diff --git a/Bindings/display/atmel/atmel,hlcdc-display-controller.yaml b/Bindings/display/atmel/atmel,hlcdc-display-controller.yaml
new file mode 100644
index 0000000..29ed424
--- /dev/null
+++ b/Bindings/display/atmel/atmel,hlcdc-display-controller.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel/atmel,hlcdc-display-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's High LCD Controller (HLCDC)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The LCD Controller (LCDC) consists of logic for transferring LCD image
+  data from an external display buffer to a TFT LCD panel. The LCDC has one
+  display input buffer per layer that fetches pixels through the single bus
+  host interface and a look-up table to allow palletized display
+  configurations.
+
+properties:
+  compatible:
+    const: atmel,hlcdc-display-controller
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      reg:
+        maxItems: 1
+
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+        description:
+          Endpoint connecting the LCD panel signals.
+
+        properties:
+          bus-width:
+            enum: [ 12, 16, 18, 24 ]
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - compatible
+  - port@0
+
+additionalProperties: false
diff --git a/Bindings/display/atmel/hlcdc-dc.txt b/Bindings/display/atmel/hlcdc-dc.txt
deleted file mode 100644
index 923aea2..0000000
--- a/Bindings/display/atmel/hlcdc-dc.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
-
-The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
-See ../../mfd/atmel-hlcdc.txt for more details.
-
-Required properties:
- - compatible: value should be "atmel,hlcdc-display-controller"
- - pinctrl-names: the pin control state names. Should contain "default".
- - pinctrl-0: should contain the default pinctrl states.
- - #address-cells: should be set to 1.
- - #size-cells: should be set to 0.
-
-Required children nodes:
- Children nodes are encoding available output ports and their connections
- to external devices using the OF graph representation (see ../graph.txt).
- At least one port node is required.
-
-Optional properties in grandchild nodes:
- Any endpoint grandchild node may specify a desired video interface
- according to ../../media/video-interfaces.txt, specifically
- - bus-width: recognized values are <12>, <16>, <18> and <24>, and
-   override any output mode selection heuristic, forcing "rgb444",
-   "rgb565", "rgb666" and "rgb888" respectively.
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-
-		hlcdc-display-controller {
-			compatible = "atmel,hlcdc-display-controller";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				hlcdc_panel_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
-
-Example 2: With a video interface override to force rgb565; as above
-but with these changes/additions:
-
-	&hlcdc {
-		hlcdc-display-controller {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
-
-			port@0 {
-				hlcdc_panel_output: endpoint@0 {
-					bus-width = <16>;
-				};
-			};
-		};
-	};
diff --git a/Bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml b/Bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
new file mode 100644
index 0000000..3791c9f
--- /dev/null
+++ b/Bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8mp-hdmi-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DWC HDMI TX Encoder
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HDMI transmitter is a Synopsys DesignWare
+  HDMI 2.0a TX controller IP.
+
+allOf:
+  - $ref: /schemas/display/bridge/synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mp-hdmi-tx
+
+  reg-io-width:
+    const: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: iahb
+      - const: isfr
+      - const: cec
+      - const: pix
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI output port
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    hdmi@32fd8000 {
+        compatible = "fsl,imx8mp-hdmi-tx";
+        reg = <0x32fd8000 0x7eff>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+                 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+                 <&clk IMX8MP_CLK_32K>,
+                 <&hdmi_tx_phy>;
+        clock-names = "iahb", "isfr", "cec", "pix";
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+        reg-io-width = <1>;
+        ports {
+           #address-cells = <1>;
+           #size-cells = <0>;
+           port@0 {
+             reg = <0>;
+
+             hdmi_tx_from_pvi: endpoint {
+               remote-endpoint = <&pvi_to_hdmi_tx>;
+             };
+          };
+
+          port@1 {
+            reg = <1>;
+              hdmi_tx_out: endpoint {
+                remote-endpoint = <&hdmi0_con>;
+              };
+          };
+        };
+    };
diff --git a/Bindings/display/bridge/ti,sn65dsi86.yaml b/Bindings/display/bridge/ti,sn65dsi86.yaml
index 6ec6d28..c93878b 100644
--- a/Bindings/display/bridge/ti,sn65dsi86.yaml
+++ b/Bindings/display/bridge/ti,sn65dsi86.yaml
@@ -7,7 +7,7 @@
 title: SN65DSI86 DSI to eDP bridge chip
 
