arm64: ls2088ardb: Add distro secure boot support
Enable validation of boot.scr script prior to its execution dependent
on "secureboot" flag in environment. Also enable "secureboot=y"
flag in environment for ARM based platforms instead of bootcmd.
Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index d8e29fc..620ccbe 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -358,33 +358,22 @@
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
+#ifdef CONFIG_QSPI_BOOT
+#define MC_INIT_CMD \
+ "mcinitcmd=env exists secureboot && " \
+ "esbc_validate 0x20700000 && " \
+ "esbc_validate 0x20740000;" \
+ "fsl_mc start mc 0x20a00000 0x20e00000 \0"
+#else
+#define MC_INIT_CMD \
+ "mcinitcmd=env exists secureboot && " \
+ "esbc_validate 0x580700000 && " \
+ "esbc_validate 0x580740000; " \
+ "fsl_mc start mc 0x580a00000 0x580e00000 \0"
+#endif
+
/* Initial environment variables */
#undef CONFIG_EXTRA_ENV_SETTINGS
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "scriptaddr=0x80800000\0" \
- "kernel_addr_r=0x81000000\0" \
- "pxefile_addr_r=0x81000000\0" \
- "fdt_addr_r=0x88000000\0" \
- "ramdisk_addr_r=0x89000000\0" \
- "loadaddr=0x80100000\0" \
- "kernel_addr=0x100000\0" \
- "ramdisk_addr=0x800000\0" \
- "ramdisk_size=0x2000000\0" \
- "fdt_high=0xa0000000\0" \
- "initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x581000000\0" \
- "kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0" \
- "mcmemsize=0x40000000\0" \
- "fdtfile=fsl-ls2080a-rdb.dtb\0" \
- "mcinitcmd=esbc_validate 0x580700000;" \
- "esbc_validate 0x580740000;" \
- "fsl_mc start mc 0x580a00000" \
- " 0x580e00000 \0" \
- BOOTENV
-#else
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"ramdisk_addr=0x800000\0" \
@@ -393,16 +382,23 @@
"initrd_high=0xffffffffffffffff\0" \
"fdt_addr=0x64f00000\0" \
"kernel_addr=0x65000000\0" \
+ "kernel_start=0x1000000\0" \
+ "kernelheader_start=0x800000\0" \
"scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
"fdtheader_addr_r=0x80100000\0" \
"kernelheader_addr_r=0x80200000\0" \
+ "kernelheader_addr=0x580800000\0" \
"kernel_addr_r=0x81000000\0" \
+ "kernelheader_size=0x40000\0" \
"fdt_addr_r=0x90000000\0" \
"load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
"console=ttyAMA0,38400n8\0" \
+ MC_INIT_CMD \
BOOTENV \
"boot_scripts=ls2088ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls2088ardb_bs.out\0" \
"scan_dev_for_boot_part=" \
"part list ${devtype} ${devnum} devplist; " \
"env exists devplist || setenv devplist 1; " \
@@ -413,31 +409,54 @@
"run scan_dev_for_boot; " \
"fi; " \
"done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
"installer=load mmc 0:2 $load_addr " \
"/flex_installer_arm64.itb; " \
"bootm $load_addr#ls2088ardb\0" \
"qspi_bootcmd=echo Trying load from qspi..;" \
"sf probe && sf read $load_addr " \
- "$kernel_addr $kernel_size &&" \
+ "$kernel_start $kernel_size ; env exists secureboot &&" \
+ "sf read $kernelheader_addr_r $kernelheader_start " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
" bootm $load_addr#$board\0" \
"nor_bootcmd=echo Trying load from nor..;" \
"cp.b $kernel_addr $load_addr " \
- "$kernel_size && bootm $load_addr#$board\0"
-#endif
+ "$kernel_size ; env exists secureboot && " \
+ "cp.b $kernelheader_addr $kernelheader_addr_r " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ "bootm $load_addr#$board\0"
#undef CONFIG_BOOTCOMMAND
#ifdef CONFIG_QSPI_BOOT
/* Try to boot an on-QSPI kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND \
- "fsl_mc start mc 0x20a00000 0x20e00000 &&" \
- " fsl_mc lazyapply dpl 0x20d00000;" \
- "run distro_bootcmd;run qspi_bootcmd"
+ "env exists mcinitcmd && env exists secureboot "\
+ "&& esbc_validate 0x20780000; " \
+ "env exists mcinitcmd && " \
+ "fsl_mc lazyapply dpl 0x20d00000; " \
+ "run distro_bootcmd;run qspi_bootcmd; " \
+ "env exists secureboot && esbc_halt; "
#else
/* Try to boot an on-NOR kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND \
- "fsl_mc start mc 0x580a00000 0x580e00000 &&" \
- " fsl_mc lazyapply dpl 0x580d00000;" \
- "run distro_bootcmd;run nor_bootcmd"
+ "env exists mcinitcmd && env exists secureboot "\
+ "&& esbc_validate 0x580780000; env exists mcinitcmd "\
+ "&& fsl_mc lazyapply dpl 0x580d00000;" \
+ "run distro_bootcmd;run nor_bootcmd; " \
+ "env exists secureboot && esbc_halt; "
#endif
#undef CONFIG_BOOTARGS