| #define __ASM_NDS_IO_H |
| |
| /* |
| * CAUTION: |
| * - do not implement for NDS32 Arch yet. |
| * - cmd_pci.c, cmd_scsi.c, Lynxkdi.c, usb.c, usb_storage.c, etc... |
| * iinclude asm/io.h |
| */ |
| |
| #ifdef __KERNEL__ |
| |
| #include <linux/types.h> |
| #include <asm/byteorder.h> |
| |
| static inline void sync(void) |
| { |
| } |
| |
| /* |
| * Given a physical address and a length, return a virtual address |
| * that can be used to access the memory range with the caching |
| * properties specified by "flags". |
| */ |
| #define MAP_NOCACHE (0) |
| #define MAP_WRCOMBINE (0) |
| #define MAP_WRBACK (0) |
| #define MAP_WRTHROUGH (0) |
| |
| #ifdef CONFIG_ARCH_MAP_SYSMEM |
| static inline void *map_sysmem(phys_addr_t paddr, unsigned long len) |
| { |
| if(paddr <PHYS_SDRAM_0_SIZE + PHYS_SDRAM_1_SIZE) |
| paddr = paddr | 0x40000000; |
| return (void *)(uintptr_t)paddr; |
| } |
| |
| static inline void *unmap_sysmem(const void *vaddr) |
| { |
| phys_addr_t paddr = (phys_addr_t)vaddr; |
| paddr = paddr & ~0x40000000; |
| return (void *)(uintptr_t)paddr; |
| } |
| |
| static inline phys_addr_t map_to_sysmem(const void *ptr) |
| { |
| return (phys_addr_t)(uintptr_t)ptr; |
| } |
| #endif |
| |
| static inline void * |
| map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) |
| { |
| return (void *)paddr; |
| } |
| |
| /* |
| * Take down a mapping set up by map_physmem(). |
| */ |
| static inline void unmap_physmem(void *vaddr, unsigned long flags) |
| { |
| |
| } |
| |
| static inline phys_addr_t virt_to_phys(void *vaddr) |
| { |
| return (phys_addr_t)(vaddr); |
| } |
| |
| /* |
| * Generic virtual read/write. Note that we don't support half-word |
| * read/writes. We define __arch_*[bl] here, and leave __arch_*w |
| * to the architecture specific code. |
| */ |
| #define __arch_getb(a) (*(unsigned char *)(a)) |
| #define __arch_getw(a) (*(unsigned short *)(a)) |
| #define __arch_getl(a) (*(unsigned int *)(a)) |
| |
| #define __arch_putb(v, a) (*(unsigned char *)(a) = (v)) |
| #define __arch_putw(v, a) (*(unsigned short *)(a) = (v)) |
| #define __arch_putl(v, a) (*(unsigned int *)(a) = (v)) |
| |
| extern void __raw_writesb(unsigned int addr, const void *data, int bytelen); |
| extern void __raw_writesw(unsigned int addr, const void *data, int wordlen); |
| extern void __raw_writesl(unsigned int addr, const void *data, int longlen); |
| |
| extern void __raw_readsb(unsigned int addr, void *data, int bytelen); |
| extern void __raw_readsw(unsigned int addr, void *data, int wordlen); |
| extern void __raw_readsl(unsigned int addr, void *data, int longlen); |
| |
| #define __raw_writeb(v, a) __arch_putb(v, a) |
| #define __raw_writew(v, a) __arch_putw(v, a) |
| #define __raw_writel(v, a) __arch_putl(v, a) |
| |
| #define __raw_readb(a) __arch_getb(a) |
| #define __raw_readw(a) __arch_getw(a) |
| #define __raw_readl(a) __arch_getl(a) |
| |
| /* |
| * TODO: The kernel offers some more advanced versions of barriers, it might |
| * have some advantages to use them instead of the simple one here. |
| */ |
| #define dmb() __asm__ __volatile__ ("" : : : "memory") |
| #define __iormb() dmb() |
| #define __iowmb() dmb() |
| |
| static inline void writeb(unsigned char val, unsigned char *addr) |
| { |
| __iowmb(); |
| __arch_putb(val, addr); |
| } |
| |
| static inline void writew(unsigned short val, unsigned short *addr) |
| { |
| __iowmb(); |
| __arch_putw(val, addr); |
| |
| } |
| |
| static inline void writel(unsigned int val, unsigned int *addr) |
| { |
| __iowmb(); |
| __arch_putl(val, addr); |
| } |
| |
| static inline unsigned char readb(unsigned char *addr) |
| { |
| u8 val; |
| |
| val = __arch_getb(addr); |
| __iormb(); |
| return val; |
| } |
| |
| static inline unsigned short readw(unsigned short *addr) |