 maintainers:
-  - Sandeep Panda <spanda@codeaurora.org>
+  - Douglas Anderson <dianders@chromium.org>
 
 description: |
   The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
diff --git a/Bindings/display/fsl,lcdif.yaml b/Bindings/display/fsl,lcdif.yaml
index 1c2be8d..0681fc4 100644
--- a/Bindings/display/fsl,lcdif.yaml
+++ b/Bindings/display/fsl,lcdif.yaml
@@ -123,10 +123,16 @@
   - if:
       properties:
         compatible:
+          const: fsl,imx6sx-lcdif
+    then:
+      required:
+        - power-domains
+  - if:
+      properties:
+        compatible:
           contains:
             enum:
               - fsl,imx6sl-lcdif
-              - fsl,imx6sx-lcdif
               - fsl,imx8mm-lcdif
               - fsl,imx8mn-lcdif
               - fsl,imx8mp-lcdif
diff --git a/Bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml b/Bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
new file mode 100644
index 0000000..56da163
--- /dev/null
+++ b/Bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP HDMI Parallel Video Interface
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The HDMI parallel video interface is a timing and sync generator block in the
+  i.MX8MP SoC, that sits between the video source and the HDMI TX controller.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-hdmi-pvi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input from the LCDIF controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output to the HDMI TX controller.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    display-bridge@32fc4000 {
+        compatible = "fsl,imx8mp-hdmi-pvi";
+        reg = <0x32fc4000 0x44>;
+        interrupt-parent = <&irqsteer_hdmi>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                pvi_from_lcdif3: endpoint {
+                    remote-endpoint = <&lcdif3_to_pvi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                pvi_to_hdmi_tx: endpoint {
+                    remote-endpoint = <&hdmi_tx_from_pvi>;
+                };
+            };
+        };
+    };
diff --git a/Bindings/display/msm/dsi-controller-main.yaml b/Bindings/display/msm/dsi-controller-main.yaml
index 4219936..1fa28e9 100644
--- a/Bindings/display/msm/dsi-controller-main.yaml
+++ b/Bindings/display/msm/dsi-controller-main.yaml
@@ -19,6 +19,7 @@
               - qcom,msm8916-dsi-ctrl
               - qcom,msm8953-dsi-ctrl
               - qcom,msm8974-dsi-ctrl
+              - qcom,msm8976-dsi-ctrl
               - qcom,msm8996-dsi-ctrl
               - qcom,msm8998-dsi-ctrl
               - qcom,qcm2290-dsi-ctrl
@@ -248,6 +249,7 @@
           contains:
             enum:
               - qcom,msm8953-dsi-ctrl
+              - qcom,msm8976-dsi-ctrl
     then:
       properties:
         clocks:
diff --git a/Bindings/display/msm/gmu.yaml b/Bindings/display/msm/gmu.yaml
index 4e1c25b..b383736 100644
--- a/Bindings/display/msm/gmu.yaml
+++ b/Bindings/display/msm/gmu.yaml
@@ -224,6 +224,7 @@
             enum:
               - qcom,adreno-gmu-730.1
               - qcom,adreno-gmu-740.1
+              - qcom,adreno-gmu-750.1
     then:
       properties:
         reg:
diff --git a/Bindings/display/msm/gpu.yaml b/Bindings/display/msm/gpu.yaml
index b019db9..40b5c6b 100644
--- a/Bindings/display/msm/gpu.yaml
+++ b/Bindings/display/msm/gpu.yaml
@@ -23,7 +23,7 @@
           The driver is parsing the compat string for Adreno to
           figure out the gpu-id and patch level.
         items:
-          - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]$'
+          - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]+$'
           - const: qcom,adreno
       - description: |
           The driver is parsing the compat string for Imageon to
@@ -127,7 +127,7 @@
       properties:
         compatible:
           contains:
-            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$'
+            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]+$'
 
