ddr: marvell: a38x: Sync code with Marvell mv-ddr-marvell repository
This syncs drivers/ddr/marvell/a38x/ with the master branch of repository
https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git up to the
commit 7c351731d196 ("Merge pull request #29 from pali/sync-a38x-uboot").
This patch was created by following steps:
1. Replace all a38x files in U-Boot tree by files from upstream github
Marvell mv-ddr-marvell repository.
2. Run following command to omit portions not relevant for a38x and ddr3:
files=drivers/ddr/marvell/a38x/*
sed 's/#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)/#ifdef TRUE/' -i $files
unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 -UCONFIG_APN806 \
-UCONFIG_MC_STATIC -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \
-UCONFIG_PHY_STATIC_PRINT -UCONFIG_CUSTOMER_BOARD_SUPPORT \
-UCONFIG_A3700 -UA3900 -UA80X0 -UA70X0 -DTRUE $files
3. Manually omit SPDX-License-Identifier changes from this patch as
upstream license in upstream github repository contains long license
texts and U-Boot is using just SPDX-License-Identifier.
After applying this patch, a38x ddr3 code in upstream Marvell github
repository and in U-Boot would be fully identical. So in future applying
above steps could be used to sync code again.
The only change in this patch is removal of dead code and some fixes with
include files.
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/drivers/ddr/marvell/a38x/ddr3_debug.c b/drivers/ddr/marvell/a38x/ddr3_debug.c
index 22e0cc4..f5fc964 100644
--- a/drivers/ddr/marvell/a38x/ddr3_debug.c
+++ b/drivers/ddr/marvell/a38x/ddr3_debug.c
@@ -6,7 +6,6 @@
#include "ddr3_init.h"
#include "mv_ddr_training_db.h"
#include "mv_ddr_regs.h"
-#include <log.h>
u8 is_reg_dump = 0;
u8 debug_pbs = DEBUG_LEVEL_ERROR;
diff --git a/drivers/ddr/marvell/a38x/ddr3_init.c b/drivers/ddr/marvell/a38x/ddr3_init.c
index 7488770..f878b45 100644
--- a/drivers/ddr/marvell/a38x/ddr3_init.c
+++ b/drivers/ddr/marvell/a38x/ddr3_init.c
@@ -77,9 +77,6 @@
return status;
}
-#if defined(CONFIG_PHY_STATIC_PRINT)
- mv_ddr_phy_static_print();
-#endif
/* Post MC/PHY initializations */
mv_ddr_post_training_soc_config(ddr_type);
diff --git a/drivers/ddr/marvell/a38x/ddr3_training.c b/drivers/ddr/marvell/a38x/ddr3_training.c
index 2b3af23..2512b58 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training.c
@@ -7,8 +7,6 @@
#include "mv_ddr_common.h"
#include "mv_ddr_training_db.h"
#include "mv_ddr_regs.h"
-#include <log.h>
-#include <linux/delay.h>
#define GET_CS_FROM_MASK(mask) (cs_mask2_num[mask])
#define CS_CBE_VALUE(cs_num) (cs_cbe_reg[cs_num])
@@ -207,7 +205,6 @@
if (tm->interface_params[0].as_bus_params[sphy].
is_ck_swap == 1 && sphy == 0) {
/* TODO: move this code to per platform one */
-#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
/* clock swap for both cs0 and cs1 */
data = (INVERT_PAD << INV_PAD2_OFFS |
INVERT_PAD << INV_PAD6_OFFS |
@@ -219,9 +216,6 @@
DDR_PHY_CONTROL,
PHY_CTRL_PHY_REG,
data, data);
-#else /* !CONFIG_ARMADA_38X && !CONFIG_ARMADA_39X */
-#pragma message "unknown platform to configure ddr clock swap"
-#endif
}
}
@@ -2014,9 +2008,7 @@
static int ddr3_tip_ddr3_training_main_flow(u32 dev_num)
{
/* TODO: enable this functionality for other platforms */
-#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
struct init_cntr_param init_cntr_prm;
-#endif
int ret = MV_OK;
int adll_bypass_flag = 0;
u32 if_id;
@@ -2050,7 +2042,6 @@
}
/* TODO: enable this functionality for other platforms */
-#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
if (is_adll_calib_before_init != 0) {
DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO,
("with adll calib before init\n"));
@@ -2081,7 +2072,6 @@
return MV_FAIL;
}
}
-#endif
ret = adll_calibration(dev_num, ACCESS_TYPE_MULTICAST, 0, freq);
if (ret != MV_OK) {
@@ -2905,3 +2895,4 @@
return odt_n;
