diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a7b76f4..ce8ba99 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -33,11 +33,11 @@
 	  used to preserve the bad block marker in the OOB area.
 
 config NAND_VF610_NFC
-	bool "Support for Freescale NFC for VF610/MPC5125"
+	bool "Support for Freescale NFC for VF610"
 	select SYS_NAND_SELF_INIT
 	help
 	  Enables support for NAND Flash Controller on some Freescale
-	  processors like the VF610, MPC5125, MCF54418 or Kinetis K70.
+	  processors like the VF610, MCF54418 or Kinetis K70.
 	  The driver supports a maximum 2k page size. The driver
 	  currently does not support hardware ECC.
 
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 5d5f9f5..c3d4a99 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -53,7 +53,6 @@
 obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
 obj-$(CONFIG_NAND_LPC32XX_MLC) += lpc32xx_nand_mlc.o
 obj-$(CONFIG_NAND_LPC32XX_SLC) += lpc32xx_nand_slc.o
-obj-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o
 obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o
 obj-$(CONFIG_NAND_MXC) += mxc_nand.o
 obj-$(CONFIG_NAND_MXS) += mxs_nand.o
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
deleted file mode 100644
index 7faabdd..0000000
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ /dev/null
@@ -1,656 +0,0 @@
-/*
- * Copyright 2004-2008 Freescale Semiconductor, Inc.
- * Copyright 2009 Semihalf.
- * (C) Copyright 2009 Stefan Roese <sr@denx.de>
- *
- * Based on original driver from Freescale Semiconductor
- * written by John Rigby <jrigby@freescale.com> on basis
- * of drivers/mtd/nand/mxc_nand.c. Reworked and extended
- * Piotr Ziecik <kosmo@semihalf.com>.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <malloc.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/compat.h>
-
-#include <linux/errno.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <nand.h>
-
-#define DRV_NAME		"mpc5121_nfc"
-
-/* Timeouts */
-#define NFC_RESET_TIMEOUT	1000	/* 1 ms */
-#define NFC_TIMEOUT		2000	/* 2000 us */
-
-/* Addresses for NFC MAIN RAM BUFFER areas */
-#define NFC_MAIN_AREA(n)	((n) *  0x200)
-
-/* Addresses for NFC SPARE BUFFER areas */
-#define NFC_SPARE_BUFFERS	8
-#define NFC_SPARE_LEN		0x40
-#define NFC_SPARE_AREA(n)	(0x1000 + ((n) * NFC_SPARE_LEN))
-
-/* MPC5121 NFC registers */
-#define NFC_BUF_ADDR		0x1E04
-#define NFC_FLASH_ADDR		0x1E06
-#define NFC_FLASH_CMD		0x1E08
-#define NFC_CONFIG		0x1E0A
-#define NFC_ECC_STATUS1		0x1E0C
-#define NFC_ECC_STATUS2		0x1E0E
-#define NFC_SPAS		0x1E10
-#define NFC_WRPROT		0x1E12
-#define NFC_NF_WRPRST		0x1E18
-#define NFC_CONFIG1		0x1E1A
-#define NFC_CONFIG2		0x1E1C
-#define NFC_UNLOCKSTART_BLK0	0x1E20
-#define NFC_UNLOCKEND_BLK0	0x1E22
-#define NFC_UNLOCKSTART_BLK1	0x1E24
-#define NFC_UNLOCKEND_BLK1	0x1E26
-#define NFC_UNLOCKSTART_BLK2	0x1E28
-#define NFC_UNLOCKEND_BLK2	0x1E2A
-#define NFC_UNLOCKSTART_BLK3	0x1E2C
-#define NFC_UNLOCKEND_BLK3	0x1E2E
-
-/* Bit Definitions: NFC_BUF_ADDR */
-#define NFC_RBA_MASK		(7 << 0)
-#define NFC_ACTIVE_CS_SHIFT	5
