usb: xhci: Recover from halted bulk endpoints
There is currently no codepath to recover from this case. In principle
we could require that the upper layer do this explicitly, but let's just
do it in xHCI when the next bulk transfer is started, since that
reasonably implies whatever caused the problem has been dealt with.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Marek Vasut <marex@denx.de>
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index e02a6e30..db8b8f2 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -671,6 +671,14 @@
ep_ctx = xhci_get_ep_ctx(ctrl, virt_dev->out_ctx, ep_index);
+ /*
+ * If the endpoint was halted due to a prior error, resume it before
+ * the next transfer. It is the responsibility of the upper layer to
+ * have dealt with whatever caused the error.
+ */
+ if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) == EP_STATE_HALTED)
+ reset_ep(udev, ep_index);
+
ring = virt_dev->eps[ep_index].ring;
/*
* How much data is (potentially) left before the 64KB boundary?