ARM: uniphier: dts: sync with Linux 4.20
Currently, the DWC3 USB node is out of sync because the bindings
for the UniPhier DWC3 PHY diverged between Linux and U-Boot.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/arch/arm/dts/uniphier-pro4.dtsi b/arch/arm/dts/uniphier-pro4.dtsi
index 8974844..ef34208 100644
--- a/arch/arm/dts/uniphier-pro4.dtsi
+++ b/arch/arm/dts/uniphier-pro4.dtsi
@@ -71,6 +71,17 @@
cache-level = <2>;
};
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
@@ -317,6 +328,8 @@
<&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
+ phy-names = "usb";
+ phys = <&usb_phy0>;
has-transaction-translator;
};
@@ -331,6 +344,8 @@
<&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
+ phy-names = "usb";
+ phys = <&usb_phy1>;
has-transaction-translator;
};
@@ -342,6 +357,34 @@
pinctrl: pinctrl {
compatible = "socionext,uniphier-pro4-pinctrl";
};
+
+ usb-phy {
+ compatible = "socionext,uniphier-pro4-usb2-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <0>;
+ vbus-supply = <&usb0_vbus>;
+ };
+
+ usb_phy3: phy@3 {
+ reg = <3>;
+ #phy-cells = <0>;
+ vbus-supply = <&usb1_vbus>;
+ };
+ };
};
soc-glue@5f900000 {
@@ -434,6 +477,60 @@
};
};
+ _usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb0_rst 4>;
+ phys = <&usb_phy2>, <&usb0_ssphy>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pro4-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x100>;
+
+ usb0_vbus: regulator@0 {
+ compatible = "socionext,uniphier-pro4-usb3-regulator";
+ reg = <0 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+
+ usb0_ssphy: ss-phy@10 {
+ compatible = "socionext,uniphier-pro4-usb3-ssphy";
+ reg = <0x10 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ vbus-supply = <&usb0_vbus>;
+ };
+
+ usb0_rst: reset@40 {
+ compatible = "socionext,uniphier-pro4-usb3-reset";
+ reg = <0x40 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+ };
+
+ /* FIXME: U-Boot own node */
usb0: usb@65b00000 {
compatible = "socionext,uniphier-pro4-dwc3";
status = "disabled";
@@ -452,6 +549,49 @@
};
};
+ _usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb1_rst 4>;
+ phys = <&usb_phy3>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pro4-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x100>;
+
+ usb1_vbus: regulator@0 {
+ compatible = "socionext,uniphier-pro4-usb3-regulator";
+ reg = <0 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+
+ usb1_rst: reset@40 {
+ compatible = "socionext,uniphier-pro4-usb3-reset";
+ reg = <0x40 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+ };
+
+ /* FIXME: U-Boot own node */
usb1: usb@65d00000 {
compatible = "socionext,uniphier-pro4-dwc3";
status = "disabled";
@@ -478,7 +618,8 @@
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};