-#define NFC_ACTIVE_CS_MASK	(3 << NFC_ACTIVE_CS_SHIFT)
-
-/* Bit Definitions: NFC_CONFIG */
-#define NFC_BLS_UNLOCKED	(1 << 1)
-
-/* Bit Definitions: NFC_CONFIG1 */
-#define NFC_ECC_4BIT		(1 << 0)
-#define NFC_FULL_PAGE_DMA	(1 << 1)
-#define NFC_SPARE_ONLY		(1 << 2)
-#define NFC_ECC_ENABLE		(1 << 3)
-#define NFC_INT_MASK		(1 << 4)
-#define NFC_BIG_ENDIAN		(1 << 5)
-#define NFC_RESET		(1 << 6)
-#define NFC_CE			(1 << 7)
-#define NFC_ONE_CYCLE		(1 << 8)
-#define NFC_PPB_32		(0 << 9)
-#define NFC_PPB_64		(1 << 9)
-#define NFC_PPB_128		(2 << 9)
-#define NFC_PPB_256		(3 << 9)
-#define NFC_PPB_MASK		(3 << 9)
-#define NFC_FULL_PAGE_INT	(1 << 11)
-
-/* Bit Definitions: NFC_CONFIG2 */
-#define NFC_COMMAND		(1 << 0)
-#define NFC_ADDRESS		(1 << 1)
-#define NFC_INPUT		(1 << 2)
-#define NFC_OUTPUT		(1 << 3)
-#define NFC_ID			(1 << 4)
-#define NFC_STATUS		(1 << 5)
-#define NFC_CMD_FAIL		(1 << 15)
-#define NFC_INT			(1 << 15)
-
-/* Bit Definitions: NFC_WRPROT */
-#define NFC_WPC_LOCK_TIGHT	(1 << 0)
-#define NFC_WPC_LOCK		(1 << 1)
-#define NFC_WPC_UNLOCK		(1 << 2)
-
-struct mpc5121_nfc_prv {
-	struct nand_chip chip;
-	int irq;
-	void __iomem *regs;
-	struct clk *clk;
-	uint column;
-	int spareonly;
-	int chipsel;
-};
-
-int mpc5121_nfc_chip = 0;
-
-static void mpc5121_nfc_done(struct mtd_info *mtd);
-
-/* Read NFC register */
-static inline u16 nfc_read(struct mtd_info *mtd, uint reg)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct mpc5121_nfc_prv *prv = nand_get_controller_data(chip);
-
-	return in_be16(prv->regs + reg);
-}
-
-/* Write NFC register */
-static inline void nfc_write(struct mtd_info *mtd, uint reg, u16 val)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct mpc5121_nfc_prv *prv = nand_get_controller_data(chip);
-
-	out_be16(prv->regs + reg, val);
-}
-
-/* Set bits in NFC register */
-static inline void nfc_set(struct mtd_info *mtd, uint reg, u16 bits)
-{
-	nfc_write(mtd, reg, nfc_read(mtd, reg) | bits);
-}
-
-/* Clear bits in NFC register */
-static inline void nfc_clear(struct mtd_info *mtd, uint reg, u16 bits)
-{
-	nfc_write(mtd, reg, nfc_read(mtd, reg) & ~bits);
-}
-
-/* Invoke address cycle */
-static inline void mpc5121_nfc_send_addr(struct mtd_info *mtd, u16 addr)
-{
-	nfc_write(mtd, NFC_FLASH_ADDR, addr);
-	nfc_write(mtd, NFC_CONFIG2, NFC_ADDRESS);
-	mpc5121_nfc_done(mtd);
-}
-
-/* Invoke command cycle */
-static inline void mpc5121_nfc_send_cmd(struct mtd_info *mtd, u16 cmd)
-{
-	nfc_write(mtd, NFC_FLASH_CMD, cmd);
-	nfc_write(mtd, NFC_CONFIG2, NFC_COMMAND);
-	mpc5121_nfc_done(mtd);
-}
-
-/* Send data from NFC buffers to NAND flash */
-static inline void mpc5121_nfc_send_prog_page(struct mtd_info *mtd)
-{
-	nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
-	nfc_write(mtd, NFC_CONFIG2, NFC_INPUT);
-	mpc5121_nfc_done(mtd);
-}
-
-/* Receive data from NAND flash */
-static inline void mpc5121_nfc_send_read_page(struct mtd_info *mtd)
-{
-	nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
-	nfc_write(mtd, NFC_CONFIG2, NFC_OUTPUT);
-	mpc5121_nfc_done(mtd);
-}
-
-/* Receive ID from NAND flash */