| { |
| u16 val; |
| |
| val = __arch_getw(addr); |
| __iormb(); |
| return val; |
| } |
| |
| static inline unsigned int readl(unsigned int *addr) |
| { |
| u32 val; |
| |
| val = __arch_getl(addr); |
| __iormb(); |
| return val; |
| } |
| |
| /* |
| * The compiler seems to be incapable of optimising constants |
| * properly. Spell it out to the compiler in some cases. |
| * These are only valid for small values of "off" (< 1<<12) |
| */ |
| #define __raw_base_writeb(val, base, off) __arch_base_putb(val, base, off) |
| #define __raw_base_writew(val, base, off) __arch_base_putw(val, base, off) |
| #define __raw_base_writel(val, base, off) __arch_base_putl(val, base, off) |
| |
| #define __raw_base_readb(base, off) __arch_base_getb(base, off) |
| #define __raw_base_readw(base, off) __arch_base_getw(base, off) |
| #define __raw_base_readl(base, off) __arch_base_getl(base, off) |
| |
| #define out_arch(type, endian, a, v) __raw_write##type(cpu_to_##endian(v), a) |
| #define in_arch(type, endian, a) endian##_to_cpu(__raw_read##type(a)) |
| |
| #define out_le32(a, v) out_arch(l, le32, a, v) |
| #define out_le16(a, v) out_arch(w, le16, a, v) |
| |
| #define in_le32(a) in_arch(l, le32, a) |
| #define in_le16(a) in_arch(w, le16, a) |
| |
| #define out_be32(a, v) out_arch(l, be32, a, v) |
| #define out_be16(a, v) out_arch(w, be16, a, v) |
| |
| #define in_be32(a) in_arch(l, be32, a) |
| #define in_be16(a) in_arch(w, be16, a) |
| |
| #define out_8(a, v) __raw_writeb(v, a) |
| #define in_8(a) __raw_readb(a) |
| |
| /* |
| * Clear and set bits in one shot. These macros can be used to clear and |
| * set multiple bits in a register using a single call. These macros can |
| * also be used to set a multiple-bit bit pattern using a mask, by |
| * specifying the mask in the 'clear' parameter and the new bit pattern |
| * in the 'set' parameter. |
| */ |
| |
| #define clrbits(type, addr, clear) \ |
| out_##type((addr), in_##type(addr) & ~(clear)) |
| |
| #define setbits(type, addr, set) \ |
| out_##type((addr), in_##type(addr) | (set)) |
| |
| #define clrsetbits(type, addr, clear, set) \ |
| out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) |
| |
| #define clrbits_be32(addr, clear) clrbits(be32, addr, clear) |
| #define setbits_be32(addr, set) setbits(be32, addr, set) |
| #define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) |
| |
| #define clrbits_le32(addr, clear) clrbits(le32, addr, clear) |
| #define setbits_le32(addr, set) setbits(le32, addr, set) |
| #define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) |
| |
| #define clrbits_be16(addr, clear) clrbits(be16, addr, clear) |
| #define setbits_be16(addr, set) setbits(be16, addr, set) |
| #define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) |
| |
| #define clrbits_le16(addr, clear) clrbits(le16, addr, clear) |
| #define setbits_le16(addr, set) setbits(le16, addr, set) |
| #define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) |
| |
| #define clrbits_8(addr, clear) clrbits(8, addr, clear) |
| #define setbits_8(addr, set) setbits(8, addr, set) |
| #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) |
| |
| /* |
| * Now, pick up the machine-defined IO definitions |
| * #include <asm/arch/io.h> |
| */ |
| |
| /* |
| * IO port access primitives |
| * ------------------------- |
| * |
| * The NDS32 doesn't have special IO access instructions just like ARM; |
| * all IO is memory mapped. |
| * Note that these are defined to perform little endian accesses |
| * only. Their primary purpose is to access PCI and ISA peripherals. |
| * |
| * Note that for a big endian machine, this implies that the following |
| * big endian mode connectivity is in place, as described by numerious |
| * ARM documents: |
| * |
