| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC |
| * |
| * Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries |
| * |
| * Author: Eugen Hristev <eugen.hristev@microchip.com> |
| * Author: Claudiu Beznea <claudiu.beznea@microchip.com> |
| * |
| */ |
| |
| #include "skeleton.dtsi" |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clk/at91.h> |
| #include <dt-bindings/dma/at91.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/mfd/at91-usart.h> |
| |
| / { |
| model = "Microchip SAMA7G5 family SoC"; |
| compatible = "microchip,sama7g5"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&gic>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x0>; |
| clocks = <&pmc PMC_TYPE_CORE 8>, <&pmc PMC_TYPE_CORE 22>, <&main_xtal>; |
| clock-names = "cpu", "master", "xtal"; |
| operating-points-v2 = <&cpu_opp_table>; |
| }; |
| }; |
| |
| cpu_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-90000000 { |
| opp-hz = /bits/ 64 <90000000>; |
| opp-microvolt = <1050000 1050000 1225000>; |
| clock-latency-ns = <320000>; |
| }; |
| |
| opp-250000000 { |
| opp-hz = /bits/ 64 <250000000>; |
| opp-microvolt = <1050000 1050000 1225000>; |
| clock-latency-ns = <320000>; |
| }; |
| |
| opp-600000000 { |
| opp-hz = /bits/ 64 <600000000>; |
| opp-microvolt = <1050000 1050000 1225000>; |
| clock-latency-ns = <320000>; |
| opp-suspend; |
| }; |
| |
| opp-800000000 { |
| opp-hz = /bits/ 64 <800000000>; |
| opp-microvolt = <1150000 1125000 1225000>; |
| clock-latency-ns = <320000>; |
| }; |
| |
| opp-1000000002 { |
| opp-hz = /bits/ 64 <1000000002>; |
| opp-microvolt = <1250000 1225000 1300000>; |
| clock-latency-ns = <320000>; |
| }; |
| }; |
| |
| clocks { |
| slow_rc_osc: slow_rc_osc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32000>; |
| }; |
| |
| main_rc: main_rc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <12000000>; |
| }; |
| |
| slow_xtal: slow_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| |
| main_xtal: main_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| |
| usb_clk: usb_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <48000000>; |
| }; |
| }; |
| |
| vddout25: fixed-regulator-vddout25 { |
| compatible = "regulator-fixed"; |
| |
| regulator-name = "VDDOUT25"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-boot-on; |
| status = "disabled"; |
| }; |
| |
| ns_sram: sram@100000 { |
| compatible = "mmio-sram"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x100000 0x20000>; |
| ranges; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| nfc_sram: sram@600000 { |
| compatible = "mmio-sram"; |
| no-memory-wc; |
| reg = <0x00600000 0x2400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x00600000 0x2400>; |
| }; |
| |
| nfc_io: nfc-io@10000000 { |
| compatible = "atmel,sama5d3-nfc-io", "syscon"; |
| reg = <0x10000000 0x8000000>; |
| }; |
| |
| ebi: ebi@40000000 { |
| compatible = "atmel,sama5d3-ebi"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| atmel,smc = <&hsmc>; |
| reg = <0x40000000 0x20000000>; |
| ranges = <0x0 0x0 0x40000000 0x8000000 |
| 0x1 0x0 0x48000000 0x8000000 |
| 0x2 0x0 0x50000000 0x8000000 |
| 0x3 0x0 0x58000000 0x8000000>; |
| clocks = <&pmc PMC_TYPE_CORE 23>; /* PMC_MCK1 */ |
| status = "disabled"; |
| |
| nand_controller: nand-controller { |
| compatible = "atmel,sama5d3-nand-controller"; |
| atmel,nfc-sram = <&nfc_sram>; |
| atmel,nfc-io = <&nfc_io>; |
| ecc-engine = <&pmecc>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges; |
| status = "disabled"; |
| }; |
| }; |
| |
| securam: securam@e0000000 { |
| compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram"; |
| reg = <0xe0000000 0x4000>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0xe0000000 0x4000>; |
| no-memory-wc; |
| }; |
| |
| secumod: secumod@e0004000 { |
| compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon"; |
| reg = <0xe0004000 0x4000>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| sfrbu: sfr@e0008000 { |
| compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon"; |
| reg = <0xe0008000 0x20>; |
| }; |
| |
| pioA: pinctrl@e0014000 { |
| compatible = "microchip,sama7g5-pinctrl"; |
| reg = <0xe0014000 0x800>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; |
| }; |
| |
| pmc: pmc@e0018000 { |
| compatible = "microchip,sama7g5-pmc", "syscon"; |
| reg = <0xe0018000 0x200>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| #clock-cells = <2>; |
| clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>, <&main_rc>; |
| clock-names = "td_slck", "md_slck", "main_xtal", "main_rc"; |
| }; |
| |
| reset_controller: reset-controller@e001d000 { |