-static inline void mpc5121_nfc_send_read_id(struct mtd_info *mtd)
-{
-	nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
-	nfc_write(mtd, NFC_CONFIG2, NFC_ID);
-	mpc5121_nfc_done(mtd);
-}
-
-/* Receive status from NAND flash */
-static inline void mpc5121_nfc_send_read_status(struct mtd_info *mtd)
-{
-	nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
-	nfc_write(mtd, NFC_CONFIG2, NFC_STATUS);
-	mpc5121_nfc_done(mtd);
-}
-
-static void mpc5121_nfc_done(struct mtd_info *mtd)
-{
-	int max_retries = NFC_TIMEOUT;
-
-	while (1) {
-		max_retries--;
-		if (nfc_read(mtd, NFC_CONFIG2) & NFC_INT)
-			break;
-		udelay(1);
-	}
-
-	if (max_retries <= 0)
-		printk(KERN_WARNING DRV_NAME
-		       ": Timeout while waiting for completion.\n");
-}
-
-/* Do address cycle(s) */
-static void mpc5121_nfc_addr_cycle(struct mtd_info *mtd, int column, int page)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	u32 pagemask = chip->pagemask;
-
-	if (column != -1) {
-		mpc5121_nfc_send_addr(mtd, column);
-		if (mtd->writesize > 512)
-			mpc5121_nfc_send_addr(mtd, column >> 8);
-	}
-
-	if (page != -1) {
-		do {
-			mpc5121_nfc_send_addr(mtd, page & 0xFF);
-			page >>= 8;
-			pagemask >>= 8;
-		} while (pagemask);
-	}
-}
-
-/* Control chip select signals */
-
-/*
- * Selecting the active device:
- *
- * This is different than the linux version. Switching between chips
- * is done via board_nand_select_device(). The Linux select_chip
- * function used here in U-Boot has only 2 valid chip numbers:
- * 	0 select
- * 	-1 deselect
- */
-
-/*
- * Implement it as a weak default, so that boards with a specific
- * chip-select routine can use their own function.
- */
-void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
-{
-	if (chip < 0) {
-		nfc_clear(mtd, NFC_CONFIG1, NFC_CE);
-		return;
-	}
-
-	nfc_clear(mtd, NFC_BUF_ADDR, NFC_ACTIVE_CS_MASK);
-	nfc_set(mtd, NFC_BUF_ADDR, (chip << NFC_ACTIVE_CS_SHIFT) &
-		NFC_ACTIVE_CS_MASK);
-	nfc_set(mtd, NFC_CONFIG1, NFC_CE);
-}
-void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
-	__attribute__((weak, alias("__mpc5121_nfc_select_chip")));
-
-void board_nand_select_device(struct nand_chip *nand, int chip)
-{
-	/*
-	 * Only save this chip number in global variable here. This
-	 * will be used later in mpc5121_nfc_select_chip().
-	 */
-	mpc5121_nfc_chip = chip;
-}
-
-/* Read NAND Ready/Busy signal */
-static int mpc5121_nfc_dev_ready(struct mtd_info *mtd)
-{
-	/*
-	 * NFC handles ready/busy signal internally. Therefore, this function
-	 * always returns status as ready.
-	 */
-	return 1;
-}
-
-/* Write command to NAND flash */
-static void mpc5121_nfc_command(struct mtd_info *mtd, unsigned command,
-				int column, int page)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct mpc5121_nfc_prv *prv = nand_get_controller_data(chip);
-
-	prv->column = (column >= 0) ? column : 0;
-	prv->spareonly = 0;
-
-	switch (command) {
-	case NAND_CMD_PAGEPROG:
-		mpc5121_nfc_send_prog_page(mtd);
-		break;
-		/*
-		 * NFC does not support sub-page reads and writes,
-		 * so emulate them using full page transfers.