     then:
       properties:
@@ -203,7 +203,7 @@
         properties:
           compatible:
             contains:
-              pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]$'
+              pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]+$'
 
       then: # Starting with A6xx, the clocks are usually defined in the GMU node
         properties:
diff --git a/Bindings/display/msm/qcom,mdss.yaml b/Bindings/display/msm/qcom,mdss.yaml
index 0999ea0..e457654 100644
--- a/Bindings/display/msm/qcom,mdss.yaml
+++ b/Bindings/display/msm/qcom,mdss.yaml
@@ -127,6 +127,7 @@
           - qcom,dsi-phy-20nm
           - qcom,dsi-phy-28nm-8226
           - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-hpm-fam-b
           - qcom,dsi-phy-28nm-lp
           - qcom,hdmi-phy-8084
           - qcom,hdmi-phy-8660
diff --git a/Bindings/display/msm/qcom,sm8150-mdss.yaml b/Bindings/display/msm/qcom,sm8150-mdss.yaml
index c0d6a4f..e6dc549 100644
--- a/Bindings/display/msm/qcom,sm8150-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm8150-mdss.yaml
@@ -53,6 +53,15 @@
       compatible:
         const: qcom,sm8150-dpu
 
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sm8150-dp
+
   "^dsi@[0-9a-f]+$":
     type: object
     additionalProperties: true
diff --git a/Bindings/display/msm/qcom,sm8650-dpu.yaml b/Bindings/display/msm/qcom,sm8650-dpu.yaml
index a01d15a..c4087cc 100644
--- a/Bindings/display/msm/qcom,sm8650-dpu.yaml
+++ b/Bindings/display/msm/qcom,sm8650-dpu.yaml
@@ -13,7 +13,9 @@
 
 properties:
   compatible:
-    const: qcom,sm8650-dpu
+    enum:
+      - qcom,sm8650-dpu
+      - qcom,x1e80100-dpu
 
   reg:
     items:
diff --git a/Bindings/display/msm/qcom,sm8650-mdss.yaml b/Bindings/display/msm/qcom,sm8650-mdss.yaml
index bd11119..24cece1 100644
--- a/Bindings/display/msm/qcom,sm8650-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm8650-mdss.yaml
@@ -37,18 +37,21 @@
 patternProperties:
   "^display-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dpu
 
   "^displayport-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dp
 
   "^dsi@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         items:
@@ -57,6 +60,7 @@
 
