diff --git a/arch/arm/include/asm/arch-meson/gx.h b/arch/arm/include/asm/arch-meson/gx.h
new file mode 100644
index 0000000..03fb6b0
--- /dev/null
+++ b/arch/arm/include/asm/arch-meson/gx.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 - Beniamino Galvani <b.galvani@gmail.com>
+ */
+
+#ifndef __GX_H__
+#define __GX_H__
+
+#define GX_FIRMWARE_MEM_SIZE	0x1000000
+
+#define GX_AOBUS_BASE		0xc8100000
+#define GX_PERIPHS_BASE	0xc8834400
+#define GX_HIU_BASE		0xc883c000
+#define GX_ETH_BASE		0xc9410000
+
+/* Always-On Peripherals registers */
+#define GX_AO_ADDR(off)	(GX_AOBUS_BASE + ((off) << 2))
+
+#define GX_AO_SEC_GP_CFG0	GX_AO_ADDR(0x90)
+#define GX_AO_SEC_GP_CFG3	GX_AO_ADDR(0x93)
+#define GX_AO_SEC_GP_CFG4	GX_AO_ADDR(0x94)
+#define GX_AO_SEC_GP_CFG5	GX_AO_ADDR(0x95)
+
+#define GX_AO_MEM_SIZE_MASK	0xFFFF0000
+#define GX_AO_MEM_SIZE_SHIFT	16
+#define GX_AO_BL31_RSVMEM_SIZE_MASK	0xFFFF0000
+#define GX_AO_BL31_RSVMEM_SIZE_SHIFT	16
+#define GX_AO_BL32_RSVMEM_SIZE_MASK	0xFFFF
+
+/* Peripherals registers */
+#define GX_PERIPHS_ADDR(off)	(GX_PERIPHS_BASE + ((off) << 2))
+
+/* GPIO registers 0 to 6 */
+#define _GX_GPIO_OFF(n)	((n) == 6 ? 0x08 : 0x0c + 3 * (n))
+#define GX_GPIO_EN(n)		GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 0)
+#define GX_GPIO_IN(n)		GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 1)
+#define GX_GPIO_OUT(n)	GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 2)
+
+#define GX_ETH_REG_0		GX_PERIPHS_ADDR(0x50)
+#define GX_ETH_REG_1		GX_PERIPHS_ADDR(0x51)
+#define GX_ETH_REG_2		GX_PERIPHS_ADDR(0x56)
+#define GX_ETH_REG_3		GX_PERIPHS_ADDR(0x57)
+
+#define GX_ETH_REG_0_PHY_INTF		BIT(0)
+#define GX_ETH_REG_0_TX_PHASE(x)	(((x) & 3) << 5)
+#define GX_ETH_REG_0_TX_RATIO(x)	(((x) & 7) << 7)
+#define GX_ETH_REG_0_PHY_CLK_EN	BIT(10)
+#define GX_ETH_REG_0_INVERT_RMII_CLK	BIT(11)
+#define GX_ETH_REG_0_CLK_EN		BIT(12)
+
+/* HIU registers */
+#define GX_HIU_ADDR(off)	(GX_HIU_BASE + ((off) << 2))
+
+#define GX_MEM_PD_REG_0	GX_HIU_ADDR(0x40)
+
+/* Ethernet memory power domain */
+#define GX_MEM_PD_REG_0_ETH_MASK	(BIT(2) | BIT(3))
+
+/* Clock gates */
+#define GX_GCLK_MPEG_0	GX_HIU_ADDR(0x50)
+#define GX_GCLK_MPEG_1	GX_HIU_ADDR(0x51)
+#define GX_GCLK_MPEG_2	GX_HIU_ADDR(0x52)
+#define GX_GCLK_MPEG_OTHER	GX_HIU_ADDR(0x53)
+#define GX_GCLK_MPEG_AO	GX_HIU_ADDR(0x54)
+
+#define GX_GCLK_MPEG_0_I2C   BIT(9)
+#define GX_GCLK_MPEG_1_ETH	BIT(3)
+
+#endif /* __GX_H__ */
diff --git a/arch/arm/include/asm/arch-meson/gxbb.h b/arch/arm/include/asm/arch-meson/gxbb.h
deleted file mode 100644
index c7713b2..0000000
--- a/arch/arm/include/asm/arch-meson/gxbb.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2016 - Beniamino Galvani <b.galvani@gmail.com>
- */
-
-#ifndef __GXBB_H__
-#define __GXBB_H__
-
-#define GXBB_FIRMWARE_MEM_SIZE	0x1000000
-
-#define GXBB_AOBUS_BASE		0xc8100000
