drivers/misc/sifive-otp.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0
 /*
  * This is a driver for the eMemory EG004K32TQ028XW01 NeoFuse
  * One-Time-Programmable (OTP) memory used within the SiFive FU540.
  * It is documented in the FU540 manual here:
  * https://www.sifive.com/documentation/chips/freedom-u540-c000-manual/
  *
  * Copyright (C) 2018 Philipp Hug <philipp@hug.cx>
  * Copyright (C) 2018 Joey Hewitt <joey@joeyhewitt.com>
  *
  * Copyright (C) 2020 SiFive, Inc
  */

 /*
  * The FU540 stores 4096x32 bit (16KiB) values.
  * Index 0x00-0xff are reserved for SiFive internal use. (first 1KiB)
  * Right now first 1KiB is used to store only serial number.
  */

 #include <dm/device.h>
 #include <dm/read.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <misc.h>
 #include <linux/printk.h>

 #define BYTES_PER_FUSE		4

 #define PA_RESET_VAL		0x00
 #define PAS_RESET_VAL		0x00
 #define PAIO_RESET_VAL		0x00
 #define PDIN_RESET_VAL		0x00
 #define PTM_RESET_VAL		0x00

 #define PCLK_ENABLE_VAL			BIT(0)
 #define PCLK_DISABLE_VAL		0x00

 #define PWE_WRITE_ENABLE		BIT(0)
 #define PWE_WRITE_DISABLE		0x00

 #define PTM_FUSE_PROGRAM_VAL		BIT(1)

 #define PCE_ENABLE_INPUT		BIT(0)
 #define PCE_DISABLE_INPUT		0x00

 #define PPROG_ENABLE_INPUT		BIT(0)
 #define PPROG_DISABLE_INPUT		0x00

 #define PTRIM_ENABLE_INPUT		BIT(0)
 #define PTRIM_DISABLE_INPUT		0x00

 #define PDSTB_DEEP_STANDBY_ENABLE	BIT(0)
 #define PDSTB_DEEP_STANDBY_DISABLE	0x00

 /* Tpw - Program Pulse width delay */
 #define TPW_DELAY			20

 /* Tpwi - Program Pulse interval delay */
 #define TPWI_DELAY			5

 /* Tasp - Program address setup delay */
 #define TASP_DELAY			1

 /* Tcd - read data access delay */
 #define TCD_DELAY			40

 /* Tkl - clok pulse low delay */
 #define TKL_DELAY			10

 /* Tms - PTM mode setup delay */
 #define TMS_DELAY			1

 struct sifive_otp_regs {
 	u32 pa;     /* Address input */
 	u32 paio;   /* Program address input */
 	u32 pas;    /* Program redundancy cell selection input */
 	u32 pce;    /* OTP Macro enable input */
 	u32 pclk;   /* Clock input */
 	u32 pdin;   /* Write data input */
 	u32 pdout;  /* Read data output */
 	u32 pdstb;  /* Deep standby mode enable input (active low) */
 	u32 pprog;  /* Program mode enable input */
 	u32 ptc;    /* Test column enable input */
 	u32 ptm;    /* Test mode enable input */
 	u32 ptm_rep;/* Repair function test mode enable input */
 	u32 ptr;    /* Test row enable input */
 	u32 ptrim;  /* Repair function enable input */
 	u32 pwe;    /* Write enable input (defines program cycle) */
 };

 struct sifive_otp_plat {
 	struct sifive_otp_regs __iomem *regs;
 	u32 total_fuses;
 };

 /*
  * offset and size are assumed aligned to the size of the fuses (32-bit).
  */
 static int sifive_otp_read(struct udevice *dev, int offset,
 			   void *buf, int size)
 {
 	struct sifive_otp_plat *plat = dev_get_plat(dev);
 	struct sifive_otp_regs *regs = (struct sifive_otp_regs *)plat->regs;

 	/* Check if offset and size are multiple of BYTES_PER_FUSE */
 	if ((size % BYTES_PER_FUSE) || (offset % BYTES_PER_FUSE)) {
 		printf("%s: size and offset must be multiple of 4.\n",
 		       __func__);
 		return -EINVAL;
 	}

 	int fuseidx = offset / BYTES_PER_FUSE;
 	int fusecount = size / BYTES_PER_FUSE;