   "^phy@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dsi-phy-4nm
diff --git a/Bindings/display/msm/qcom,x1e80100-mdss.yaml b/Bindings/display/msm/qcom,x1e80100-mdss.yaml
new file mode 100644
index 0000000..3b01a0e
--- /dev/null
+++ b/Bindings/display/msm/qcom,x1e80100-mdss.yaml
@@ -0,0 +1,251 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,x1e80100-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 Display MDSS
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+
+description:
+  X1E80100 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DP interfaces, etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,x1e80100-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dp
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dp-phy
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+    #include <dt-bindings/phy/phy-qcom-qmp.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,x1e80100-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+                        <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_DISPLAY_CFG 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem", "cpu-cfg";
+
+        resets = <&dispcc_core_bcr>;
+
+        power-domains = <&dispcc_gdsc>;
+
+        clocks = <&dispcc_ahb_clk>,
+                 <&gcc_disp_hf_axi_clk>,
+                 <&dispcc_mdp_clk>;
+        clock-names = "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,x1e80100-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc_axi_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&dispcc_mdp_lut_clk>,
+                     <&dispcc_mdp_clk>,
+                     <&dispcc_mdp_vsync_clk>;
+            clock-names = "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_mdp_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,x1e80100-dp";
+            reg = <0 0xae90000 0 0x200>,
+                  <0 0xae90200 0 0x200>,
+                  <0 0xae90400 0 0x600>,
+                  <0 0xae91000 0 0x400>,
+                  <0 0xae91400 0 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+               <&dispcc_dptx0_aux_clk>,
+               <&dispcc_dptx0_link_clk>,
+               <&dispcc_dptx0_link_intf_clk>,
+               <&dispcc_dptx0_pixel0_clk>;
+            clock-names = "core_iface", "core_aux",
+                    "ctrl_link",
+                    "ctrl_link_iface",
+                    "stream_pixel";
+
+            assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
+                  <&dispcc_mdss_dptx0_pixel0_clk_src>;
+            assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+                  <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+            operating-points-v2 = <&mdss_dp0_opp_table>;
+
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>;
+            phy-names = "dp";
+
+            #sound-dai-cells = <0>;
+
+            ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                  reg = <0>;
+
+                  mdss_dp0_in: endpoint {
+                    remote-endpoint = <&mdss_intf0_out>;
+                  };
+              };
+
+              port@1 {
+                  reg = <1>;
+
+                  mdss_dp0_out: endpoint {
+                  };
+              };
+            };
+
+            mdss_dp0_opp_table: opp-table {
+              compatible = "operating-points-v2";
+
+              opp-160000000 {
+                 opp-hz = /bits/ 64 <160000000>;
+                 required-opps = <&rpmhpd_opp_low_svs>;
+              };
+
+              opp-270000000 {
+                 opp-hz = /bits/ 64 <270000000>;
+                 required-opps = <&rpmhpd_opp_svs>;
+              };
+
+              opp-540000000 {
+                 opp-hz = /bits/ 64 <540000000>;
+                 required-opps = <&rpmhpd_opp_svs_l1>;
+              };
+
+              opp-810000000 {
+                 opp-hz = /bits/ 64 <810000000>;
+                 required-opps = <&rpmhpd_opp_nom>;
+              };
+            };
+        };
+    };
+...
diff --git a/Bindings/display/panel/boe,th101mb31ig002-28a.yaml b/Bindings/display/panel/boe,th101mb31ig002-28a.yaml
new file mode 100644
index 0000000..32df26c
--- /dev/null
+++ b/Bindings/display/panel/boe,th101mb31ig002-28a.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,th101mb31ig002-28a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TH101MB31IG002-28A WXGA DSI Display Panel
+
+maintainers:
+  - Manuel Traut <manut@mecka.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+        # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
+      - boe,th101mb31ig002-28a
+
+  reg: true
+  backlight: true
+  enable-gpios: true
+  power-supply: true
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,th101mb31ig002-28a";
+            reg = <0>;
+            backlight = <&backlight_lcd0>;
+            enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+            rotation = <90>;
+            power-supply = <&vcc_3v3>;
+            port {
+                panel_in_dsi: endpoint {
+                    remote-endpoint = <&dsi_out_con>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Bindings/display/panel/himax,hx83112a.yaml b/Bindings/display/panel/himax,hx83112a.yaml
new file mode 100644
index 0000000..174661d
--- /dev/null
+++ b/Bindings/display/panel/himax,hx83112a.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83112a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83112A-based DSI display panels
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description:
+  The Himax HX83112A is a generic DSI Panel IC used to control
+  LCD panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: djn,9a-3r063-1102b
+
+  vdd1-supply:
+    description: Digital voltage rail
+
+  vsn-supply:
+    description: Positive source voltage rail
+
+  vsp-supply:
+    description: Negative source voltage rail
+
+  reg: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd1-supply
+  - vsn-supply
+  - vsp-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "djn,9a-3r063-1102b";
+            reg = <0>;
+
+            backlight = <&pm6150l_wled>;
+            reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+            vdd1-supply = <&vreg_l1e>;
+            vsn-supply = <&pm6150l_lcdb_ncp>;
+            vsp-supply = <&pm6150l_lcdb_ldo>;
+
+            port {
+                panel_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Bindings/display/panel/leadtek,ltk500hd1829.yaml b/Bindings/display/panel/leadtek,ltk500hd1829.yaml
index c5944b4..d589f16 100644
--- a/Bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/Bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -14,7 +14,9 @@
 