| * PCI: D0-D7 D8-D15 D16-D23 D24-D31 |
| * ARM: D24-D31 D16-D23 D8-D15 D0-D7 |
| * |
| * The machine specific io.h include defines __io to translate an "IO" |
| * address to a memory address. |
| * |
| * Note that we prevent GCC re-ordering or caching values in expressions |
| * by introducing sequence points into the in*() definitions. Note that |
| * __raw_* do not guarantee this behaviour. |
| * |
| * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. |
| */ |
| #ifdef __io |
| #define outb(v, p) __raw_writeb(v, __io(p)) |
| #define outw(v, p) __raw_writew(cpu_to_le16(v), __io(p)) |
| #define outl(v, p) __raw_writel(cpu_to_le32(v), __io(p)) |
| |
| #define inb(p) ({ unsigned int __v = __raw_readb(__io(p)); __v; }) |
| #define inw(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(__io(p))); __v; }) |
| #define inl(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(__io(p))); __v; }) |
| |
| #define outsb(p, d, l) writesb(__io(p), d, l) |
| #define outsw(p, d, l) writesw(__io(p), d, l) |
| #define outsl(p, d, l) writesl(__io(p), d, l) |
| |
| #define insb(p, d, l) readsb(__io(p), d, l) |
| #define insw(p, d, l) readsw(__io(p), d, l) |
| #define insl(p, d, l) readsl(__io(p), d, l) |
| |
| static inline void readsb(unsigned int *addr, void * data, int bytelen) |
| { |
| unsigned char *ptr = (unsigned char *)addr; |
| unsigned char *ptr2 = (unsigned char *)data; |
| while (bytelen) { |
| *ptr2 = *ptr; |
| ptr2++; |
| bytelen--; |
| } |
| } |
| |
| static inline void readsw(unsigned int *addr, void * data, int wordlen) |
| { |
| unsigned short *ptr = (unsigned short *)addr; |
| unsigned short *ptr2 = (unsigned short *)data; |
| while (wordlen) { |
| *ptr2 = *ptr; |
| ptr2++; |
| wordlen--; |
| } |
| } |
| |
| static inline void readsl(unsigned int *addr, void * data, int longlen) |
| { |
| unsigned int *ptr = (unsigned int *)addr; |
| unsigned int *ptr2 = (unsigned int *)data; |
| while (longlen) { |
| *ptr2 = *ptr; |
| ptr2++; |
| longlen--; |
| } |
| } |
| static inline void writesb(unsigned int *addr, const void * data, int bytelen) |
| { |
| unsigned char *ptr = (unsigned char *)addr; |
| unsigned char *ptr2 = (unsigned char *)data; |
| while (bytelen) { |
| *ptr = *ptr2; |
| ptr2++; |
| bytelen--; |
| } |
| } |
| static inline void writesw(unsigned int *addr, const void * data, int wordlen) |
| { |
| unsigned short *ptr = (unsigned short *)addr; |
| unsigned short *ptr2 = (unsigned short *)data; |
| while (wordlen) { |
| *ptr = *ptr2; |
| ptr2++; |
| wordlen--; |
| } |
| } |
| static inline void writesl(unsigned int *addr, const void * data, int longlen) |
| { |
| unsigned int *ptr = (unsigned int *)addr; |
| unsigned int *ptr2 = (unsigned int *)data; |
| while (longlen) { |
| *ptr = *ptr2; |
| ptr2++; |
| longlen--; |
| } |
| } |
| #endif |
| |
| #define outb_p(val, port) outb((val), (port)) |
| #define outw_p(val, port) outw((val), (port)) |
| #define outl_p(val, port) outl((val), (port)) |
| #define inb_p(port) inb((port)) |
| #define inw_p(port) inw((port)) |
| #define inl_p(port) inl((port)) |
| |
| #define outsb_p(port, from, len) outsb(port, from, len) |
| #define outsw_p(port, from, len) outsw(port, from, len) |
| #define outsl_p(port, from, len) outsl(port, from, len) |
| #define insb_p(port, to, len) insb(port, to, len) |
| #define insw_p(port, to, len) insw(port, to, len) |
| #define insl_p(port, to, len) insl(port, to, len) |
| |
| /* |
| * DMA-consistent mapping functions. These allocate/free a region of |
| * uncached, unwrite-buffered mapped memory space for use with DMA |
| * devices. This is the "generic" version. The PCI specific version |
| * is in pci.h |
| */ |
| extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle); |
| extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle); |
