ARM: display5: Remove "factory procedure" from display5 board config
This code now is regarded as dead one and hence shall be removed.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig
index edb37c3..5962b64 100644
--- a/configs/display5_factory_defconfig
+++ b/configs/display5_factory_defconfig
@@ -15,7 +15,7 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run factory"
+CONFIG_BOOTCOMMAND="echo SDP Display5 recovery"
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_MISC_INIT_R=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
diff --git a/include/configs/display5.h b/include/configs/display5.h
index 514638f..6d00699 100644
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -115,27 +115,6 @@
"name=rootfs2,size=512M,uuid=${uuid_gpt_rootfs2};" \
"name=data,size=-,uuid=${uuid_gpt_data}\0"
-#define FACTORY_PROCEDURE \
- "echo '#######################';" \
- "echo '# Factory Boot #';" \
- "echo '#######################';" \
- "env default -a;" \
- "saveenv;" \
- "gpt write mmc ${mmcdev} ${partitions};" \
- "run tftp_sf_SPL;" \
- "run tftp_sf_uboot;" \
- TFTP_UPDATE_KERNEL \
- "run tftp_sf_fitImg_SWU;" \
- "run tftp_sf_initramfs_SWU;" \
- TFTP_UPDATE_ROOTFS \
- "echo '#######################';" \
- "echo '# END - OK #';" \
- "echo '#######################';" \
- "setenv bootcmd 'env default -a; saveenv; run falcon_setup; reset';" \
- "setenv boot_os 'n';" \
- "saveenv;" \
- "reset;"
-
#define SWUPDATE_RECOVERY_PROCEDURE \
"echo '#######################';" \
"echo '# RECOVERY SWUupdate #';" \
@@ -261,7 +240,6 @@
"bootdelay=1\0" \
"baudrate=115200\0" \
"bootcmd=" CONFIG_BOOTCOMMAND "\0" \
- "factory=" FACTORY_PROCEDURE "\0" \
"ethact=FEC\0" \
"netdev=eth0\0" \
"boot_os=y\0" \