 properties:
   compatible:
-    const: leadtek,ltk500hd1829
+    enum:
+      - leadtek,ltk101b4029w
+      - leadtek,ltk500hd1829
   reg: true
   backlight: true
   reset-gpios: true
diff --git a/Bindings/display/panel/novatek,nt35510.yaml b/Bindings/display/panel/novatek,nt35510.yaml
index bc92928..91921f4 100644
--- a/Bindings/display/panel/novatek,nt35510.yaml
+++ b/Bindings/display/panel/novatek,nt35510.yaml
@@ -15,7 +15,9 @@
 properties:
   compatible:
     items:
-      - const: hydis,hva40wv1
+      - enum:
+          - frida,frd400b25025
+          - hydis,hva40wv1
       - const: novatek,nt35510
     description: This indicates the panel manufacturer of the panel
       that is in turn using the NT35510 panel driver. The compatible
@@ -29,6 +31,7 @@
   vddi-supply:
     description: regulator that supplies the vddi voltage
   backlight: true
+  port: true
 
 required:
   - compatible
diff --git a/Bindings/display/panel/novatek,nt36672e.yaml b/Bindings/display/panel/novatek,nt36672e.yaml
new file mode 100644
index 0000000..dc4672f
--- /dev/null
+++ b/Bindings/display/panel/novatek,nt36672e.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36672e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36672E LCD DSI Panel
+
+maintainers:
+  - Ritesh Kumar <quic_riteshk@quicinc.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: novatek,nt36672e
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddi-supply: true
+  avdd-supply: true
+  avee-supply: true
+  port: true
+  reset-gpios: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - vddi-supply
+  - avdd-supply
+  - avee-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "novatek,nt36672e";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+
+            vddi-supply = <&vreg_l8c_1p8>;
+            avdd-supply = <&disp_avdd>;
+            avee-supply = <&disp_avee>;
+
+            backlight = <&pwm_backlight>;
+
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Bindings/display/panel/panel-lvds.yaml b/Bindings/display/panel/panel-lvds.yaml
index 9f10165..155d8ff 100644
--- a/Bindings/display/panel/panel-lvds.yaml
+++ b/Bindings/display/panel/panel-lvds.yaml
@@ -39,9 +39,13 @@
   compatible:
     items:
       - enum:
+          # Admatec 9904379 10.1" 1024x600 LVDS panel
+          - admatec,9904379
           - auo,b101ew05
           # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel
           - chunghwa,claa070wp03xg
+          # EDT ETML0700Z9NDHA 7.0" WSVGA (1024x600) color TFT LCD LVDS panel
+          - edt,etml0700z9ndha
           # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel
           - hannstar,hsd101pww2
           # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel
diff --git a/Bindings/display/panel/panel-simple.yaml b/Bindings/display/panel/panel-simple.yaml
index 634a10c..a95445f 100644
--- a/Bindings/display/panel/panel-simple.yaml
+++ b/Bindings/display/panel/panel-simple.yaml
@@ -73,6 +73,8 @@
       - auo,t215hvn01
         # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
       - avic,tm070ddh03
+        # BOE BP082WX1-100 8.2" WXGA (1280x800) LVDS panel
+      - boe,bp082wx1-100
         # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel
       - boe,bp101wx1-100
         # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
@@ -141,6 +143,8 @@
       - edt,etm0700g0edh6
         # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch
       - edt,etml0700y5dha
+        # Emerging Display Technology Corp. 10.1" LVDS WXGA TFT Display with capacitive touch
+      - edt,etml1010g3dra
         # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
         # capacitive touch
       - edt,etmv570g2dhu
diff --git a/Bindings/display/panel/rocktech,jh057n00900.yaml b/Bindings/display/panel/rocktech,jh057n00900.yaml
index 97cccd8..6ec4712 100644
--- a/Bindings/display/panel/rocktech,jh057n00900.yaml
+++ b/Bindings/display/panel/rocktech,jh057n00900.yaml
@@ -22,6 +22,8 @@
     enum:
       # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
       - anbernic,rg353v-panel-v2
+      # Powkiddy RGB10MAX3 5.0" 720x1280 TFT LCD panel
+      - powkiddy,rgb10max3-panel
       # Powkiddy RGB30 3.0" 720x720 TFT LCD panel
       - powkiddy,rgb30-panel
       # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
@@ -43,6 +45,7 @@
   reset-gpios: true
 