| extern void consistent_sync(void *vaddr, size_t size, int rw); |
| |
| /* |
| * String version of IO memory access ops: |
| */ |
| extern void _memcpy_fromio(void *, unsigned long, size_t); |
| extern void _memcpy_toio(unsigned long, const void *, size_t); |
| extern void _memset_io(unsigned long, int, size_t); |
| |
| extern void __readwrite_bug(const char *fn); |
| |
| /* |
| * If this architecture has PCI memory IO, then define the read/write |
| * macros. These should only be used with the cookie passed from |
| * ioremap. |
| */ |
| #ifdef __mem_pci |
| |
| #define readb(c) ({ unsigned int __v = \ |
| __raw_readb(__mem_pci(c)); __v; }) |
| #define readw(c) ({ unsigned int __v = \ |
| le16_to_cpu(__raw_readw(__mem_pci(c))); __v; }) |
| #define readl(c) ({ unsigned int __v = \ |
| le32_to_cpu(__raw_readl(__mem_pci(c))); __v; }) |
| |
| #define writeb(v, c) __raw_writeb(v, __mem_pci(c)) |
| #define writew(v, c) __raw_writew(cpu_to_le16(v), __mem_pci(c)) |
| #define writel(v, c) __raw_writel(cpu_to_le32(v), __mem_pci(c)) |
| |
| #define memset_io(c, v, l) _memset_io(__mem_pci(c), (v), (l)) |
| #define memcpy_fromio(a, c, l) _memcpy_fromio((a), __mem_pci(c), (l)) |
| #define memcpy_toio(c, a, l) _memcpy_toio(__mem_pci(c), (a), (l)) |
| |
| #define eth_io_copy_and_sum(s, c, l, b) \ |
| eth_copy_and_sum((s), __mem_pci(c), (l), (b)) |
| |
| static inline int |
| check_signature(unsigned long io_addr, const unsigned char *signature, |
| int length) |
| { |
| int retval = 0; |
| do { |
| if (readb(io_addr) != *signature) |
| goto out; |
| io_addr++; |
| signature++; |
| length--; |
| } while (length); |
| retval = 1; |
| out: |
| return retval; |
| } |
| #endif /* __mem_pci */ |
| |
| /* |
| * If this architecture has ISA IO, then define the isa_read/isa_write |
| * macros. |
| */ |
| #ifdef __mem_isa |
| |
| #define isa_readb(addr) __raw_readb(__mem_isa(addr)) |
| #define isa_readw(addr) __raw_readw(__mem_isa(addr)) |
| #define isa_readl(addr) __raw_readl(__mem_isa(addr)) |
| #define isa_writeb(val, addr) __raw_writeb(val, __mem_isa(addr)) |
| #define isa_writew(val, addr) __raw_writew(val, __mem_isa(addr)) |
| #define isa_writel(val, addr) __raw_writel(val, __mem_isa(addr)) |
| #define isa_memset_io(a, b, c) _memset_io(__mem_isa(a), (b), (c)) |
| #define isa_memcpy_fromio(a, b, c) _memcpy_fromio((a), __mem_isa(b), (c)) |
| #define isa_memcpy_toio(a, b, c) _memcpy_toio(__mem_isa((a)), (b), (c)) |
| |
| #define isa_eth_io_copy_and_sum(a, b, c, d) \ |
| eth_copy_and_sum((a), __mem_isa(b), (c), (d)) |
| |
| static inline int |
| isa_check_signature(unsigned long io_addr, const unsigned char *signature, |
| int length) |
| { |
| int retval = 0; |
| do { |
| if (isa_readb(io_addr) != *signature) |
| goto out; |
| io_addr++; |
| signature++; |
| length--; |
| } while (length); |
| retval = 1; |
| out: |
| return retval; |
| } |
| |
| #else /* __mem_isa */ |
| |
| #define isa_readb(addr) (__readwrite_bug("isa_readb"), 0) |
| #define isa_readw(addr) (__readwrite_bug("isa_readw"), 0) |
| #define isa_readl(addr) (__readwrite_bug("isa_readl"), 0) |
| #define isa_writeb(val, addr) __readwrite_bug("isa_writeb") |
| #define isa_writew(val, addr) __readwrite_bug("isa_writew") |
| #define isa_writel(val, addr) __readwrite_bug("isa_writel") |
| #define isa_memset_io(a, b, c) __readwrite_bug("isa_memset_io") |
| #define isa_memcpy_fromio(a, b, c) __readwrite_bug("isa_memcpy_fromio") |
| #define isa_memcpy_toio(a, b, c) __readwrite_bug("isa_memcpy_toio") |
| |
| #define isa_eth_io_copy_and_sum(a, b, c, d) \ |
| __readwrite_bug("isa_eth_io_copy_and_sum") |
| |
| #define isa_check_signature(io, sig, len) (0) |
| |
| #endif /* __mem_isa */ |
| #endif /* __KERNEL__ */ |
| #endif /* __ASM_NDS_IO_H */ |