| compatible = "microchip,sama7g5-rstc"; |
| reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>; |
| #reset-cells = <1>; |
| clocks = <&clk32k 0>; |
| }; |
| |
| shdwc: shdwc@e001d010 { |
| compatible = "microchip,sama7g5-shdwc", "syscon"; |
| reg = <0xe001d010 0x10>; |
| clocks = <&clk32k 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| atmel,wakeup-rtc-timer; |
| atmel,wakeup-rtt-timer; |
| status = "disabled"; |
| }; |
| |
| rtt: rtc@e001d020 { |
| compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; |
| reg = <0xe001d020 0x30>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk32k 0>; |
| }; |
| |
| clk32k: clock-controller@e001d050 { |
| compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc"; |
| reg = <0xe001d050 0x4>; |
| clocks = <&slow_rc_osc>, <&slow_xtal>; |
| #clock-cells = <1>; |
| }; |
| |
| gpbr: gpbr@e001d060 { |
| compatible = "microchip,sama7g5-gpbr", "syscon"; |
| reg = <0xe001d060 0x48>; |
| }; |
| |
| rtc: rtc@e001d0a8 { |
| compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc"; |
| reg = <0xe001d0a8 0x30>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk32k 1>; |
| }; |
| |
| ps_wdt: watchdog@e001d180 { |
| compatible = "microchip,sama7g5-wdt"; |
| reg = <0xe001d180 0x24>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk32k 0>; |
| }; |
| |
| chipid@e0020000 { |
| compatible = "microchip,sama7g5-chipid"; |
| reg = <0xe0020000 0x8>; |
| }; |
| |
| tcb1: timer@e0800000 { |
| compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xe0800000 0x100>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>; |
| clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; |
| }; |
| |
| hsmc: hsmc@e0808000 { |
| compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd"; |
| reg = <0xe0808000 0x1000>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| pmecc: ecc-engine@e0808070 { |
| compatible = "atmel,sama5d2-pmecc"; |
| reg = <0xe0808070 0x490>, |
| <0xe0808500 0x200>; |
| }; |
| }; |
| |
| qspi0: spi@e080c000 { |
| compatible = "microchip,sama7g5-ospi"; |
| reg = <0xe080c000 0x400>, <0x20000000 0x10000000>; |
| reg-names = "qspi_base", "qspi_mmap"; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(41)>, |
| <&dma0 AT91_XDMAC_DT_PERID(40)>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>; |
| clock-names = "pclk", "gclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 78>; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| qspi1: spi@e0810000 { |
| compatible = "microchip,sama7g5-qspi"; |
| reg = <0xe0810000 0x400>, <0x30000000 0x10000000>; |
| reg-names = "qspi_base", "qspi_mmap"; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(43)>, |
| <&dma0 AT91_XDMAC_DT_PERID(42)>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>; |
| clock-names = "pclk", "gclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 79>; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| can0: can@e0828000 { |
| compatible = "bosch,m_can"; |
| reg = <0xe0828000 0x100>, <0x100000 0x7800>; |
| reg-names = "m_can", "message_ram"; |
| interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "int0", "int1"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>; |
| clock-names = "hclk", "cclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 61>; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */ |
| assigned-clock-rates = <40000000>; |
| bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>; |
| status = "disabled"; |
| }; |
| |
| can1: can@e082c000 { |
| compatible = "bosch,m_can"; |
| reg = <0xe082c000 0x100>, <0x100000 0xbc00>; |
| reg-names = "m_can", "message_ram"; |
| interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "int0", "int1"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>; |
| clock-names = "hclk", "cclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 62>; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */ |
| assigned-clock-rates = <40000000>; |
| bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>; |
| status = "disabled"; |
| }; |
| |
| can2: can@e0830000 { |
| compatible = "bosch,m_can"; |
| reg = <0xe0830000 0x100>, <0x100000 0x10000>; |
| reg-names = "m_can", "message_ram"; |
| interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "int0", "int1"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>; |
| clock-names = "hclk", "cclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 63>; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */ |
| assigned-clock-rates = <40000000>; |
| bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>; |
| status = "disabled"; |
| }; |
| |
| can3: can@e0834000 { |
| compatible = "bosch,m_can"; |