-		 */
-	case NAND_CMD_READ0:
-		column = 0;
-		break;
-
-	case NAND_CMD_READ1:
-		prv->column += 256;
-		command = NAND_CMD_READ0;
-		column = 0;
-		break;
-
-	case NAND_CMD_READOOB:
-		prv->spareonly = 1;
-		command = NAND_CMD_READ0;
-		column = 0;
-		break;
-
-	case NAND_CMD_SEQIN:
-		mpc5121_nfc_command(mtd, NAND_CMD_READ0, column, page);
-		column = 0;
-		break;
-
-	case NAND_CMD_ERASE1:
-	case NAND_CMD_ERASE2:
-	case NAND_CMD_READID:
-	case NAND_CMD_STATUS:
-	case NAND_CMD_RESET:
-		break;
-
-	default:
-		return;
-	}
-
-	mpc5121_nfc_send_cmd(mtd, command);
-	mpc5121_nfc_addr_cycle(mtd, column, page);
-
-	switch (command) {
-	case NAND_CMD_READ0:
-		if (mtd->writesize > 512)
-			mpc5121_nfc_send_cmd(mtd, NAND_CMD_READSTART);
-		mpc5121_nfc_send_read_page(mtd);
-		break;
-
-	case NAND_CMD_READID:
-		mpc5121_nfc_send_read_id(mtd);
-		break;
-
-	case NAND_CMD_STATUS:
-		mpc5121_nfc_send_read_status(mtd);
-		if (chip->options & NAND_BUSWIDTH_16)
-			prv->column = 1;
-		else
-			prv->column = 0;
-		break;
-	}
-}
-
-/* Copy data from/to NFC spare buffers. */
-static void mpc5121_nfc_copy_spare(struct mtd_info *mtd, uint offset,
-				   u8 * buffer, uint size, int wr)
-{
-	struct nand_chip *nand = mtd_to_nand(mtd);
-	struct mpc5121_nfc_prv *prv = nand_get_controller_data(nand);
-	uint o, s, sbsize, blksize;
-
-	/*
-	 * NAND spare area is available through NFC spare buffers.
-	 * The NFC divides spare area into (page_size / 512) chunks.
-	 * Each chunk is placed into separate spare memory area, using
-	 * first (spare_size / num_of_chunks) bytes of the buffer.
-	 *
-	 * For NAND device in which the spare area is not divided fully
-	 * by the number of chunks, number of used bytes in each spare
-	 * buffer is rounded down to the nearest even number of bytes,
-	 * and all remaining bytes are added to the last used spare area.
-	 *
-	 * For more information read section 26.6.10 of MPC5121e
-	 * Microcontroller Reference Manual, Rev. 3.
-	 */
-
-	/* Calculate number of valid bytes in each spare buffer */
-	sbsize = (mtd->oobsize / (mtd->writesize / 512)) & ~1;
-
-	while (size) {
-		/* Calculate spare buffer number */
-		s = offset / sbsize;
-		if (s > NFC_SPARE_BUFFERS - 1)
-			s = NFC_SPARE_BUFFERS - 1;
-
-		/*
-		 * Calculate offset to requested data block in selected spare
-		 * buffer and its size.
-		 */
-		o = offset - (s * sbsize);
-		blksize = min(sbsize - o, size);
-
-		if (wr)
-			memcpy_toio(prv->regs + NFC_SPARE_AREA(s) + o,
-				    buffer, blksize);
-		else
-			memcpy_fromio(buffer,
-				      prv->regs + NFC_SPARE_AREA(s) + o,
-				      blksize);
-
-		buffer += blksize;
-		offset += blksize;
-		size -= blksize;
-	};
-}
-
-/* Copy data from/to NFC main and spare buffers */
-static void mpc5121_nfc_buf_copy(struct mtd_info *mtd, u_char * buf, int len,
-				 int wr)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct mpc5121_nfc_prv *prv = nand_get_controller_data(chip);
-	uint c = prv->column;
-	uint l;
-
-	/* Handle spare area access */
-	if (prv->spareonly || c >= mtd->writesize) {
-		/* Calculate offset from beginning of spare area */
-		if (c >= mtd->writesize)
-			c -= mtd->writesize;
-
-		prv->column += len;
-		mpc5121_nfc_copy_spare(mtd, c, buf, len, wr);
-		return;
-	}
-
-	/*
-	 * Handle main area access - limit copy length to prevent
-	 * crossing main/spare boundary.