   backlight: true
+  rotation: true
 
 required:
   - compatible
diff --git a/Bindings/display/panel/visionox,r66451.yaml b/Bindings/display/panel/visionox,r66451.yaml
index 6ba3236..187840b 100644
--- a/Bindings/display/panel/visionox,r66451.yaml
+++ b/Bindings/display/panel/visionox,r66451.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml#
diff --git a/Bindings/display/panel/visionox,rm69299.yaml b/Bindings/display/panel/visionox,rm69299.yaml
index fa745a6..7723990 100644
--- a/Bindings/display/panel/visionox,rm69299.yaml
+++ b/Bindings/display/panel/visionox,rm69299.yaml
@@ -7,7 +7,8 @@
 title: Visionox model RM69299 Panels
 
 maintainers:
-  - Harigovindan P <harigovi@codeaurora.org>
+  - Abhinav Kumar <quic_abhinavk@quicinc.com>
+  - Jessica Zhang <quic_jesszhan@quicinc.com>
 
 description: |
   This binding is for display panels using a Visionox RM692999 panel.
diff --git a/Bindings/display/renesas,rzg2l-du.yaml b/Bindings/display/renesas,rzg2l-du.yaml
new file mode 100644
index 0000000..08e5b94
--- /dev/null
+++ b/Bindings/display/renesas,rzg2l-du.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,rzg2l-du.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Display Unit (DU)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  These DT bindings describe the Display Unit embedded in the Renesas RZ/G2L
+  and RZ/V2L SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - renesas,r9a07g044-du # RZ/G2{L,LC}
+      - items:
+          - enum:
+              - renesas,r9a07g054-du    # RZ/V2L
+          - const: renesas,r9a07g044-du # RZ/G2L fallback
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock
+      - description: Register access clock
+      - description: Video clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: pclk
+      - const: vclk
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      The connections to the DU output video ports are modeled using the OF
+      graph bindings. The number of ports and their assignment are
+      model-dependent. Each port shall have a single endpoint.
+
+    patternProperties:
+      "^port@[0-1]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+
+    required:
+      - port@0
+
+    unevaluatedProperties: false
+
+  renesas,vsps:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle to VSP instance that serves the DU channel
+        - description: Channel index identifying the LIF instance in that VSP
+    description:
+      A list of phandle and channel index tuples to the VSPs that handle the
+      memory interfaces for the DU channels.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - power-domains
+  - ports
+  - renesas,vsps
+
+additionalProperties: false
+
+examples:
+  # RZ/G2L DU
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display@10890000 {
+        compatible = "renesas,r9a07g044-du";
+        reg = <0x10890000 0x10000>;
+        interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+                 <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+                 <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+        clock-names = "aclk", "pclk", "vclk";
+        resets = <&cpg R9A07G044_LCDC_RESET_N>;
+        power-domains = <&cpg>;
+
+        renesas,vsps = <&vspd0 0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+...
diff --git a/Bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 7e59dee..af638b6 100644
--- a/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -94,11 +94,14 @@
       - const: default
       - const: unwedge
 
+  power-domains:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
-    patternProperties:
-      "^port(@0)?$":
+    properties:
+      port@0:
         $ref: /schemas/graph.yaml#/properties/port
         description: Input of the DWC HDMI TX
         properties:
@@ -108,11 +111,14 @@
             description: Connection to the VOPB
           endpoint@1:
             description: Connection to the VOPL
-    properties:
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description: Output of the DWC HDMI TX
 
+    required:
+      - port@0
+      - port@1
+
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -135,19 +141,25 @@
     #include <dt-bindings/clock/rk3288-cru.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3288-power.h>
 
     hdmi: hdmi@ff980000 {
         compatible = "rockchip,rk3288-dw-hdmi";
         reg = <0xff980000 0x20000>;
         reg-io-width = <4>;
-        ddc-i2c-bus = <&i2c5>;
-        rockchip,grf = <&grf>;
         interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
         clock-names = "iahb", "isfr";
+        ddc-i2c-bus = <&i2c5>;
+        power-domains = <&power RK3288_PD_VIO>;
+        rockchip,grf = <&grf>;
 
         ports {
-            port {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
                 #address-cells = <1>;
                 #size-cells = <0>;
 
