diff --git a/Bindings/soc/fsl/bman-portals.txt b/Bindings/soc/fsl/bman-portals.txt
deleted file mode 100644
index 2a00e14..0000000
--- a/Bindings/soc/fsl/bman-portals.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-QorIQ DPAA Buffer Manager Portals Device Tree Binding
-
-Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
-
-CONTENTS
-
-	- BMan Portal
-	- Example
-
-BMan Portal Node
-
-Portals are memory mapped interfaces to BMan that allow low-latency, lock-less
-interaction by software running on processor cores, accelerators and network
-interfaces with the BMan
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,bman-portal-<hardware revision>"
-			May include "fsl,<SoC>-bman-portal" or "fsl,bman-portal"
-
-- reg
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Two regions. The first is the cache-enabled region of
-			the portal. The second is the cache-inhibited region of
-			the portal
-
-- interrupts
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Standard property
-
-EXAMPLE
-
-The example below shows a (P4080) BMan portals container/bus node with two portals
-
-	bman-portals@ff4000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0 0xf 0xf4000000 0x200000>;
-
-		bman-portal@0 {
-			compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
-			reg = <0x0 0x4000>, <0x100000 0x1000>;
-			interrupts = <105 2 0 0>;
-		};
-		bman-portal@4000 {
-			compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
-			reg = <0x4000 0x4000>, <0x101000 0x1000>;
-			interrupts = <107 2 0 0>;
-		};
-	};
diff --git a/Bindings/soc/fsl/bman.txt b/Bindings/soc/fsl/bman.txt
deleted file mode 100644
index 48eed14..0000000
--- a/Bindings/soc/fsl/bman.txt
+++ /dev/null
@@ -1,137 +0,0 @@
-QorIQ DPAA Buffer Manager Device Tree Bindings
-
-Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
-
-CONTENTS
-
-	- BMan Node
-	- BMan Private Memory Node
-	- Example
-
-BMan Node
-
-The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA).
-BMan supports hardware allocation and deallocation of buffers belonging to pools
-originally created by software with configurable depletion thresholds. This
-binding covers the CCSR space programming model
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,bman"
-			May include "fsl,<SoC>-bman"
-
-- reg
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Registers region within the CCSR address space
-
-The BMan revision information is located in the BMAN_IP_REV_1/2 registers which
-are located at offsets 0xbf8 and 0xbfc
-
-- interrupts
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Standard property. The error interrupt
-
-- fsl,bman-portals
-	Usage:		Required
-	Value type:	<phandle>
-	Definition:	Phandle to this BMan instance's portals
-
-- fsl,liodn
-	Usage:		See pamu.txt
-	Value type:	<prop-encoded-array>
-	Definition:	PAMU property used for static LIODN assignment
-
-- fsl,iommu-parent
-	Usage:		See pamu.txt
-	Value type:	<phandle>
-	Definition:	PAMU property used for dynamic LIODN assignment
-
-	For additional details about the PAMU/LIODN binding(s) see pamu.txt
-
-Devices connected to a BMan instance via Direct Connect Portals (DCP) must link
-to the respective BMan instance
-
-- fsl,bman
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Description:	List of phandle and DCP index pairs, to the BMan instance
-			to which this device is connected via the DCP
-
-BMan Private Memory Node
-
-BMan requires a contiguous range of physical memory used for the backing store
-for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as
-a node under the /reserved-memory node.
-
-The BMan FBPR memory node must be named "bman-fbpr"
-
-PROPERTIES
-
-- compatible
-	Usage:		required
-	Value type:	<stringlist>
-	Definition:	PPC platforms: Must include "fsl,bman-fbpr"
-			ARM platforms: Must include "shared-dma-pool"
-				       as well as the "no-map" property
-
-The following constraints are relevant to the FBPR private memory:
-	- The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to
-	  16 GiB
-	- The alignment must be a muliptle of the memory size
-
-The size of the FBPR must be chosen by observing the hardware features configured
-via the Reset Configuration Word (RCW) and that are relevant to a specific board
-(e.g. number of MAC(s) pinned-out, number of offline/host command FMan ports,
-etc.). The size configured in the DT must reflect the hardware capabilities and
-not the specific needs of an application
-
-For additional details about reserved memory regions see reserved-memory.txt
-
-EXAMPLE
-
-The example below shows a BMan FBPR dynamic allocation memory node
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		bman_fbpr: bman-fbpr {
-			compatible = "shared-mem-pool";
-			size = <0 0x1000000>;
-			alignment = <0 0x1000000>;
-			no-map;
-		};
-	};
-
-The example below shows a (P4080) BMan CCSR-space node
-
-	bportals: bman-portals@ff4000000 {
-		...
-	};
-
-	crypto@300000 {
-		...
-		fsl,bman = <&bman, 2>;
-		...
-	};
-
-	bman: bman@31a000 {
-		compatible = "fsl,bman";
-		reg = <0x31a000 0x1000>;
-		interrupts = <16 2 1 2>;
-		fsl,liodn = <0x17>;
-		fsl,bman-portals = <&bportals>;
-		memory-region = <&bman_fbpr>;
-	};
-
-	fman@400000 {
-		...
-		fsl,bman = <&bman, 0>;
-		...
-	};
diff --git a/Bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml b/Bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml
new file mode 100644
index 0000000..53b07d4
--- /dev/null
+++ b/Bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Firmware Node
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  This node defines a firmware binary that is embedded in the device tree, for
+  the purpose of passing the firmware from bootloader to the kernel, or from
+  the hypervisor to the guest.