-	 */
-	l = min((uint) len, mtd->writesize - c);
-	prv->column += l;
-
-	if (wr)
-		memcpy_toio(prv->regs + NFC_MAIN_AREA(0) + c, buf, l);
-	else
-		memcpy_fromio(buf, prv->regs + NFC_MAIN_AREA(0) + c, l);
-
-	/* Handle crossing main/spare boundary */
-	if (l != len) {
-		buf += l;
-		len -= l;
-		mpc5121_nfc_buf_copy(mtd, buf, len, wr);
-	}
-}
-
-/* Read data from NFC buffers */
-static void mpc5121_nfc_read_buf(struct mtd_info *mtd, u_char * buf, int len)
-{
-	mpc5121_nfc_buf_copy(mtd, buf, len, 0);
-}
-
-/* Write data to NFC buffers */
-static void mpc5121_nfc_write_buf(struct mtd_info *mtd,
-				  const u_char * buf, int len)
-{
-	mpc5121_nfc_buf_copy(mtd, (u_char *) buf, len, 1);
-}
-
-/* Read byte from NFC buffers */
-static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd)
-{
-	u8 tmp;
-
-	mpc5121_nfc_read_buf(mtd, &tmp, sizeof(tmp));
-
-	return tmp;
-}
-
-/* Read word from NFC buffers */
-static u16 mpc5121_nfc_read_word(struct mtd_info *mtd)
-{
-	u16 tmp;
-
-	mpc5121_nfc_read_buf(mtd, (u_char *) & tmp, sizeof(tmp));
-
-	return tmp;
-}
-
-/*
- * Read NFC configuration from Reset Config Word
- *
- * NFC is configured during reset in basis of information stored
- * in Reset Config Word. There is no other way to set NAND block
- * size, spare size and bus width.
- */
-static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
-{
-	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	uint rcw_pagesize = 0;
-	uint rcw_sparesize = 0;
-	uint rcw_width;
-	uint rcwh;
-	uint romloc, ps;
-
-	rcwh = in_be32(&(im->reset.rcwh));
-
-	/* Bit 6: NFC bus width */
-	rcw_width = ((rcwh >> 6) & 0x1) ? 2 : 1;
-
-	/* Bit 7: NFC Page/Spare size */
-	ps = (rcwh >> 7) & 0x1;
-
-	/* Bits [22:21]: ROM Location */
-	romloc = (rcwh >> 21) & 0x3;
-
-	/* Decode RCW bits */
-	switch ((ps << 2) | romloc) {
-	case 0x00:
-	case 0x01:
-		rcw_pagesize = 512;
-		rcw_sparesize = 16;
-		break;
-	case 0x02:
-	case 0x03:
-		rcw_pagesize = 4096;
-		rcw_sparesize = 128;
-		break;
-	case 0x04:
-	case 0x05:
-		rcw_pagesize = 2048;
-		rcw_sparesize = 64;
-		break;
-	case 0x06:
-	case 0x07:
-		rcw_pagesize = 4096;
-		rcw_sparesize = 218;
-		break;
-	}
-
-	mtd->writesize = rcw_pagesize;
-	mtd->oobsize = rcw_sparesize;
-	if (rcw_width == 2)
-		chip->options |= NAND_BUSWIDTH_16;
-
-	debug(KERN_NOTICE DRV_NAME ": Configured for "
-	      "%u-bit NAND, page size %u with %u spare.\n",
-	      rcw_width * 8, rcw_pagesize, rcw_sparesize);
-	return 0;
-}
-
-int board_nand_init(struct nand_chip *chip)
-{
-	struct mpc5121_nfc_prv *prv;
-	struct mtd_info *mtd;
-	int resettime = 0;
-	int retval = 0;
-	int rev;
-
-	/*
-	 * Check SoC revision. This driver supports only NFC
-	 * in MPC5121 revision 2.
