Convert CONFIG_FLASH_SPANSION_S29WS_N et al to Kconfig
This converts the following to Kconfig:
CONFIG_FLASH_SPANSION_S29WS_N
CONFIG_FLASH_VERIFY
CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
CONFIG_FSL_ISBC_KEY_EXT
CONFIG_FSL_TRUST_ARCH_v1
CONFIG_FSL_SDHC_V2_3
CONFIG_MAX_DSP_CPUS
CONFIG_MIU_2BIT_INTERLEAVED
CONFIG_SERIAL_BOOT
CONFIG_SPI_BOOTING
CONFIG_X86EMU_RAW_IO
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 04ae456..af45ef0 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -119,6 +119,13 @@
bool "Enable displaying empty sectors in flash info"
depends on FLASH_CFI_DRIVER
+config FLASH_SPANSION_S29WS_N
+ bool "Non-standard s29ws-n MirrorBit flash"
+ depends on FLASH_CFI_DRIVER
+ help
+ Enable this if the s29ws-n MirrorBit flash has non-standard addresses
+ for buffered write commands.
+
config FLASH_CFI_MTD
bool "Enable CFI MTD driver"
depends on FLASH_CFI_DRIVER
@@ -156,6 +163,18 @@
If the variable flashchecksum is set in the environment, perform a CRC
of the flash and print the value to console.
+config FLASH_VERIFY
+ bool "Compare writes to NOR flash with source location"
+ depends on MTD_NOR_FLASH
+ help
+ If enabled, the content of the flash (destination) is compared
+ against the source after the write operation. An error message will
+ be printed when the contents are not identical. Please note that
+ this option is useless in nearly all cases, since such flash
+ programming errors usually are detected earlier while
+ unprotecting/erasing/programming. Please only enable this option if
+ you really know what you are doing.
+
config ALTERA_QSPI
bool "Altera Generic Quad SPI Controller"
depends on DM_MTD