@@ -155,11 +167,20 @@
                     reg = <0>;
                     remote-endpoint = <&vopb_out_hdmi>;
                 };
+
                 hdmi_in_vopl: endpoint@1 {
                     reg = <1>;
                     remote-endpoint = <&vopl_out_hdmi>;
                 };
             };
+
+            port@1 {
+                reg = <1>;
+
+                hdmi_out_con: endpoint {
+                    remote-endpoint = <&hdmi_con_in>;
+                };
+            };
         };
     };
 
diff --git a/Bindings/display/solomon,ssd1307fb.yaml b/Bindings/display/solomon,ssd1307fb.yaml
index 3afbb52..153ff86 100644
--- a/Bindings/display/solomon,ssd1307fb.yaml
+++ b/Bindings/display/solomon,ssd1307fb.yaml
@@ -131,9 +131,9 @@
             const: sinowealth,sh1106
     then:
       properties:
-        width:
+        solomon,width:
           default: 132
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
@@ -149,9 +149,9 @@
               - solomon,ssd1305
     then:
       properties:
-        width:
+        solomon,width:
           default: 132
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
@@ -167,9 +167,9 @@
               - solomon,ssd1306
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
@@ -185,9 +185,9 @@
               - solomon,ssd1307
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 39
         solomon,dclk-div:
           default: 2
@@ -205,9 +205,9 @@
               - solomon,ssd1309
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
diff --git a/Bindings/display/solomon,ssd132x.yaml b/Bindings/display/solomon,ssd132x.yaml
index 37975ee..dd79399 100644
--- a/Bindings/display/solomon,ssd132x.yaml
+++ b/Bindings/display/solomon,ssd132x.yaml
@@ -30,9 +30,9 @@
             const: solomon,ssd1322
     then:
       properties:
-        width:
+        solomon,width:
           default: 480
-        height:
+        solomon,height:
           default: 128
 
   - if:
@@ -42,9 +42,9 @@
             const: solomon,ssd1325
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 80
 
   - if:
@@ -54,9 +54,9 @@
             const: solomon,ssd1327
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 128
 
 unevaluatedProperties: false
diff --git a/Bindings/display/solomon,ssd133x.yaml b/Bindings/display/solomon,ssd133x.yaml
new file mode 100644
index 0000000..b778003
--- /dev/null
+++ b/Bindings/display/solomon,ssd133x.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd133x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD133x OLED Display Controllers
+
+maintainers:
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+allOf:
+  - $ref: solomon,ssd-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - solomon,ssd1331
+
+  solomon,width:
+    default: 96
+
+  solomon,height:
+    default: 64
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        oled@0 {
+            compatible = "solomon,ssd1331";
+            reg = <0x0>;
+            reset-gpios = <&gpio2 7>;
+            dc-gpios = <&gpio2 8>;
+            spi-max-frequency = <10000000>;
+        };
+    };
diff --git a/Bindings/display/ti/ti,am65x-dss.yaml b/Bindings/display/ti/ti,am65x-dss.yaml
index b6767ef..55e3e49 100644
--- a/Bindings/display/ti/ti,am65x-dss.yaml
+++ b/Bindings/display/ti/ti,am65x-dss.yaml
@@ -37,6 +37,7 @@
       - description: OVR2 overlay manager for vp2
       - description: VP1 video port 1
       - description: VP2 video port 2
+      - description: common1 DSS register area
 
   reg-names:
     items:
@@ -47,6 +48,7 @@
       - const: ovr2
       - const: vp1
       - const: vp2
+      - const: common1
 
   clocks:
     items:
@@ -147,9 +149,10 @@
                     <0x04a07000 0x1000>, /* ovr1 */
                     <0x04a08000 0x1000>, /* ovr2 */
                     <0x04a0a000 0x1000>, /* vp1 */
-                    <0x04a0b000 0x1000>; /* vp2 */
+                    <0x04a0b000 0x1000>, /* vp2 */
+                    <0x04a01000 0x1000>; /* common1 */
             reg-names = "common", "vidl1", "vid",
-                    "ovr1", "ovr2", "vp1", "vp2";
+                    "ovr1", "ovr2", "vp1", "vp2", "common1";
             ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
             power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
             clocks =        <&k3_clks 67 1>,