ARM: OMAP4470: Add voltage and dpll data
OMAP4470 reference design uses TWL6032 PMIC
with a following connection scheme:
VDD_CORE = TWL6032 SMPS2
VDD_MPU = TWL6032 SMPS1
VDD_IVA = TWL6032 SMPS5
Set voltage and frequency values according to
OMAP4470 Data Manual Operating Condition Addendum v0.7
Signed-off-by: Taras Kondratiuk <taras@ti.com>
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 310df5a..6a225c8 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -50,6 +50,7 @@
/*
* dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430)
* OMAP4430 OPP_TURBO frequency
+ * OMAP4470 OPP_NOM frequency
*/
static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = {
{200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
@@ -76,6 +77,7 @@
};
/* OMAP4460 OPP_NOM frequency */
+/* OMAP4470 OPP_NOM (Low Power) frequency */
static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
{200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */
{800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */
@@ -198,6 +200,20 @@
.ddr = NULL
};
+struct dplls omap4470_dplls = {
+ .mpu = mpu_dpll_params_1600mhz,
+ .core = core_dpll_params_1600mhz,
+ .per = per_dpll_params_1536mhz,
+ .iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+ .abe = abe_dpll_params_sysclk_196608khz,
+#else
+ .abe = &abe_dpll_params_32k_196608khz,
+#endif
+ .usb = usb_dpll_params_1920mhz,
+ .ddr = NULL
+};
+
struct pmic_data twl6030_4430es1 = {
.base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV,
.step = 12660, /* 12.66 mV represented in uV */
@@ -208,6 +224,7 @@
.pmic_write = omap_vc_bypass_send_value,
};
+/* twl6030 struct is used for TWL6030 and TWL6032 PMIC */
struct pmic_data twl6030 = {
.base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV,
.step = 12660, /* 12.66 mV represented in uV */
@@ -271,6 +288,20 @@
.mm.pmic = &twl6030,
};
+struct vcores_data omap4470_volts = {
+ .mpu.value = 1200,
+ .mpu.addr = SMPS_REG_ADDR_SMPS1,
+ .mpu.pmic = &twl6030,
+
+ .core.value = 1126,
+ .core.addr = SMPS_REG_ADDR_SMPS1,
+ .core.pmic = &twl6030,
+
+ .mm.value = 1137,
+ .mm.addr = SMPS_REG_ADDR_SMPS1,
+ .mm.pmic = &twl6030,
+};
+
/*
* Enable essential clock domains, modules and
* do some additional special settings needed
@@ -476,6 +507,11 @@
*omap_vcores = &omap4460_volts;
break;
+ case OMAP4470_ES1_0:
+ *dplls_data = &omap4470_dplls;
+ *omap_vcores = &omap4470_volts;
+ break;
+
default:
printf("\n INVALID OMAP REVISION ");
}
diff --git a/arch/arm/include/asm/arch-omap4/clock.h b/arch/arm/include/asm/arch-omap4/clock.h
index b2e03d6..f3a682a 100644
--- a/arch/arm/include/asm/arch-omap4/clock.h
+++ b/arch/arm/include/asm/arch-omap4/clock.h
@@ -149,11 +149,16 @@
/* PRM_VC_VAL_BYPASS */
#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
-/* SMPS */
+/* PMIC */
#define SMPS_I2C_SLAVE_ADDR 0x12
+/* TWL6030 SMPS */
#define SMPS_REG_ADDR_VCORE1 0x55
#define SMPS_REG_ADDR_VCORE2 0x5B
#define SMPS_REG_ADDR_VCORE3 0x61
+/* TWL6032 SMPS */
+#define SMPS_REG_ADDR_SMPS1 0x55
+#define SMPS_REG_ADDR_SMPS2 0x5B
+#define SMPS_REG_ADDR_SMPS5 0x49
#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV 607700
#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV 709000