| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * sam9x60.dtsi - Device Tree Include file for SAM9X60 SoC. |
| * |
| * Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries |
| * |
| * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com> |
| */ |
| |
| #include "skeleton.dtsi" |
| #include <dt-bindings/dma/at91.h> |
| #include <dt-bindings/pinctrl/at91.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/clk/at91.h> |
| |
| /{ |
| model = "Microchip SAM9X60 SoC"; |
| compatible = "microchip,sam9x60"; |
| |
| aliases { |
| serial0 = &dbgu; |
| gpio0 = &pioA; |
| gpio1 = &pioB; |
| gpio2 = &pioC; |
| gpio3 = &pioD; |
| spi0 = &qspi; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ARM9260_0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,arm926ej-s"; |
| clocks = <&pmc PMC_TYPE_CORE 19>, <&pmc PMC_TYPE_CORE 11>, <&main_xtal>; |
| clock-names = "cpu", "master", "xtal"; |
| }; |
| }; |
| |
| clocks { |
| slow_rc_osc: slow_rc_osc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <18500>; |
| }; |
| |
| main_rc: main_rc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <12000000>; |
| }; |
| |
| slow_xtal: slow_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| |
| main_xtal: main_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| ahb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| usb1: usb@600000 { |
| compatible = "atmel,at91rm9200-ohci", "usb-ohci"; |
| reg = <0x00600000 0x100000>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 21>; |
| clock-names = "ohci_clk", "hclk", "uhpck"; |
| status = "disabled"; |
| }; |
| |
| usb2: usb@700000 { |
| compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; |
| reg = <0x00700000 0x100000>; |
| clocks = <&pmc PMC_TYPE_CORE 8>, <&pmc PMC_TYPE_PERIPHERAL 22>; |
| clock-names = "usb_clk", "ehci_clk"; |
| assigned-clocks = <&pmc PMC_TYPE_CORE 8>; |
| assigned-clock-rates = <480000000>; |
| status = "disabled"; |
| }; |
| |
| ebi: ebi@10000000 { |
| compatible = "microchip,sam9x60-ebi"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| atmel,smc = <&smc>; |
| microchip,sfr = <&sfr>; |
| reg = <0x10000000 0x60000000>; |
| ranges = <0x0 0x0 0x10000000 0x10000000 |
| 0x1 0x0 0x20000000 0x10000000 |
| 0x2 0x0 0x30000000 0x10000000 |
| 0x3 0x0 0x40000000 0x10000000 |
| 0x4 0x0 0x50000000 0x10000000 |
| 0x5 0x0 0x60000000 0x10000000>; |
| clocks = <&pmc PMC_TYPE_CORE 11>; |
| status = "disabled"; |
| |
| nand_controller: nand-controller { |
| compatible = "microchip,sam9x60-nand-controller"; |
| ecc-engine = <&pmecc>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges; |
| status = "disabled"; |
| }; |
| }; |
| |
| sdhci0: sdhci-host@80000000 { |
| compatible = "microchip,sam9x60-sdhci"; |
| reg = <0x80000000 0x300>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>; |
| clock-names = "hclock", "multclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 12>; |
| assigned-clock-rates = <100000000>; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* ID_PLL_A_DIV */ |
| bus-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sdhci0>; |
| }; |
| |
| sdhci1: sdhci-host@90000000 { |
| compatible = "microchip,sam9x60-sdhci"; |
| reg = <0x90000000 0x300>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>; |
| clock-names = "hclock", "multclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 26>; |
| assigned-clock-rates = <100000000>; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* ID_PLL_A_DIV */ |
| bus-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sdhci1>; |
| }; |
| |
| apb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| qspi: spi@f0014000 { |
| compatible = "microchip,sam9x60-qspi"; |
| reg = <0xf0014000 0x100>, <0x70000000 0x10000000>; |
| reg-names = "qspi_base", "qspi_mmap"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 18>; /* ID_QSPI */ |
| clock-names = "pclk", "qspick"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| pit64b0: timer@f0028000 { |
| compatible = "microchip,sam9x60-pit64b"; |
| reg = <0xf0028000 0xec>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>; |
| clock-names = "pclk", "gclk"; |
| }; |
| |
| flx0: flexcom@f801c600 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xf801c000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xf801c000 0x800>; |
| status = "disabled"; |
| }; |
| |
| macb0: ethernet@f802c000 { |
| compatible = "cdns,sam9x60-macb", "cdns,macb"; |
| reg = <0xf802c000 0x100>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_macb0_rmii>; |
| clock-names = "hclk", "pclk"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>; |
| status = "disabled"; |
| }; |
| |
| sfr: sfr@f8050000 { |
| compatible = "microchip,sam9x60-sfr", "syscon"; |
| reg = <0xf8050000 0x100>; |
| }; |
| |
| pmecc: ecc-engine@ffffe000 { |
| compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc"; |
| reg = <0xffffe000 0x300>, |
| <0xffffe600 0x100>; |
| }; |
| |
| smc: smc@ffffea00 { |
| compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon"; |
| reg = <0xffffea00 0x100>; |
| }; |
| |
| dbgu: serial@fffff200 { |
| compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; |
| reg = <0xfffff200 0x200>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_dbgu>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; |
| clock-names = "usart"; |
| }; |
| |
| pinctrl: pinctrl@fffff400 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "microchip,sam9x60-pinctrl", "simple-bus"; |
| ranges = <0xfffff400 0xfffff400 0x800>; |
| reg = <0xfffff400 0x200 /* pioA */ |
| 0xfffff600 0x200 /* pioB */ |
| 0xfffff800 0x200 /* pioC */ |
| 0xfffffa00 0x200>; /* pioD */ |
| |
| /* shared pinctrl settings */ |
| dbgu { |
| pinctrl_dbgu: dbgu-0 { |
| atmel,pins = |
| <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP |
| AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| }; |
| }; |
| |
| macb0 { |
| pinctrl_macb0_rmii: macb0_rmii-0 { |
| atmel,pins = |
| <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ |
| AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ |
| AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */ |
| AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ |
| AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ |
| AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ |
| AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ |
| AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ |
| AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ |
| AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ |
| }; |
| }; |
| |
| sdhci0 { |
| pinctrl_sdhci0: sdhci0 { |
| atmel,pins = |
| <AT91_PIOA 17 AT91_PERIPH_A |
| (AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA17 CK periph A with pullup */ |
| AT91_PIOA 16 AT91_PERIPH_A |
| (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA16 CMD periph A with pullup */ |
| AT91_PIOA 15 AT91_PERIPH_A |
| (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA15 DAT0 periph A */ |
| AT91_PIOA 18 AT91_PERIPH_A |
| (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA18 DAT1 periph A with pullup */ |
| AT91_PIOA 19 AT91_PERIPH_A |
| (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA19 DAT2 periph A with pullup */ |
| AT91_PIOA 20 AT91_PERIPH_A |
| (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA20 DAT3 periph A with pullup */ |
| }; |
| }; |
| |
| sdhci1 { |
| pinctrl_sdhci1: sdhci1 { |
| atmel,pins = |
| <AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA13 CK periph B */ |
| AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA12 CMD periph B with pullup */ |
| AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA11 DAT0 periph B with pullup */ |
| AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA2 DAT1 periph B with pullup */ |
| AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA3 DAT2 periph B with pullup */ |
| AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA4 DAT3 periph B with pullup */ |
| }; |
| }; |
| }; |
| |
| pioA: gpio@fffff400 { |
| compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| reg = <0xfffff400 0x200>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; |
| }; |
| |
| pioB: gpio@fffff600 { |
| compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| reg = <0xfffff600 0x200>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; |
| }; |
| |
| pioC: gpio@fffff800 { |
| compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| reg = <0xfffff800 0x200>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; |
| }; |
| |
| pioD: gpio@fffffa00 { |
| compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| reg = <0xfffffa00 0x200>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; |
| }; |
| |
| pmc: pmc@fffffc00 { |
| compatible = "microchip,sam9x60-pmc"; |
| reg = <0xfffffc00 0x200>; |
| #clock-cells = <2>; |
| clocks = <&clk32 1>, <&clk32 0>, <&main_xtal>, <&main_rc>; |
| clock-names = "td_slck", "md_slck", "main_xtal", "main_rc"; |
| status = "okay"; |
| }; |
| |
| reset_controller: rstc@fffffe00 { |
| compatible = "microchip,sam9x60-rstc"; |
| reg = <0xfffffe00 0x10>; |
| clocks = <&clk32 0>; |
| }; |
| |
| pit: timer@fffffe40 { |
| compatible = "atmel,at91sam9260-pit"; |
| reg = <0xfffffe40 0x10>; |
| clocks = <&pmc PMC_TYPE_CORE 11>; /* ID_MCK. */ |
| }; |
| |
| clk32: sckc@fffffe50 { |
| compatible = "microchip,sam9x60-sckc"; |
| reg = <0xfffffe50 0x4>; |
| clocks = <&slow_rc_osc>, <&slow_xtal>; |
| #clock-cells = <1>; |
| }; |
| }; |
| }; |
| |
| onewire_tm: onewire { |
| compatible = "w1-gpio"; |
| status = "disabled"; |
| }; |
| }; |