 	/* check bounds */
 	if (offset < 0 || size < 0)
 		return -EINVAL;
 	if (fuseidx >= plat->total_fuses)
 		return -EINVAL;
 	if ((fuseidx + fusecount) > plat->total_fuses)
 		return -EINVAL;

 	u32 fusebuf[fusecount];

 	/* init OTP */
 	writel(PDSTB_DEEP_STANDBY_ENABLE, &regs->pdstb);
 	writel(PTRIM_ENABLE_INPUT, &regs->ptrim);
 	writel(PCE_ENABLE_INPUT, &regs->pce);

 	/* read all requested fuses */
 	for (unsigned int i = 0; i < fusecount; i++, fuseidx++) {
 		writel(fuseidx, &regs->pa);

 		/* cycle clock to read */
 		writel(PCLK_ENABLE_VAL, &regs->pclk);
 		ndelay(TCD_DELAY * 1000);
 		writel(PCLK_DISABLE_VAL, &regs->pclk);
 		ndelay(TKL_DELAY * 1000);

 		/* read the value */
 		fusebuf[i] = readl(&regs->pdout);
 	}

 	/* shut down */
 	writel(PCE_DISABLE_INPUT, &regs->pce);
 	writel(PTRIM_DISABLE_INPUT, &regs->ptrim);
 	writel(PDSTB_DEEP_STANDBY_DISABLE, &regs->pdstb);

 	/* copy out */
 	memcpy(buf, fusebuf, size);

 	return size;
 }

 /*
  * Caution:
  * OTP can be written only once, so use carefully.
  *
  * offset and size are assumed aligned to the size of the fuses (32-bit).
  */
 static int sifive_otp_write(struct udevice *dev, int offset,
 			    const void *buf, int size)
 {
 	struct sifive_otp_plat *plat = dev_get_plat(dev);
 	struct sifive_otp_regs *regs = (struct sifive_otp_regs *)plat->regs;

 	/* Check if offset and size are multiple of BYTES_PER_FUSE */
 	if ((size % BYTES_PER_FUSE) || (offset % BYTES_PER_FUSE)) {
 		printf("%s: size and offset must be multiple of 4.\n",
 		       __func__);
 		return -EINVAL;
 	}

 	int fuseidx = offset / BYTES_PER_FUSE;
 	int fusecount = size / BYTES_PER_FUSE;
 	u32 *write_buf = (u32 *)buf;
 	u32 write_data;
 	int i, pas, bit;

 	/* check bounds */
 	if (offset < 0 || size < 0)
 		return -EINVAL;
 	if (fuseidx >= plat->total_fuses)
 		return -EINVAL;
 	if ((fuseidx + fusecount) > plat->total_fuses)
 		return -EINVAL;

 	/* init OTP */
 	writel(PDSTB_DEEP_STANDBY_ENABLE, &regs->pdstb);
 	writel(PTRIM_ENABLE_INPUT, &regs->ptrim);

 	/* reset registers */
 	writel(PCLK_DISABLE_VAL, &regs->pclk);
 	writel(PA_RESET_VAL, &regs->pa);
 	writel(PAS_RESET_VAL, &regs->pas);
 	writel(PAIO_RESET_VAL, &regs->paio);
 	writel(PDIN_RESET_VAL, &regs->pdin);
 	writel(PWE_WRITE_DISABLE, &regs->pwe);
 	writel(PTM_FUSE_PROGRAM_VAL, &regs->ptm);
 	ndelay(TMS_DELAY * 1000);

 	writel(PCE_ENABLE_INPUT, &regs->pce);
 	writel(PPROG_ENABLE_INPUT, &regs->pprog);