-	 */
-	rev = (mfspr(SPRN_SVR) >> 4) & 0xF;
-	if (rev != 2) {
-		printk(KERN_ERR DRV_NAME
-		       ": SoC revision %u is not supported!\n", rev);
-		return -ENXIO;
-	}
-
-	prv = malloc(sizeof(*prv));
-	if (!prv) {
-		printk(KERN_ERR DRV_NAME ": Memory exhausted!\n");
-		return -ENOMEM;
-	}
-
-	mtd = &chip->mtd;
-	nand_set_controller_data(chip, prv);
-
-	/* Read NFC configuration from Reset Config Word */
-	retval = mpc5121_nfc_read_hw_config(mtd);
-	if (retval) {
-		printk(KERN_ERR DRV_NAME ": Unable to read NFC config!\n");
-		return retval;
-	}
-
-	prv->regs = (void __iomem *)CONFIG_SYS_NAND_BASE;
-	chip->dev_ready = mpc5121_nfc_dev_ready;
-	chip->cmdfunc = mpc5121_nfc_command;
-	chip->read_byte = mpc5121_nfc_read_byte;
-	chip->read_word = mpc5121_nfc_read_word;
-	chip->read_buf = mpc5121_nfc_read_buf;
-	chip->write_buf = mpc5121_nfc_write_buf;
-	chip->select_chip = mpc5121_nfc_select_chip;
-	chip->bbt_options = NAND_BBT_USE_FLASH;
-	chip->ecc.mode = NAND_ECC_SOFT;
-
-	/* Reset NAND Flash controller */
-	nfc_set(mtd, NFC_CONFIG1, NFC_RESET);
-	while (nfc_read(mtd, NFC_CONFIG1) & NFC_RESET) {
-		if (resettime++ >= NFC_RESET_TIMEOUT) {
-			printk(KERN_ERR DRV_NAME
-			       ": Timeout while resetting NFC!\n");
-			retval = -EINVAL;
-			goto error;
-		}
-
-		udelay(1);
-	}
-
-	/* Enable write to NFC memory */
-	nfc_write(mtd, NFC_CONFIG, NFC_BLS_UNLOCKED);
-
-	/* Enable write to all NAND pages */
-	nfc_write(mtd, NFC_UNLOCKSTART_BLK0, 0x0000);
-	nfc_write(mtd, NFC_UNLOCKEND_BLK0, 0xFFFF);
-	nfc_write(mtd, NFC_WRPROT, NFC_WPC_UNLOCK);
-
-	/*
-	 * Setup NFC:
-	 *      - Big Endian transfers,
-	 *      - Interrupt after full page read/write.
-	 */
-	nfc_write(mtd, NFC_CONFIG1, NFC_BIG_ENDIAN | NFC_INT_MASK |
-		  NFC_FULL_PAGE_INT);
-
-	/* Set spare area size */
-	nfc_write(mtd, NFC_SPAS, mtd->oobsize >> 1);
-
-	/* Detect NAND chips */
-	if (nand_scan(mtd, 1)) {
-		printk(KERN_ERR DRV_NAME ": NAND Flash not found !\n");
-		retval = -ENXIO;
-		goto error;
-	}
-
-	/* Set erase block size */
-	switch (mtd->erasesize / mtd->writesize) {
-	case 32:
-		nfc_set(mtd, NFC_CONFIG1, NFC_PPB_32);
-		break;
-
-	case 64:
-		nfc_set(mtd, NFC_CONFIG1, NFC_PPB_64);
-		break;
-
-	case 128:
-		nfc_set(mtd, NFC_CONFIG1, NFC_PPB_128);
-		break;
-
-	case 256:
-		nfc_set(mtd, NFC_CONFIG1, NFC_PPB_256);
-		break;
-
-	default:
-		printk(KERN_ERR DRV_NAME ": Unsupported NAND flash!\n");
-		retval = -ENXIO;
-		goto error;
-	}
-
-	return 0;
-error:
-	return retval;
-}