diff --git a/Bindings/regulator/ti,tps65132.yaml b/Bindings/regulator/ti,tps65132.yaml
new file mode 100644
index 0000000..6a6d1a3
--- /dev/null
+++ b/Bindings/regulator/ti,tps65132.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps65132.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS65132 Dual Output Power Regulators
+
+maintainers:
+  - devicetree@vger.kernel.org
+
+description: |
+  The TPS65132 is designed to supply positive/negative driven applications.
+
+  Datasheet is available at:
+  https://www.ti.com/lit/gpn/tps65132
+
+properties:
+  compatible:
+    enum:
+      - ti,tps65132
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^out[pn]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single regulator.
+
+    properties:
+      enable-gpios:
+        maxItems: 1
+        description:
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+      active-discharge-gpios:
+        maxItems: 1
+        description:
+          GPIO specifier to actively discharge the delay mechanism.
+
+      ti,active-discharge-time-us:
+        description: Regulator active discharge time in microseconds.
+
+    dependencies:
+      active-discharge-gpios: [ 'ti,active-discharge-time-us' ]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@3e {
+            compatible = "ti,tps65132";
+            reg = <0x3e>;
+
+            outp {
+                regulator-name = "outp";
+                regulator-boot-on;
+                regulator-always-on;
+                enable-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+            };
+
+            outn {
+                regulator-name = "outn";
+                regulator-boot-on;
+                regulator-always-on;
+                regulator-active-discharge = <0>;
+                enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>;
+            };
+        };
+    };