 	/* write all requested fuses */
 	for (i = 0; i < fusecount; i++, fuseidx++) {
 		writel(fuseidx, &regs->pa);
 		write_data = *(write_buf++);

 		for (pas = 0; pas < 2; pas++) {
 			writel(pas, &regs->pas);

 			for (bit = 0; bit < 32; bit++) {
 				writel(bit, &regs->paio);
 				writel(((write_data >> bit) & 1),
 				       &regs->pdin);
 				ndelay(TASP_DELAY * 1000);

 				writel(PWE_WRITE_ENABLE, &regs->pwe);
 				udelay(TPW_DELAY);
 				writel(PWE_WRITE_DISABLE, &regs->pwe);
 				udelay(TPWI_DELAY);
 			}
 		}

 		writel(PAS_RESET_VAL, &regs->pas);
 	}

 	/* shut down */
 	writel(PWE_WRITE_DISABLE, &regs->pwe);
 	writel(PPROG_DISABLE_INPUT, &regs->pprog);
 	writel(PCE_DISABLE_INPUT, &regs->pce);
 	writel(PTM_RESET_VAL, &regs->ptm);

 	writel(PTRIM_DISABLE_INPUT, &regs->ptrim);
 	writel(PDSTB_DEEP_STANDBY_DISABLE, &regs->pdstb);

 	return size;
 }

 static int sifive_otp_of_to_plat(struct udevice *dev)
 {
 	struct sifive_otp_plat *plat = dev_get_plat(dev);
 	int ret;

 	plat->regs = dev_read_addr_ptr(dev);

 	ret = dev_read_u32(dev, "fuse-count", &plat->total_fuses);
 	if (ret < 0) {
 		pr_err("\"fuse-count\" not found\n");
 		return ret;
 	}

 	return 0;
 }

 static const struct misc_ops sifive_otp_ops = {
 	.read = sifive_otp_read,
 	.write = sifive_otp_write,
 };

 static const struct udevice_id sifive_otp_ids[] = {
 	{ .compatible = "sifive,fu540-c000-otp" },
 	{}
 };

 U_BOOT_DRIVER(sifive_otp) = {
 	.name = "sifive_otp",
 	.id = UCLASS_MISC,
 	.of_match = sifive_otp_ids,
 	.of_to_plat = sifive_otp_of_to_plat,
 	.plat_auto	= sizeof(struct sifive_otp_plat),
 	.ops = &sifive_otp_ops,
 };
	// SPDX-License-Identifier: GPL-2.0
	/*
	* This is a driver for the eMemory EG004K32TQ028XW01 NeoFuse
	* One-Time-Programmable (OTP) memory used within the SiFive FU540.
	* It is documented in the FU540 manual here:
	* https://www.sifive.com/documentation/chips/freedom-u540-c000-manual/
	*
	* Copyright (C) 2018 Philipp Hug <philipp@hug.cx>
	* Copyright (C) 2018 Joey Hewitt <joey@joeyhewitt.com>
	*
	* Copyright (C) 2020 SiFive, Inc
	*/

	/*
	* The FU540 stores 4096x32 bit (16KiB) values.
	* Index 0x00-0xff are reserved for SiFive internal use. (first 1KiB)
	* Right now first 1KiB is used to store only serial number.
	*/

	#include <dm/device.h>
	#include <dm/read.h>
	#include <linux/bitops.h>
	#include <linux/delay.h>
	#include <linux/io.h>
	#include <misc.h>
	#include <linux/printk.h>

	#define BYTES_PER_FUSE 4

	#define PA_RESET_VAL 0x00
	#define PAS_RESET_VAL 0x00
	#define PAIO_RESET_VAL 0x00
	#define PDIN_RESET_VAL 0x00
	#define PTM_RESET_VAL 0x00

	#define PCLK_ENABLE_VAL BIT(0)
	#define PCLK_DISABLE_VAL 0x00

	#define PWE_WRITE_ENABLE BIT(0)
	#define PWE_WRITE_DISABLE 0x00

	#define PTM_FUSE_PROGRAM_VAL BIT(1)

	#define PCE_ENABLE_INPUT BIT(0)
	#define PCE_DISABLE_INPUT 0x00

	#define PPROG_ENABLE_INPUT BIT(0)
	#define PPROG_DISABLE_INPUT 0x00

	#define PTRIM_ENABLE_INPUT BIT(0)
	#define PTRIM_DISABLE_INPUT 0x00

	#define PDSTB_DEEP_STANDBY_ENABLE BIT(0)
	#define PDSTB_DEEP_STANDBY_DISABLE 0x00

