| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Samsung's Exynos4210 based Universal C210 board device tree source |
| * |
| * Copyright (c) 2014 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| */ |
| |
| /dts-v1/; |
| #include "exynos4210.dtsi" |
| |
| / { |
| model = "Samsung Universal C210 based on Exynos4210 rev0"; |
| compatible = "samsung,universal_c210", "samsung,exynos4210"; |
| |
| aliases { |
| serial0 = "/serial@13800000"; |
| console = "/serial@13820000"; |
| }; |
| |
| soft-spi { |
| compatible = "spi-gpio"; |
| cs-gpios = <&gpy4 3 0>; |
| gpio-sck = <&gpy3 1 0>; |
| gpio-mosi = <&gpy3 3 0>; |
| gpio-miso = <&gpy3 0 0>; |
| spi-delay-us = <1>; |
| cs@0 { |
| }; |
| }; |
| |
| fimd@11c00000 { |
| compatible = "samsung,exynos-fimd"; |
| reg = <0x11c00000 0xa4>; |
| |
| samsung,vl-freq = <60>; |
| samsung,vl-col = <480>; |
| samsung,vl-row = <800>; |
| samsung,vl-width = <480>; |
| samsung,vl-height = <800>; |
| |
| samsung,vl-clkp = <0>; |
| samsung,vl-oep = <0>; |
| samsung,vl-hsp = <1>; |
| samsung,vl-vsp = <1>; |
| samsung,vl-dp = <1>; |
| samsung,vl-bpix = <4>; |
| |
| samsung,vl-hspw = <2>; |
| samsung,vl-hbpd = <16>; |
| samsung,vl-hfpd = <16>; |
| samsung,vl-vspw = <2>; |
| samsung,vl-vbpd = <8>; |
| samsung,vl-vfpd = <8>; |
| samsung,vl-cmd-allow-len = <0xf>; |
| |
| samsung,pclk_name = <1>; |
| samsung,sclk_div = <1>; |
| |
| samsung,winid = <0>; |
| samsung,power-on-delay = <10000>; |
| samsung,interface-mode = <1>; |
| samsung,mipi-enabled = <0>; |
| samsung,dp-enabled; |
| samsung,dual-lcd-enabled; |
| |
| samsung,logo-on = <1>; |
| samsung,resolution = <0>; |
| samsung,rgb-mode = <0>; |
| }; |
| }; |
| |
| &i2c_5 { |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| max8998-pmic@66 { |
| compatible = "maxim,max8998"; |
| reg = <0x66 0 0>; |
| voltage-regulators { |
| ldo2_reg: LDO2 { |
| regulator-name = "VALIVE_1.2V"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-always-on; |
| }; |
| |
| ldo3_reg: LDO3 { |
| regulator-name = "VUSB+MIPI_1.1V"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| regulator-always-on; |
| }; |
| |
| ldo4_reg: LDO4 { |
| regulator-name = "VADC_3.3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| ldo5_reg: LDO5 { |
| regulator-name = "VTF_2.8V"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| }; |
| |
| ldo6_reg: LDO6 { |
| regulator-name = "LDO6"; |
| regulator-min-microvolt = <2000000>; |
| regulator-max-microvolt = <2000000>; |
| }; |
| |
| ldo7_reg: LDO7 { |
| regulator-name = "VLCD+VMIPI_1.8V"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| ldo8_reg: LDO8 { |
| regulator-name = "VUSB+VDAC_3.3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| ldo9_reg: LDO9 { |
| regulator-name = "VCC_2.8V"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| regulator-always-on; |
| }; |
| |
| ldo10_reg: LDO10 { |
| regulator-name = "VPLL_1.1V"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo11_reg: LDO11 { |
| regulator-name = "CAM_AF_3.3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| ldo12_reg: LDO12 { |
| regulator-name = "PS_2.8V"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| }; |
| |
| ldo13_reg: LDO13 { |
| regulator-name = "VHIC_1.2V"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| ldo14_reg: LDO14 { |
| regulator-name = "CAM_I_HOST_1.8V"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| ldo15_reg: LDO15 { |
| regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| ldo16_reg: LDO16 { |
| regulator-name = "CAM_S_ANA_2.8V"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| }; |
| |
| ldo17_reg: LDO17 { |
| regulator-name = "VCC_3.0V_LCD"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| |
| buck1_reg: BUCK1 { |
| regulator-name = "VINT_1.1V"; |
| regulator-min-microvolt = <750000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| buck2_reg: BUCK2 { |
| regulator-name = "VG3D_1.1V"; |
| regulator-min-microvolt = <750000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-boot-on; |
| }; |
| |
| buck3_reg: BUCK3 { |
| regulator-name = "VCC_1.8V"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| |
| buck4_reg: BUCK4 { |
| regulator-name = "VMEM_1.2V"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-always-on; |
| }; |
| |
| ap32khz_reg: EN32KHz-AP { |
| regulator-name = "32KHz AP"; |
| regulator-always-on; |
| }; |
| |
| cp32khz_reg: EN32KHz-CP { |
| regulator-name = "32KHz CP"; |
| }; |
| |
| vichg_reg: ENVICHG { |
| regulator-name = "VICHG"; |
| }; |
| |
| safeout1_reg: ESAFEOUT1 { |
| regulator-name = "SAFEOUT1"; |
| }; |
| |
| safeout2_reg: ESAFEOUT2 { |
| regulator-name = "SAFEOUT2"; |
| regulator-boot-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &sdhci0 { |
| bus-width = <8>; |
| pwr-gpios = <&gpk0 2 0>; |
| status = "okay"; |
| }; |
| |
| &sdhci2 { |
| bus-width = <4>; |
| cd-gpios = <&gpx3 4 0>; |
| status = "okay"; |
| }; |