| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2019 |
| * Alex Marginean, NXP |
| */ |
| |
| #include <dm.h> |
| #include <log.h> |
| #include <miiphy.h> |
| #include <dm/device-internal.h> |
| #include <dm/uclass-internal.h> |
| #include <dm/lists.h> |
| |
| #define MDIO_MUX_CHILD_DRV_NAME "mdio-mux-bus-drv" |
| |
| /** |
| * struct mdio_mux_perdev_priv - Per-device class data for MDIO MUX DM |
| * |
| * @parent_mdio: Parent DM MDIO device, this is called for actual MDIO I/O after |
| * setting up the mux. Typically this is a real MDIO device, |
| * unless there are cascaded muxes. |
| * @selected: Current child bus selection. Defaults to -1 |
| */ |
| struct mdio_mux_perdev_priv { |
| struct udevice *mdio_parent; |
| int selected; |
| }; |
| |
| /* |
| * This source file uses three types of devices, as follows: |
| * - mux is the hardware MDIO MUX which selects between the existing child MDIO |
| * buses, this is the device relevant for MDIO MUX class of drivers. |
| * - ch is a child MDIO bus, this is just a representation of a mux selection, |
| * not a real piece of hardware. |
| * - mdio_parent is the actual MDIO bus called to perform reads/writes after |
| * the MUX is configured. Typically this is a real MDIO device, unless there |
| * are cascaded muxes. |
| */ |
| |
| /** |
| * struct mdio_mux_ch_data - Per-device data for child MDIOs |
| * |
| * @sel: Selection value used by the MDIO MUX to access this child MDIO bus |
| */ |
| struct mdio_mux_ch_data { |
| int sel; |
| }; |
| |
| static struct udevice *mmux_get_parent_mdio(struct udevice *mux) |
| { |
| struct mdio_mux_perdev_priv *pdata = dev_get_uclass_priv(mux); |
| |
| return pdata->mdio_parent; |
| } |
| |
| /* call driver select function before performing MDIO r/w */ |
| static int mmux_change_sel(struct udevice *ch, bool sel) |
| { |
| struct udevice *mux = ch->parent; |
| struct mdio_mux_perdev_priv *priv = dev_get_uclass_priv(mux); |
| struct mdio_mux_ops *ops = mdio_mux_get_ops(mux); |
| struct mdio_mux_ch_data *ch_data = dev_get_parent_plat(ch); |
| int err = 0; |
| |
| if (sel) { |
| err = ops->select(mux, priv->selected, ch_data->sel); |
| if (err) |
| return err; |
| |
| priv->selected = ch_data->sel; |
| } else { |
| if (ops->deselect) { |
| ops->deselect(mux, ch_data->sel); |
| priv->selected = MDIO_MUX_SELECT_NONE; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* Read wrapper, sets up the mux before issuing a read on parent MDIO bus */ |
| static int mmux_read(struct udevice *ch, int addr, int devad, |
| int reg) |
| { |
| struct udevice *mux = ch->parent; |
| struct udevice *parent_mdio = mmux_get_parent_mdio(mux); |
| int err; |
| |
| err = mmux_change_sel(ch, true); |
| if (err) |
| return err; |
| |
| err = dm_mdio_read(parent_mdio, addr, devad, reg); |
| mmux_change_sel(ch, false); |
| |
| return err; |
| } |
| |
| /* Write wrapper, sets up the mux before issuing a write on parent MDIO bus */ |
| static int mmux_write(struct udevice *ch, int addr, int devad, |
| int reg, u16 val) |
| { |
| struct udevice *mux = ch->parent; |
| struct udevice *parent_mdio = mmux_get_parent_mdio(mux); |
| int err; |
| |
