// SPDX-License-Identifier: GPL-2.0-only

/dts-v1/;

#include "msm8916-pm8916.dtsi"
#include "msm8916-modem-qdsp6.dtsi"

#include <dt-bindings/gpio/gpio.h>

/ {
	model = "LG K10 (K420n)";
	compatible = "lg,m216", "qcom,msm8916";
	chassis-type = "handset";

	aliases {
		mmc0 = &sdhc_1; /* eMMC */
		mmc1 = &sdhc_2; /* SD card */
		serial0 = &blsp_uart2;
	};

	chosen {
		stdout-path = "serial0";
	};

	battery: battery {
		compatible = "simple-battery";
		voltage-min-design-microvolt = <3300000>;
		voltage-max-design-microvolt = <4350000>;
		energy-full-design-microwatt-hours = <8800000>;
		charge-full-design-microamp-hours = <2300000>;

		ocv-capacity-celsius = <25>;
		ocv-capacity-table-0 = <4342000 100>, <4266000 95>, <4206000 90>,
			<4148000 85>, <4094000 80>, <4046000 75>, <3994000 70>,
			<3956000 65>, <3916000 60>, <3866000 55>, <3831000 50>,
			<3808000 45>, <3789000 40>, <3776000 35>, <3769000 30>,
			<3760000 25>, <3740000 20>, <3712000 16>, <3684000 13>,
			<3676000 11>, <3674000 10>, <3672000 9>, <3669000 8>,
			<3665000 7>, <3660000 6>, <3643000 5>, <3602000 4>,
			<3542000 3>, <3458000 2>, <3326000 1>, <3000000 0>;
	};

	gpio-keys {
		compatible = "gpio-keys";

		pinctrl-0 = <&gpio_keys_default>;
		pinctrl-names = "default";

		label = "GPIO Buttons";

		volume-up-button {
			label = "Volume Up";
			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEUP>;
		};

		volume-down-button {
			label = "Volume Down";
			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEDOWN>;
		};
	};
};

&blsp_i2c2 {
	status = "okay";

	accelerometer@11 {
		compatible = "bosch,bmc150_accel";
		reg = <0x11>;

		interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>;

		mount-matrix =	 "0", "1", "0",
				"-1", "0", "0",
				 "0", "0", "1";

		vdd-supply = <&pm8916_l17>;
		vddio-supply = <&pm8916_l6>;

		pinctrl-0 = <&accel_int_default>;
		pinctrl-names = "default";
	};

	magnetometer@13 {
		compatible = "bosch,bmc150_magn";
		reg = <0x13>;

		interrupts-extended = <&tlmm 69 IRQ_TYPE_EDGE_RISING>;

		vdd-supply = <&pm8916_l17>;
		vddio-supply = <&pm8916_l6>;

		pinctrl-0 = <&magn_int_default>;
		pinctrl-names = "default";
	};
};

&blsp_i2c5 {
	status = "okay";

	touchscreen@34 {
		compatible = "melfas,mip4_ts";
		reg = <0x34>;

		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
		ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;

		pinctrl-0 = <&touchscreen_default>;
		pinctrl-names = "default";
	};
};

&blsp_uart2 {
	status = "okay";
};

&mpss_mem {
	reg = <0x0 0x86800000 0x0 0x4a00000>;
};

&pm8916_bms {
	monitored-battery = <&battery>;
	power-supplies = <&pm8916_charger>;

	status = "okay";
};

&pm8916_charger {
	qcom,fast-charge-safe-current = <700000>;
	qcom,fast-charge-safe-voltage = <4300000>;

	monitored-battery = <&battery>;
	status = "okay";
};

&pm8916_codec {
	qcom,micbias1-ext-cap;
	qcom,micbias-lvl = <2800>;
	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
	qcom,hphl-jack-type-normally-open;
};

&pm8916_rpm_regulators {
	pm8916_l17: l17 {
		regulator-min-microvolt = <2850000>;
		regulator-max-microvolt = <2850000>;
	};
};

&pm8916_vib {
	status = "okay";
};

&sdhc_1 {
	status = "okay";
};

&sdhc_2 {
	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
	pinctrl-names = "default", "sleep";

	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;

	status = "okay";
};

&sound {
	audio-routing =
		"AMIC1", "MIC BIAS External1",
		"AMIC2", "MIC BIAS Internal2",
		"AMIC3", "MIC BIAS External1";
};

&usb {
	dr_mode = "peripheral";
	extcon = <&pm8916_charger>;
	status = "okay";
};

&usb_hs_phy {
	extcon = <&pm8916_charger>;
};

&venus {
	status = "okay";
};

&venus_mem {
	status = "okay";
};

&wcnss {
	status = "okay";
};

&wcnss_iris {
	compatible = "qcom,wcn3620";
};

&wcnss_mem {
	status = "okay";
};

&tlmm {
	accel_int_default: accel-int-default-state {
		pins = "gpio115";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	gpio_keys_default: gpio-keys-default-state {
		pins = "gpio107", "gpio108";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-up;
	};

	magn_int_default: magn-int-default-state {
		pins = "gpio69";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	sdc2_cd_default: sdc2-cd-default-state {
		pins = "gpio38";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	touchscreen_default: touchscreen-default-state {
		touchscreen-pins {
			pins = "gpio13";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};

		ce-pins {
			pins = "gpio12";
			function = "gpio";
			drive-strength = <2>;
			bias-disable;
		};
	};
};