	/* Tpw - Program Pulse width delay */
	#define TPW_DELAY 20

	/* Tpwi - Program Pulse interval delay */
	#define TPWI_DELAY 5

	/* Tasp - Program address setup delay */
	#define TASP_DELAY 1

	/* Tcd - read data access delay */
	#define TCD_DELAY 40

	/* Tkl - clok pulse low delay */
	#define TKL_DELAY 10

	/* Tms - PTM mode setup delay */
	#define TMS_DELAY 1

	struct sifive_otp_regs {
	u32 pa; /* Address input */
	u32 paio; /* Program address input */
	u32 pas; /* Program redundancy cell selection input */
	u32 pce; /* OTP Macro enable input */
	u32 pclk; /* Clock input */
	u32 pdin; /* Write data input */
	u32 pdout; /* Read data output */
	u32 pdstb; /* Deep standby mode enable input (active low) */
	u32 pprog; /* Program mode enable input */
	u32 ptc; /* Test column enable input */
	u32 ptm; /* Test mode enable input */
	u32 ptm_rep;/* Repair function test mode enable input */
	u32 ptr; /* Test row enable input */
	u32 ptrim; /* Repair function enable input */
	u32 pwe; /* Write enable input (defines program cycle) */
	};

	struct sifive_otp_plat {
	struct sifive_otp_regs __iomem *regs;
	u32 total_fuses;
	};

	/*
	* offset and size are assumed aligned to the size of the fuses (32-bit).
	*/
	static int sifive_otp_read(struct udevice *dev, int offset,
	void *buf, int size)
	{
	struct sifive_otp_plat *plat = dev_get_plat(dev);
	struct sifive_otp_regs regs = (struct sifive_otp_regs )plat->regs;

	/* Check if offset and size are multiple of BYTES_PER_FUSE */
	if ((size % BYTES_PER_FUSE) \|\| (offset % BYTES_PER_FUSE)) {
	printf("%s: size and offset must be multiple of 4.\n",
	__func__);
	return -EINVAL;
	}

	int fuseidx = offset / BYTES_PER_FUSE;
	int fusecount = size / BYTES_PER_FUSE;

	/* check bounds */
	if (offset < 0 \|\| size < 0)
	return -EINVAL;
	if (fuseidx >= plat->total_fuses)
	return -EINVAL;
	if ((fuseidx + fusecount) > plat->total_fuses)
	return -EINVAL;

	u32 fusebuf[fusecount];

	/* init OTP */
	writel(PDSTB_DEEP_STANDBY_ENABLE, &regs->pdstb);
	writel(PTRIM_ENABLE_INPUT, &regs->ptrim);
	writel(PCE_ENABLE_INPUT, &regs->pce);

	/* read all requested fuses */
	for (unsigned int i = 0; i < fusecount; i++, fuseidx++) {
	writel(fuseidx, &regs->pa);

	/* cycle clock to read */
	writel(PCLK_ENABLE_VAL, &regs->pclk);
	ndelay(TCD_DELAY * 1000);
	writel(PCLK_DISABLE_VAL, &regs->pclk);
	ndelay(TKL_DELAY * 1000);

	/* read the value */
	fusebuf[i] = readl(&regs->pdout);
	}

	/* shut down */
	writel(PCE_DISABLE_INPUT, &regs->pce);
	writel(PTRIM_DISABLE_INPUT, &regs->ptrim);
	writel(PDSTB_DEEP_STANDBY_DISABLE, &regs->pdstb);

	/* copy out */
	memcpy(buf, fusebuf, size);

	return size;
	}

	/*
	* Caution:
	* OTP can be written only once, so use carefully.
	*
	* offset and size are assumed aligned to the size of the fuses (32-bit).
	*/
	static int sifive_otp_write(struct udevice *dev, int offset,
	const void *buf, int size)
	{
	struct sifive_otp_plat *plat = dev_get_plat(dev);
	struct sifive_otp_regs regs = (struct sifive_otp_regs )plat->regs;