| reg = <0xe0834000 0x100>, <0x110000 0x4400>; |
| reg-names = "m_can", "message_ram"; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "int0", "int1"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>; |
| clock-names = "hclk", "cclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 64>; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */ |
| assigned-clock-rates = <40000000>; |
| bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>; |
| status = "disabled"; |
| }; |
| |
| can4: can@e0838000 { |
| compatible = "bosch,m_can"; |
| reg = <0xe0838000 0x100>, <0x110000 0x8800>; |
| reg-names = "m_can", "message_ram"; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "int0", "int1"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>; |
| clock-names = "hclk", "cclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 65>; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */ |
| assigned-clock-rates = <40000000>; |
| bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>; |
| status = "disabled"; |
| }; |
| |
| can5: can@e083c000 { |
| compatible = "bosch,m_can"; |
| reg = <0xe083c000 0x100>, <0x110000 0xcc00>; |
| reg-names = "m_can", "message_ram"; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "int0", "int1"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>; |
| clock-names = "hclk", "cclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 66>; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */ |
| assigned-clock-rates = <40000000>; |
| bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>; |
| status = "disabled"; |
| }; |
| |
| adc: adc@e1000000 { |
| compatible = "microchip,sama7g5-adc"; |
| reg = <0xe1000000 0x200>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_GCK 26>; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 26>; |
| assigned-clock-rates = <100000000>; |
| clock-names = "adc_clk"; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>; |
| dma-names = "rx"; |
| atmel,min-sample-rate-hz = <200000>; |
| atmel,max-sample-rate-hz = <20000000>; |
| atmel,startup-time-ms = <4>; |
| status = "disabled"; |
| }; |
| |
| sdmmc0: mmc@e1204000 { |
| compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; |
| reg = <0xe1204000 0x4000>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>; |
| clock-names = "hclock", "multclk"; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */ |
| assigned-clocks = <&pmc PMC_TYPE_GCK 80>; |
| assigned-clock-rates = <200000000>; |
| microchip,sdcal-inverted; |
| status = "disabled"; |
| }; |
| |
| sdmmc1: mmc@e1208000 { |
| compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; |
| reg = <0xe1208000 0x4000>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>; |
| clock-names = "hclock", "multclk"; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */ |
| assigned-clocks = <&pmc PMC_TYPE_GCK 81>; |
| assigned-clock-rates = <200000000>; |
| microchip,sdcal-inverted; |
| status = "disabled"; |
| }; |
| |
| sdmmc2: mmc@e120c000 { |
| compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; |
| reg = <0xe120c000 0x4000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>; |
| clock-names = "hclock", "multclk"; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div */ |
| assigned-clocks = <&pmc PMC_TYPE_GCK 82>; |
| assigned-clock-rates = <200000000>; |
| microchip,sdcal-inverted; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@e1604000 { |
| compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm"; |
| reg = <0xe1604000 0x4000>; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| #pwm-cells = <3>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 77>; |
| status = "disabled"; |
| }; |
| |
| pdmc0: sound@e1608000 { |
| compatible = "microchip,sama7g5-pdmc"; |
| reg = <0xe1608000 0x1000>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| #sound-dai-cells = <0>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>; |
| dma-names = "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>; |
| clock-names = "pclk", "gclk"; |
| status = "disabled"; |
| }; |
| |
| pdmc1: sound@e160c000 { |
| compatible = "microchip,sama7g5-pdmc"; |
| reg = <0xe160c000 0x1000>; |
| interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| #sound-dai-cells = <0>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>; |
| dma-names = "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>; |
| clock-names = "pclk", "gclk"; |
| status = "disabled"; |
| }; |
| |
| spdifrx: spdifrx@e1614000 { |
| #sound-dai-cells = <0>; |
| compatible = "microchip,sama7g5-spdifrx"; |
| reg = <0xe1614000 0x4000>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>; |