}
+
diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c
index 5fd9a05..102f9bd 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c
@@ -6,8 +6,6 @@
#include "ddr3_init.h"
#include "mv_ddr_regs.h"
#include "ddr_training_ip_db.h"
-#include <image.h>
-#include <linux/delay.h>
#define PATTERN_1 0x55555555
#define PATTERN_2 0xaaaaaaaa
@@ -614,9 +612,9 @@
MASK_ALL_BITS));
}
- CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id,
- ODPG_DATA_BUFFER_OFFS_REG,
- load_addr, MASK_ALL_BITS));
+ CHECK_STATUS(ddr3_tip_if_write
+ (dev_num, access_type, if_id,
+ ODPG_DATA_BUFFER_OFFS_REG, load_addr, MASK_ALL_BITS));
return MV_OK;
}
diff --git a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c
index dadb06b..7f7df67 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c
@@ -7,7 +7,6 @@
#include "mv_ddr_training_db.h"
#include "ddr_training_ip_db.h"
#include "mv_ddr_regs.h"
-#include <linux/delay.h>
#define WL_ITERATION_NUM 10
diff --git a/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h b/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h
index ac9250f..7357311 100644
--- a/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h
+++ b/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h
@@ -13,9 +13,7 @@
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
-#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
#define INTER_REGS_BASE SOC_REGS_PHY_BASE
-#endif
/*
* MV_DEBUG_INIT need to be defines, otherwise the output of the
diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.c b/drivers/ddr/marvell/a38x/mv_ddr_plat.c
index 0d1df18..da0d63d 100644
--- a/drivers/ddr/marvell/a38x/mv_ddr_plat.c
+++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.c
@@ -8,7 +8,6 @@
#include "mv_ddr_training_db.h"
#include "mv_ddr_regs.h"
#include "mv_ddr_sys_env_lib.h"
-#include <linux/delay.h>
#define DDR_INTERFACES_NUM 1
#define DDR_INTERFACE_OCTETS_NUM 5
diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.h b/drivers/ddr/marvell/a38x/mv_ddr_plat.h
index 281d4c2..4499884 100644
--- a/drivers/ddr/marvell/a38x/mv_ddr_plat.h
+++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.h
@@ -6,6 +6,8 @@
#ifndef _MV_DDR_PLAT_H
#define _MV_DDR_PLAT_H
+#include <linux/delay.h>
+
#define MAX_DEVICE_NUM 1
#define MAX_INTERFACE_NUM 1
#define MAX_BUS_NUM 5
diff --git a/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h b/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h
index dc6977c..cf51420 100644
--- a/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h
+++ b/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h
@@ -78,20 +78,6 @@
* set '-2'
* If suspend to RAM is not supported set '-1'
*/
-#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT
-#ifdef CONFIG_ARMADA_38X
-#define MV_BOARD_WAKEUP_GPIO_INFO { \
- {A38X_CUSTOMER_BOARD_ID0, -1 }, \
- {A38X_CUSTOMER_BOARD_ID0, -1 }, \
-};
-#else
-#define MV_BOARD_WAKEUP_GPIO_INFO { \
- {A39X_CUSTOMER_BOARD_ID0, -1 }, \
- {A39X_CUSTOMER_BOARD_ID0, -1 }, \
-};
-#endif /* CONFIG_ARMADA_38X */
-
-#else
#ifdef CONFIG_ARMADA_38X
#define MV_BOARD_WAKEUP_GPIO_INFO { \
@@ -109,7 +95,6 @@
{A39X_DB_69XX_ID, -1 }, \
};
#endif /* CONFIG_ARMADA_38X */
-#endif /* CONFIG_CUSTOMER_BOARD_SUPPORT */
enum suspend_wakeup_status mv_ddr_sys_env_suspend_wakeup_check(void);
u32 mv_ddr_sys_env_get_cs_ena_from_reg(void);
diff --git a/drivers/ddr/marvell/a38x/xor.c b/drivers/ddr/marvell/a38x/xor.c
index 98fb39e..7bc6268 100644
--- a/drivers/ddr/marvell/a38x/xor.c
+++ b/drivers/ddr/marvell/a38x/xor.c
@@ -347,10 +347,8 @@
for (cs_c = 0; cs_c < max_cs; cs_c++)
cs_ena |= 1 << cs_c;
-#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
/* all chip-selects are of same size */
ddr3_calc_mem_cs_size(0, &cs_mem_size_mb);
-#endif
cs_mem_size = cs_mem_size_mb * _1M;
mv_sys_xor_init(max_cs, cs_ena, cs_mem_size, 0);
total_mem_size = max_cs * cs_mem_size;