diff --git a/src/arm64/qcom/sm8550-qrd.dts b/src/arm64/qcom/sm8550-qrd.dts
index 92f0150..774bdfc 100644
--- a/src/arm64/qcom/sm8550-qrd.dts
+++ b/src/arm64/qcom/sm8550-qrd.dts
@@ -214,6 +214,68 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en>, <&pmk8550_sleep_clk>;
+
+		wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+		/*
+		 * TODO Add bt-enable-gpios once the Bluetooth driver is
+		 * converted to using the power sequencer.
+		 */
+
+		vdd-supply = <&vreg_s5g_0p85>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_s2g_0p85>;
+		vdddig-supply = <&vreg_s4e_0p95>;
+		vddrfa1p2-supply = <&vreg_s4g_1p25>;
+		vddrfa1p8-supply = <&vreg_s6g_1p86>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -720,17 +782,6 @@
 	status = "okay";
 };
 
-&gcc {
-	clocks = <&bi_tcxo_div2>, <&sleep_clk>,
-		 <&pcie0_phy>,
-		 <&pcie1_phy>,
-		 <0>,
-		 <&ufs_mem_phy 0>,
-		 <&ufs_mem_phy 1>,
-		 <&ufs_mem_phy 2>,
-		 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
-};
-
 &gpi_dma1 {
 	status = "okay";
 };
@@ -807,11 +858,6 @@
 
 &mdss_dp0_out {
 	data-lanes = <0 1>;
-	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
-};
-
-&pcie_1_phy_aux_clk {
-	status = "disabled";
 };
 
 &pcie0 {
@@ -824,6 +870,23 @@
 	status = "okay";
 };
 
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l1e_0p88>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
@@ -907,8 +970,15 @@
 	status = "okay";
 };
 
-&pcie_1_phy_aux_clk {
-	clock-frequency = <1000>;
+&pmk8550_gpios {
+	pmk8550_sleep_clk: sleep-clk-state {
+		pins = "gpio3";
+		function = "func1";
+		input-disable;
+		output-enable;
+		bias-disable;
+		power-source = <0>;
+	};
 };
 
 &qupv3_id_0 {
@@ -955,6 +1025,7 @@
 		sound-name-prefix = "SpkrLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3g_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
 	};
 
 	/* WSA8845, Speaker South */
@@ -968,6 +1039,7 @@
 		sound-name-prefix = "SpkrRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3g_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
 	};
 };
 
@@ -1084,6 +1156,13 @@
 		bias-disable;
 		output-low;
 	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio80";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
 };
 
 &uart7 {
@@ -1135,19 +1214,10 @@
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "otg";
-	usb-role-switch;
-};
-
 &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdd-supply = <&vreg_l1e_0p88>;
 	vdda12-supply = <&vreg_l3e_1p2>;
@@ -1161,23 +1231,13 @@
 	vdda-phy-supply = <&vreg_l3e_1p2>;
 	vdda-pll-supply = <&vreg_l3f_0p88>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
-&usb_dp_qmpphy_dp_in {
-	remote-endpoint = <&mdss_dp0_out>;
-};
-
 &usb_dp_qmpphy_out {
 	remote-endpoint = <&redriver_ss_in>;
 };
 
-&usb_dp_qmpphy_usb_ss_in {
-	remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
 &xo_board {
 	clock-frequency = <76800000>;
 };