| dma-names = "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>; |
| clock-names = "pclk", "gclk"; |
| status = "disabled"; |
| }; |
| |
| spdiftx: spdiftx@e1618000 { |
| #sound-dai-cells = <0>; |
| compatible = "microchip,sama7g5-spdiftx"; |
| reg = <0xe1618000 0x4000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>; |
| dma-names = "tx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>; |
| clock-names = "pclk", "gclk"; |
| }; |
| |
| i2s0: i2s@e161c000 { |
| compatible = "microchip,sama7g5-i2smcc"; |
| #sound-dai-cells = <0>; |
| reg = <0xe161c000 0x4000>; |
| interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>; |
| clock-names = "pclk", "gclk"; |
| status = "disabled"; |
| }; |
| |
| i2s1: i2s@e1620000 { |
| compatible = "microchip,sama7g5-i2smcc"; |
| #sound-dai-cells = <0>; |
| reg = <0xe1620000 0x4000>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>; |
| clock-names = "pclk", "gclk"; |
| status = "disabled"; |
| }; |
| |
| eic: interrupt-controller@e1628000 { |
| compatible = "microchip,sama7g5-eic"; |
| reg = <0xe1628000 0xec>; |
| interrupt-parent = <&gic>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; |
| clock-names = "pclk"; |
| status = "disabled"; |
| }; |
| |
| pit64b0: timer@e1800000 { |
| compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b"; |
| reg = <0xe1800000 0x4000>; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>; |
| clock-names = "pclk", "gclk"; |
| }; |
| |
| pit64b1: timer@e1804000 { |
| compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b"; |
| reg = <0xe1804000 0x4000>; |
| interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>; |
| clock-names = "pclk", "gclk"; |
| }; |
| |
| aes: crypto@e1810000 { |
| compatible = "atmel,at91sam9g46-aes"; |
| reg = <0xe1810000 0x100>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 27>; |
| clock-names = "aes_clk"; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>, |
| <&dma0 AT91_XDMAC_DT_PERID(2)>; |
| dma-names = "tx", "rx"; |
| }; |
| |
| sha: crypto@e1814000 { |
| compatible = "atmel,at91sam9g46-sha"; |
| reg = <0xe1814000 0x100>; |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 83>; |
| clock-names = "sha_clk"; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>; |
| dma-names = "tx"; |
| }; |
| |
| flx0: flexcom@e1818000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe1818000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe1818000 0x800>; |
| status = "disabled"; |
| |
| uart0: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; |
| clock-names = "usart"; |
| dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>, |
| <&dma1 AT91_XDMAC_DT_PERID(5)>; |
| dma-names = "tx", "rx"; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx1: flexcom@e181c000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe181c000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe181c000 0x800>; |
| status = "disabled"; |
| |
| i2c1: i2c@600 { |
| compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; |
| atmel,fifo-size = <32>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, |
| <&dma0 AT91_XDMAC_DT_PERID(7)>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx3: flexcom@e1824000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe1824000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe1824000 0x800>; |
| status = "disabled"; |
| |
| uart3: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; |
| clock-names = "usart"; |
| dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>, |
| <&dma1 AT91_XDMAC_DT_PERID(11)>; |
| dma-names = "tx", "rx"; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| status = "disabled"; |
| }; |
| }; |
| |
| trng: rng@e2010000 { |
| compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng"; |
| reg = <0xe2010000 0x100>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 97>; |
| status = "disabled"; |
| }; |
| |
| tdes: crypto@e2014000 { |
| compatible = "atmel,at91sam9g46-tdes"; |
| reg = <0xe2014000 0x100>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 96>; |
| clock-names = "tdes_clk"; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>, |
| <&dma0 AT91_XDMAC_DT_PERID(53)>; |
| dma-names = "tx", "rx"; |
| }; |
| |
| flx4: flexcom@e2018000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe2018000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe2018000 0x800>; |
| status = "disabled"; |
| |
| uart4: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; |
| clock-names = "usart"; |
| dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>, |
| <&dma1 AT91_XDMAC_DT_PERID(13)>; |