| err = mmux_change_sel(ch, true); |
| if (err) |
| return err; |
| |
| err = dm_mdio_write(parent_mdio, addr, devad, reg, val); |
| mmux_change_sel(ch, false); |
| |
| return err; |
| } |
| |
| /* Reset wrapper, sets up the mux before issuing a reset on parent MDIO bus */ |
| static int mmux_reset(struct udevice *ch) |
| { |
| struct udevice *mux = ch->parent; |
| struct udevice *parent_mdio = mmux_get_parent_mdio(mux); |
| int err; |
| |
| /* reset is optional, if it's not implemented just exit */ |
| if (!mdio_get_ops(parent_mdio)->reset) |
| return 0; |
| |
| err = mmux_change_sel(ch, true); |
| if (err) |
| return err; |
| |
| err = dm_mdio_reset(parent_mdio); |
| mmux_change_sel(ch, false); |
| |
| return err; |
| } |
| |
| /* Picks up the mux selection value for each child */ |
| static int dm_mdio_mux_child_post_bind(struct udevice *ch) |
| { |
| struct mdio_mux_ch_data *ch_data = dev_get_parent_plat(ch); |
| |
| ch_data->sel = dev_read_u32_default(ch, "reg", MDIO_MUX_SELECT_NONE); |
| |
| if (ch_data->sel == MDIO_MUX_SELECT_NONE) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /* Explicitly bind child MDIOs after binding the mux */ |
| static int dm_mdio_mux_post_bind(struct udevice *mux) |
| { |
| ofnode ch_node; |
| int err, first_err = 0; |
| |
| if (!dev_has_ofnode(mux)) { |
| debug("%s: no mux node found, no child MDIO busses set up\n", |
| __func__); |
| return 0; |
| } |
| |
| /* |
| * we're going by Linux bindings so the child nodes do not have |
| * compatible strings. We're going through them here and binding to |
| * them. |
| */ |
| dev_for_each_subnode(ch_node, mux) { |
| struct udevice *ch_dev; |
| const char *ch_name; |
| |
| ch_name = ofnode_get_name(ch_node); |
| |
| err = device_bind_driver_to_node(mux, MDIO_MUX_CHILD_DRV_NAME, |
| ch_name, ch_node, &ch_dev); |
| /* try to bind all, but keep 1st error */ |
| if (err && !first_err) |
| first_err = err; |
| } |
| |
| return first_err; |
| } |
| |
| /* Get a reference to the parent MDIO bus, it should be bound by now */ |
| static int dm_mdio_mux_post_probe(struct udevice *mux) |
| { |
| struct mdio_mux_perdev_priv *priv = dev_get_uclass_priv(mux); |
| int err; |
| |
| priv->selected = MDIO_MUX_SELECT_NONE; |
| |
| /* pick up mdio parent from device tree */ |
| err = uclass_get_device_by_phandle(UCLASS_MDIO, mux, "mdio-parent-bus", |
| &priv->mdio_parent); |
| if (err) { |
| debug("%s: didn't find mdio-parent-bus\n", __func__); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| const struct mdio_ops mmux_child_mdio_ops = { |
| .read = mmux_read, |
| .write = mmux_write, |
| .reset = mmux_reset, |
| }; |
| |
| /* MDIO class driver used for MUX child MDIO buses */ |
| U_BOOT_DRIVER(mdio_mux_child) = { |
| .name = MDIO_MUX_CHILD_DRV_NAME, |
| .id = UCLASS_MDIO, |
| .ops = &mmux_child_mdio_ops, |
| }; |
| |
| UCLASS_DRIVER(mdio_mux) = { |
| .id = UCLASS_MDIO_MUX, |
| .name = "mdio-mux", |
| .child_post_bind = dm_mdio_mux_child_post_bind, |
| .post_bind = dm_mdio_mux_post_bind, |
| .post_probe = dm_mdio_mux_post_probe, |
| .per_device_auto = sizeof(struct mdio_mux_perdev_priv), |
| .per_child_plat_auto = sizeof(struct mdio_mux_ch_data), |
| }; |