diff --git a/src/arm64/qcom/sm8450.dtsi b/src/arm64/qcom/sm8450.dtsi
index 616461f..9bafb3b 100644
--- a/src/arm64/qcom/sm8450.dtsi
+++ b/src/arm64/qcom/sm8450.dtsi
@@ -754,8 +754,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&sleep_clk>,
 				 <&pcie0_phy>,
-				 <&pcie1_phy>,
-				 <0>,
+				 <&pcie1_phy QMP_PCIE_PIPE_CLK>,
+				 <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>,
 				 <&ufs_mem_phy 0>,
 				 <&ufs_mem_phy 1>,
 				 <&ufs_mem_phy 2>,
@@ -1803,6 +1803,12 @@
 					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
 				 <&pcie0_phy>,
@@ -1845,8 +1851,35 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
 
+			operating-points-v2 = <&pcie0_opp_table>;
+
 			status = "disabled";
 
+			pcie0_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+			};
+
 			pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -1932,6 +1965,12 @@
 					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
 				 <&pcie1_phy>,
@@ -1972,8 +2011,56 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_default_state>;
 
+			operating-points-v2 = <&pcie1_opp_table>;
+
 			status = "disabled";
 
+			pcie1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 and GEN 4 x1 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+				/* GEN 4 x2 */
+				opp-32000000 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+				};
+			};
+
 			pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -2001,7 +2088,7 @@
 				      "pipe";
 
 			clock-output-names = "pcie_1_pipe_clk";
-			#clock-cells = <0>;
+			#clock-cells = <1>;
 
 			#phy-cells = <0>;
 
@@ -2304,6 +2391,8 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			orientation-switch;
+
 			status = "disabled";
 
 			ports {
@@ -2321,6 +2410,7 @@
 					reg = <1>;
 
 					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
 					};
 				};
 
@@ -2328,6 +2418,7 @@
 					reg = <2>;
 
 					usb_1_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
 					};
 				};
 			};
@@ -3119,6 +3210,14 @@
 							remote-endpoint = <&dpu_intf0_out>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_dp_in>;
+						};
+		};
 				};
 
 				dp_opp_table: opp-table {
@@ -4362,9 +4461,10 @@
 			compatible = "qcom,sm8450-llcc";
 			reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>,
 			      <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>,
-			      <0 0x19a00000 0 0x80000>;
+			      <0 0x19a00000 0 0x80000>, <0 0x19c00000 0 0x80000>;
 			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
-				    "llcc3_base", "llcc_broadcast_base";
+				    "llcc3_base", "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -4429,6 +4529,8 @@
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
 				 <&gcc GCC_UFS_0_CLKREF_EN>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
@@ -4584,6 +4686,7 @@
 						reg = <1>;
 
 						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 						};
 					};
 				};
@@ -4610,8 +4713,6 @@
 
 	thermal-zones {
 		aoss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -4630,8 +4731,6 @@
 		};
 
 		cpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
@@ -4650,8 +4749,6 @@
 		};
 
 		cpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
@@ -4670,8 +4767,6 @@
 		};
 
 		cpuss3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
@@ -4690,8 +4785,6 @@
 		};
 
 		cpuss4-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
@@ -4710,8 +4803,6 @@
 		};
 
 		cpu4-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
@@ -4736,8 +4827,6 @@
 		};
 
 		cpu4-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
@@ -4762,8 +4851,6 @@
 		};
 
 		cpu5-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
@@ -4788,8 +4875,6 @@
 		};
 
 		cpu5-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -4814,8 +4899,6 @@
 		};
 
 		cpu6-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
@@ -4840,8 +4923,6 @@
 		};
 
 		cpu6-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
@@ -4866,8 +4947,6 @@
 		};
 
 		cpu7-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
@@ -4892,8 +4971,6 @@
 		};
 
 		cpu7-middle-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
@@ -4918,8 +4995,6 @@
 		};
 
 		cpu7-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
@@ -4945,7 +5020,7 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens0 14>;
 
 			cooling-maps {
@@ -4956,35 +5031,29 @@
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				reset-mon-cfg {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
-				};
-
-				gpu_top_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens0 15>;
 
 			cooling-maps {
@@ -4995,35 +5064,27 @@
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				reset-mon-cfg {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
-				};
-
-				gpu_bottom_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		aoss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 0>;
 
 			trips {
@@ -5042,8 +5103,6 @@
 		};
 
 		cpu0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
@@ -5068,8 +5127,6 @@
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
@@ -5094,8 +5151,6 @@
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
@@ -5120,8 +5175,6 @@
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
@@ -5147,7 +5200,7 @@
 
 		cdsp0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
@@ -5179,7 +5232,7 @@
 
 		cdsp1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 6>;
 
 			trips {
@@ -5211,7 +5264,7 @@
 
 		cdsp2-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 7>;
 
 			trips {
@@ -5242,8 +5295,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
@@ -5263,7 +5314,7 @@
 
 		mem-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
@@ -5288,8 +5339,6 @@
 		};
 
 		modem0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 10>;
 
 			trips {
@@ -5320,8 +5369,6 @@
 		};
 
 		modem1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 11>;
 
 			trips {
@@ -5352,8 +5399,6 @@
 		};
 
 		modem2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 12>;
 
 			trips {
@@ -5384,8 +5429,6 @@
 		};
 
 		modem3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 13>;
 
 			trips {
@@ -5416,8 +5459,6 @@
 		};
 
 		camera0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 14>;
 
 			trips {
@@ -5436,8 +5477,6 @@
 		};
 
 		camera1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 15>;
 
 			trips {