ARM: OMAP4+: Add support for dynamically selecting OPPs
It can be expected that different paper spins of a SoC can have
different definitions for OPP and can have their own constraints
on the boot up OPP for each voltage rail. In order to have this
flexibility, add support for dynamically selecting the OPP voltage
based on the board to handle any such exceptions.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/mach-omap2/omap5/hw_data.c b/arch/arm/mach-omap2/omap5/hw_data.c
index 02f086b..c85c71a 100644
--- a/arch/arm/mach-omap2/omap5/hw_data.c
+++ b/arch/arm/mach-omap2/omap5/hw_data.c
@@ -337,30 +337,30 @@
};
struct vcores_data omap5430_volts = {
- .mpu.value = VDD_MPU,
+ .mpu.value[OPP_NOM] = VDD_MPU,
.mpu.addr = SMPS_REG_ADDR_12_MPU,
.mpu.pmic = &palmas,
- .core.value = VDD_CORE,
+ .core.value[OPP_NOM] = VDD_CORE,
.core.addr = SMPS_REG_ADDR_8_CORE,
.core.pmic = &palmas,
- .mm.value = VDD_MM,
+ .mm.value[OPP_NOM] = VDD_MM,
.mm.addr = SMPS_REG_ADDR_45_IVA,
.mm.pmic = &palmas,
};
struct vcores_data omap5430_volts_es2 = {
- .mpu.value = VDD_MPU_ES2,
+ .mpu.value[OPP_NOM] = VDD_MPU_ES2,
.mpu.addr = SMPS_REG_ADDR_12_MPU,
.mpu.pmic = &palmas,
.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
- .core.value = VDD_CORE_ES2,
+ .core.value[OPP_NOM] = VDD_CORE_ES2,
.core.addr = SMPS_REG_ADDR_8_CORE,
.core.pmic = &palmas,
- .mm.value = VDD_MM_ES2,
+ .mm.value[OPP_NOM] = VDD_MM_ES2,
.mm.addr = SMPS_REG_ADDR_45_IVA,
.mm.pmic = &palmas,
.mm.abb_tx_done_mask = OMAP_ABB_MM_TXDONE_MASK,