-#define GXBB_PERIPHS_BASE	0xc8834400
-#define GXBB_HIU_BASE		0xc883c000
-#define GXBB_ETH_BASE		0xc9410000
-
-/* Always-On Peripherals registers */
-#define GXBB_AO_ADDR(off)	(GXBB_AOBUS_BASE + ((off) << 2))
-
-#define GXBB_AO_SEC_GP_CFG0	GXBB_AO_ADDR(0x90)
-#define GXBB_AO_SEC_GP_CFG3	GXBB_AO_ADDR(0x93)
-#define GXBB_AO_SEC_GP_CFG4	GXBB_AO_ADDR(0x94)
-#define GXBB_AO_SEC_GP_CFG5	GXBB_AO_ADDR(0x95)
-
-#define GXBB_AO_MEM_SIZE_MASK	0xFFFF0000
-#define GXBB_AO_MEM_SIZE_SHIFT	16
-#define GXBB_AO_BL31_RSVMEM_SIZE_MASK	0xFFFF0000
-#define GXBB_AO_BL31_RSVMEM_SIZE_SHIFT	16
-#define GXBB_AO_BL32_RSVMEM_SIZE_MASK	0xFFFF
-
-/* Peripherals registers */
-#define GXBB_PERIPHS_ADDR(off)	(GXBB_PERIPHS_BASE + ((off) << 2))
-
-/* GPIO registers 0 to 6 */
-#define _GXBB_GPIO_OFF(n)	((n) == 6 ? 0x08 : 0x0c + 3 * (n))
-#define GXBB_GPIO_EN(n)		GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 0)
-#define GXBB_GPIO_IN(n)		GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 1)
-#define GXBB_GPIO_OUT(n)	GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 2)
-
-#define GXBB_ETH_REG_0		GXBB_PERIPHS_ADDR(0x50)
-#define GXBB_ETH_REG_1		GXBB_PERIPHS_ADDR(0x51)
-#define GXBB_ETH_REG_2		GXBB_PERIPHS_ADDR(0x56)
-#define GXBB_ETH_REG_3		GXBB_PERIPHS_ADDR(0x57)
-
-#define GXBB_ETH_REG_0_PHY_INTF		BIT(0)
-#define GXBB_ETH_REG_0_TX_PHASE(x)	(((x) & 3) << 5)
-#define GXBB_ETH_REG_0_TX_RATIO(x)	(((x) & 7) << 7)
-#define GXBB_ETH_REG_0_PHY_CLK_EN	BIT(10)
-#define GXBB_ETH_REG_0_INVERT_RMII_CLK	BIT(11)
-#define GXBB_ETH_REG_0_CLK_EN		BIT(12)
-
-/* HIU registers */
-#define GXBB_HIU_ADDR(off)	(GXBB_HIU_BASE + ((off) << 2))
-
-#define GXBB_MEM_PD_REG_0	GXBB_HIU_ADDR(0x40)
-
-/* Ethernet memory power domain */
-#define GXBB_MEM_PD_REG_0_ETH_MASK	(BIT(2) | BIT(3))
-
-/* Clock gates */
-#define GXBB_GCLK_MPEG_0	GXBB_HIU_ADDR(0x50)
-#define GXBB_GCLK_MPEG_1	GXBB_HIU_ADDR(0x51)
-#define GXBB_GCLK_MPEG_2	GXBB_HIU_ADDR(0x52)
-#define GXBB_GCLK_MPEG_OTHER	GXBB_HIU_ADDR(0x53)
-#define GXBB_GCLK_MPEG_AO	GXBB_HIU_ADDR(0x54)
-
-#define GXBB_GCLK_MPEG_0_I2C   BIT(9)
-#define GXBB_GCLK_MPEG_1_ETH	BIT(3)
-
-#endif /* __GXBB_H__ */
diff --git a/arch/arm/mach-meson/board.c b/arch/arm/mach-meson/board.c
index 89e75fb..1ef7e5a 100644
--- a/arch/arm/mach-meson/board.c
+++ b/arch/arm/mach-meson/board.c
@@ -6,7 +6,7 @@
 #include <common.h>
 #include <linux/libfdt.h>
 #include <linux/err.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
 #include <asm/arch/sm.h>
 #include <asm/armv8/mmu.h>
 #include <asm/unaligned.h>
@@ -39,8 +39,8 @@
 phys_size_t get_effective_memsize(void)
 {
 	/* Size is reported in MiB, convert it in bytes */
-	return ((readl(GXBB_AO_SEC_GP_CFG0) & GXBB_AO_MEM_SIZE_MASK)
-			>> GXBB_AO_MEM_SIZE_SHIFT) * SZ_1M;
+	return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK)
+			>> GX_AO_MEM_SIZE_SHIFT) * SZ_1M;
 }
 