	/* Check if offset and size are multiple of BYTES_PER_FUSE */
	if ((size % BYTES_PER_FUSE) \|\| (offset % BYTES_PER_FUSE)) {
	printf("%s: size and offset must be multiple of 4.\n",
	__func__);
	return -EINVAL;
	}

	int fuseidx = offset / BYTES_PER_FUSE;
	int fusecount = size / BYTES_PER_FUSE;
	u32 write_buf = (u32 )buf;
	u32 write_data;
	int i, pas, bit;

	/* check bounds */
	if (offset < 0 \|\| size < 0)
	return -EINVAL;
	if (fuseidx >= plat->total_fuses)
	return -EINVAL;
	if ((fuseidx + fusecount) > plat->total_fuses)
	return -EINVAL;

	/* init OTP */
	writel(PDSTB_DEEP_STANDBY_ENABLE, &regs->pdstb);
	writel(PTRIM_ENABLE_INPUT, &regs->ptrim);

	/* reset registers */
	writel(PCLK_DISABLE_VAL, &regs->pclk);
	writel(PA_RESET_VAL, &regs->pa);
	writel(PAS_RESET_VAL, &regs->pas);
	writel(PAIO_RESET_VAL, &regs->paio);
	writel(PDIN_RESET_VAL, &regs->pdin);
	writel(PWE_WRITE_DISABLE, &regs->pwe);
	writel(PTM_FUSE_PROGRAM_VAL, &regs->ptm);
	ndelay(TMS_DELAY * 1000);

	writel(PCE_ENABLE_INPUT, &regs->pce);
	writel(PPROG_ENABLE_INPUT, &regs->pprog);

	/* write all requested fuses */
	for (i = 0; i < fusecount; i++, fuseidx++) {
	writel(fuseidx, &regs->pa);
	write_data = *(write_buf++);

	for (pas = 0; pas < 2; pas++) {
	writel(pas, &regs->pas);

	for (bit = 0; bit < 32; bit++) {
	writel(bit, &regs->paio);
	writel(((write_data >> bit) & 1),
	&regs->pdin);
	ndelay(TASP_DELAY * 1000);

	writel(PWE_WRITE_ENABLE, &regs->pwe);
	udelay(TPW_DELAY);
	writel(PWE_WRITE_DISABLE, &regs->pwe);
	udelay(TPWI_DELAY);
	}
	}

	writel(PAS_RESET_VAL, &regs->pas);
	}

	/* shut down */
	writel(PWE_WRITE_DISABLE, &regs->pwe);
	writel(PPROG_DISABLE_INPUT, &regs->pprog);
	writel(PCE_DISABLE_INPUT, &regs->pce);
	writel(PTM_RESET_VAL, &regs->ptm);

	writel(PTRIM_DISABLE_INPUT, &regs->ptrim);
	writel(PDSTB_DEEP_STANDBY_DISABLE, &regs->pdstb);

	return size;
	}

	static int sifive_otp_of_to_plat(struct udevice *dev)
	{
	struct sifive_otp_plat *plat = dev_get_plat(dev);
	int ret;

	plat->regs = dev_read_addr_ptr(dev);

	ret = dev_read_u32(dev, "fuse-count", &plat->total_fuses);
	if (ret < 0) {
	pr_err("\"fuse-count\" not found\n");
	return ret;
	}

	return 0;
	}

	static const struct misc_ops sifive_otp_ops = {
	.read = sifive_otp_read,
	.write = sifive_otp_write,
	};

	static const struct udevice_id sifive_otp_ids[] = {
	{ .compatible = "sifive,fu540-c000-otp" },
	{}
	};

	U_BOOT_DRIVER(sifive_otp) = {
	.name = "sifive_otp",
	.id = UCLASS_MISC,
	.of_match = sifive_otp_ids,
	.of_to_plat = sifive_otp_of_to_plat,
	.plat_auto = sizeof(struct sifive_otp_plat),
	.ops = &sifive_otp_ops,
	};