diff --git a/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso b/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso
index 92f4190..d7535a7 100644
--- a/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -139,7 +139,7 @@
 	bus-width = <4>;
 };
 
-&gem3 { /* required by spec */
+&gem3 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem3_default>;
@@ -166,9 +166,28 @@
 	};
 };
 
-&pinctrl0 { /* required by spec */
+&pinctrl0 {
 	status = "okay";
 
+	pinctrl_gpio0_default: gpio0-default {
+                conf {
+                        groups = "gpio0_38_grp";
+                        bias-pull-up;
+                        power-source = <IO_STANDARD_LVCMOS18>;
+                };
+
+                mux {
+                        groups = "gpio0_38_grp";
+                        function = "gpio0";
+                };
+
+                conf-tx {
+                        pins = "MIO38";
+                        bias-disable;
+                        output-enable;
+                };
+        };
+
 	pinctrl_uart1_default: uart1-default {
 		conf {
 			groups = "uart1_9_grp";
@@ -185,6 +204,7 @@
 		conf-tx {
 			pins = "MIO36";
 			bias-disable;
+			output-enable;
 		};
 
 		mux {
@@ -207,7 +227,7 @@
 		};
 	};
 
-	pinctrl_i2c1_gpio: i2c1-gpio {
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		conf {
 			groups = "gpio0_24_grp", "gpio0_25_grp";
 			slew-rate = <SLEW_RATE_SLOW>;
@@ -236,6 +256,7 @@
 		conf-bootstrap {
 			pins = "MIO71", "MIO73", "MIO75";
 			bias-disable;
+			output-enable;
 			low-power-disable;
 		};
 
@@ -243,6 +264,7 @@
 			pins = "MIO64", "MIO65", "MIO66",
 				"MIO67", "MIO68", "MIO69";
 			bias-disable;
+			output-enable;
 			low-power-enable;
 		};
 
@@ -251,6 +273,7 @@
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			bias-disable;
+			output-enable;
 		};
 
 		mux-mdio {
@@ -281,6 +304,7 @@
 			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
 			"MIO60", "MIO61", "MIO62", "MIO63";
 			bias-disable;
+			output-enable;
 			drive-strength = <4>;
 			slew-rate = <SLEW_RATE_SLOW>;
 		};
@@ -319,6 +343,12 @@
 	};
 };
 
+&gpio {
+        status = "okay";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
 &uart1 {
 	status = "okay";
 	pinctrl-names = "default";