 static void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size)
@@ -71,27 +71,27 @@
 	 * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
 	 */
 
-	reg = readl(GXBB_AO_SEC_GP_CFG3);
+	reg = readl(GX_AO_SEC_GP_CFG3);
 
-	bl31_size = ((reg & GXBB_AO_BL31_RSVMEM_SIZE_MASK)
-			>> GXBB_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
-	bl32_size = (reg & GXBB_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
+	bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK)
+			>> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
+	bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
 
-	bl31_start = readl(GXBB_AO_SEC_GP_CFG5);
-	bl32_start = readl(GXBB_AO_SEC_GP_CFG4);
+	bl31_start = readl(GX_AO_SEC_GP_CFG5);
+	bl32_start = readl(GX_AO_SEC_GP_CFG4);
 
 	/*
-	 * Early Meson GXBB Firmware revisions did not provide the reserved
+	 * Early Meson GX Firmware revisions did not provide the reserved
 	 * memory zones in the registers, keep fixed memory zone handling.
 	 */
-	if (IS_ENABLED(CONFIG_MESON_GXBB) &&
+	if (IS_ENABLED(CONFIG_MESON_GX) &&
 	    !reg && !bl31_start && !bl32_start) {
 		bl31_start = 0x10000000;
 		bl31_size = 0x200000;
 	}
 
 	/* Add first 16MiB reserved zone */
-	meson_board_add_reserved_memory(fdt, 0, GXBB_FIRMWARE_MEM_SIZE);
+	meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE);
 
 	/* Add BL31 reserved zone */
 	if (bl31_start && bl31_size)
@@ -107,7 +107,7 @@
 	psci_system_reset();
 }
 
-static struct mm_region gxbb_mem_map[] = {
+static struct mm_region gx_mem_map[] = {
 	{
 		.virt = 0x0UL,
 		.phys = 0x0UL,
@@ -127,4 +127,4 @@
 	}
 };
 
-struct mm_region *mem_map = gxbb_mem_map;
+struct mm_region *mem_map = gx_mem_map;
diff --git a/arch/arm/mach-meson/eth.c b/arch/arm/mach-meson/eth.c
index e340212..061f19a 100644
--- a/arch/arm/mach-meson/eth.c
+++ b/arch/arm/mach-meson/eth.c
@@ -7,7 +7,7 @@
 #include <common.h>
 #include <dm.h>
 #include <asm/io.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
 #include <asm/arch/eth.h>
 #include <phy.h>
 
@@ -22,23 +22,23 @@
 	case PHY_INTERFACE_MODE_RGMII_RXID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
 		/* Set RGMII mode */
-		setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
-			     GXBB_ETH_REG_0_TX_PHASE(1) |
-			     GXBB_ETH_REG_0_TX_RATIO(4) |
-			     GXBB_ETH_REG_0_PHY_CLK_EN |
-			     GXBB_ETH_REG_0_CLK_EN);
+		setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
+			     GX_ETH_REG_0_TX_PHASE(1) |
+			     GX_ETH_REG_0_TX_RATIO(4) |
+			     GX_ETH_REG_0_PHY_CLK_EN |
+			     GX_ETH_REG_0_CLK_EN);
 		break;
 
 	case PHY_INTERFACE_MODE_RMII:
 		/* Set RMII mode */
-		out_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_INVERT_RMII_CLK |
-					 GXBB_ETH_REG_0_CLK_EN);
+		out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
+					 GX_ETH_REG_0_CLK_EN);
 
 		/* Use GXL RMII Internal PHY */
 		if (IS_ENABLED(CONFIG_MESON_GXL) &&
 		    (flags & MESON_GXL_USE_INTERNAL_RMII_PHY)) {
-			writel(0x10110181, GXBB_ETH_REG_2);
-			writel(0xe40908ff, GXBB_ETH_REG_3);
+			writel(0x10110181, GX_ETH_REG_2);
+			writel(0xe40908ff, GX_ETH_REG_3);
 		}
 
 		break;
@@ -49,6 +49,6 @@
 	}
 
 	/* Enable power and clock gate */
-	setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
-	clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+	setbits_le32(GX_GCLK_MPEG_1, GX_GCLK_MPEG_1_ETH);
+	clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
 }
diff --git a/arch/arm/mach-meson/sm.c b/arch/arm/mach-meson/sm.c
index 9829bae..0bba5e4 100644
--- a/arch/arm/mach-meson/sm.c
+++ b/arch/arm/mach-meson/sm.c
@@ -6,7 +6,7 @@
  */
 
 #include <common.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
 #include <linux/kernel.h>
 
 #define FN_GET_SHARE_MEM_INPUT_BASE	0x82000020