| dma-names = "tx", "rx"; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx7: flexcom@e2024000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe2024000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe2024000 0x800>; |
| status = "disabled"; |
| |
| uart7: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; |
| clock-names = "usart"; |
| dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>, |
| <&dma1 AT91_XDMAC_DT_PERID(19)>; |
| dma-names = "tx", "rx"; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| }; |
| |
| gmac0: ethernet@e2800000 { |
| compatible = "cdns,sama7g5-gem"; |
| reg = <0xe2800000 0x1000>; |
| interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>; |
| clock-names = "pclk", "hclk", "tx_clk", "tsu_clk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 51>; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 21>; /* eth pll div. */ |
| assigned-clock-rates = <125000000>; |
| status = "disabled"; |
| }; |
| |
| gmac1: ethernet@e2804000 { |
| compatible = "cdns,sama7g5-emac"; |
| reg = <0xe2804000 0x1000>; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>; |
| clock-names = "pclk", "hclk"; |
| status = "disabled"; |
| }; |
| |
| dma0: dma-controller@e2808000 { |
| compatible = "microchip,sama7g5-dma"; |
| reg = <0xe2808000 0x1000>; |
| interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; |
| clock-names = "dma_clk"; |
| status = "disabled"; |
| }; |
| |
| dma1: dma-controller@e280c000 { |
| compatible = "microchip,sama7g5-dma"; |
| reg = <0xe280c000 0x1000>; |
| interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; |
| clock-names = "dma_clk"; |
| status = "disabled"; |
| }; |
| |
| /* Place dma2 here despite it's address */ |
| dma2: dma-controller@e1200000 { |
| compatible = "microchip,sama7g5-dma"; |
| reg = <0xe1200000 0x1000>; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; |
| clock-names = "dma_clk"; |
| dma-requests = <0>; |
| status = "disabled"; |
| }; |
| |
| tcb0: timer@e2814000 { |
| compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xe2814000 0x100>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>; |
| clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; |
| }; |
| |
| flx8: flexcom@e2818000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe2818000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 46>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe2818000 0x800>; |
| status = "disabled"; |
| |
| i2c8: i2c@600 { |
| compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 46>; |
| atmel,fifo-size = <32>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, |
| <&dma0 AT91_XDMAC_DT_PERID(21)>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx9: flexcom@e281c000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe281c000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe281c000 0x800>; |
| status = "disabled"; |
| |
| i2c9: i2c@600 { |
| compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; |
| atmel,fifo-size = <32>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, |
| <&dma0 AT91_XDMAC_DT_PERID(23)>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx10: flexcom@e2820000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe2820000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 48>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe2820000 0x800>; |
| status = "disabled"; |
| |
| i2c10: i2c@600 { |
| compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 48>; |
| atmel,fifo-size = <32>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>, |
| <&dma0 AT91_XDMAC_DT_PERID(25)>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx11: flexcom@e2824000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe2824000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 49>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe2824000 0x800>; |
| status = "disabled"; |
| |
| spi11: spi@400 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0x400 0x200>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 49>; |
| clock-names = "spi_clk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| atmel,fifo-size = <32>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>, |
| <&dma0 AT91_XDMAC_DT_PERID(27)>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| }; |
| |
| uddrc: uddrc@e3800000 { |
| compatible = "microchip,sama7g5-uddrc"; |
| reg = <0xe3800000 0x4000>; |
| }; |
| |
| ddr3phy: ddr3phy@e3804000 { |
| compatible = "microchip,sama7g5-ddr3phy"; |
| reg = <0xe3804000 0x1000>; |
| }; |
| |
| gic: interrupt-controller@e8c11000 { |
| compatible = "arm,cortex-a7-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0xe8c11000 0x1000>, |
| <0xe8c12000 0x2000>; |
| }; |
| }; |
| }; |