diff --git a/Bindings/mfd/atmel,hlcdc.yaml b/Bindings/mfd/atmel,hlcdc.yaml
new file mode 100644
index 0000000..4aa3690
--- /dev/null
+++ b/Bindings/mfd/atmel,hlcdc.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's HLCD Controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two
+  subdevices, a PWM chip and a Display Controller.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9n12-hlcdc
+      - atmel,at91sam9x5-hlcdc
+      - atmel,sama5d2-hlcdc
+      - atmel,sama5d3-hlcdc
+      - atmel,sama5d4-hlcdc
+      - microchip,sam9x60-hlcdc
+      - microchip,sam9x75-xlcdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: periph_clk
+      - const: sys_clk
+      - const: slow_clk
+      - const: lvds_pll_clk
+    minItems: 3
+
+  display-controller:
+    $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml
+
+  pwm:
+    $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    lcd_controller: lcd-controller@f0030000 {
+      compatible = "atmel,sama5d3-hlcdc";
+      reg = <0xf0030000 0x2000>;
+      clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+      clock-names = "periph_clk", "sys_clk", "slow_clk";
+      interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+
+      display-controller {
+        compatible = "atmel,hlcdc-display-controller";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0>;
+
+          hlcdc_panel_output: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&panel_input>;
+          };
+        };
+      };
+
+      pwm {
+        compatible = "atmel,hlcdc-pwm";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_pwm>;
+        #pwm-cells = <3>;
+      };
+    };