+
+  The firmware node itself contains the firmware binary contents, a compatible
+  property, and any firmware-specific properties.  The node should be placed
+  inside a QE node that needs it.  Doing so eliminates the need for a
+  fsl,firmware-phandle property.  Other QE nodes that need the same firmware
+  should define an fsl,firmware-phandle property that points to the firmware node
+  in the first QE node.
+
+  The fsl,firmware property can be specified in the DTS (possibly using incbin)
+  or can be inserted by the boot loader at boot time.
+
+properties:
+  compatible:
+    enum:
+      - fsl,qe-firmware
+
+  fsl,firmware:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      A standard property.  This property contains the firmware binary "blob".
+
+required:
+  - compatible
+  - fsl,firmware
+
+additionalProperties: false
+
+examples:
+  - |
+    qe-firmware {
+        compatible = "fsl,qe-firmware";
+        fsl,firmware = <0x70 0xcd 0x00 0x00 0x01 0x46 0x45>;
+    };
diff --git a/Bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml b/Bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml
new file mode 100644
index 0000000..8267ad0
--- /dev/null
+++ b/Bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Interrupt Controller (IC)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,qe-ic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: QE interrupt
+      - description: QE critical
+      - description: QE error
+    minItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@80 {
+        compatible = "fsl,qe-ic";
+        reg = <0x80 0x80>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        interrupts = <95 2 0 0  94 2 0 0>;
+    };
diff --git a/Bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml b/Bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml
new file mode 100644
index 0000000..cf0f38d
--- /dev/null
+++ b/Bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-muram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine Multi-User RAM (MURAM)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: Multi-User RAM (MURAM)
+
+properties:
+  compatible:
+    items:
+      - const: fsl,qe-muram
+      - const: fsl,cpm-muram
+
+  ranges:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, slave]
+
+
+patternProperties:
+  '^data\-only@[a-f0-9]+$':
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: fsl,qe-muram-data
+          - const: fsl,cpm-muram-data
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    muram@10000 {
+        compatible = "fsl,qe-muram", "fsl,cpm-muram";
+        ranges = <0 0x00010000 0x0000c000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        data-only@0{
+            compatible = "fsl,qe-muram-data",
+                         "fsl,cpm-muram-data";
+            reg = <0 0xc000>;
+        };
+     };
diff --git a/Bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml b/Bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml
new file mode 100644
index 0000000..8e58ab5
--- /dev/null
+++ b/Bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-si.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Serial Interface Block (SI)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The SI manages the routing of eight TDM lines to the QE block serial drivers,
+  the MCC and the UCCs, for receive and transmit.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,ls1043-qe-si
+          - const: fsl,t1040-qe-si
+      - enum:
+          - fsl,t1040-qe-si
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    si@700 {
+        compatible = "fsl,t1040-qe-si";
+        reg = <0x700 0x80>;
+    };
diff --git a/Bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml b/Bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml
new file mode 100644
index 0000000..cc4ed48
--- /dev/null
+++ b/Bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-siram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Serial Interface Block RAM(SIRAM)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  store the routing entries of SI
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,ls1043-qe-siram
+          - const: fsl,t1040-qe-siram
+      - const: fsl,t1040-qe-siram
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    siram@1000 {
+        compatible = "fsl,t1040-qe-siram";
+        reg = <0x1000 0x800>;
+    };
+
diff --git a/Bindings/soc/fsl/cpm_qe/fsl,qe.yaml b/Bindings/soc/fsl/cpm_qe/fsl,qe.yaml
new file mode 100644
index 0000000..89cdf5e
--- /dev/null
+++ b/Bindings/soc/fsl/cpm_qe/fsl,qe.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module (QE)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  This represents qe module that is installed on PowerQUICC II Pro.
+
+  NOTE:  This is an interim binding; it should be updated to fit
+  in with the CPM binding later in this document.
+
+  Basically, it is a bus of devices, that could act more or less
+  as a complete entity (UCC, USB etc ). All of them should be siblings on
+  the "root" qe node, using the common properties from there.
+  The description below applies to the qe of MPC8360 and
+  more nodes and properties would be extended in the future.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,qe
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [QE, CPM, CPM2]
+
+  bus-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the clock frequency for QUICC Engine.
+
+  fsl,qe-num-riscs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: define how many RISC engines the QE has.
+
+  fsl,qe-snums:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 28
+    description:
+      defining the array of serial number (SNUM) values for the virtual
+      threads.
+
+  fsl,firmware-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      required only if there is no fsl,qe-firmware child node
+
+      Points to a firmware node (see "QE Firmware Node" below)
+      that contains the firmware that should be uploaded for this QE.
+      The compatible property for the firmware node should say,
+      "fsl,qe-firmware".
+
+  brg-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      the internal clock source frequency for baud-rate
+      generators in Hz.
+
+  fsl,qe-num-snums:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description: |
+      define how many serial number(SNUM) the QE can use
+      for the threads. Use fsl,qe-snums instead to not only specify the
+      number of snums, but also their values.
+
+patternProperties:
+  '^muram@[a-f0-9]+$':
+    $ref: fsl,qe-muram.yaml
+
+  '^interrupt-controller@[a-f0-9]+$':
+    $ref: fsl,qe-ic.yaml
+
+  '^si@[a-f0-9]+$':
+    $ref: fsl,qe-si.yaml
+
+  '^siram@[a-f0-9]+$':
+    $ref: fsl,qe-siram.yaml
+
+required:
+  - compatible
+  - reg
+  - bus-frequency
+
+allOf:
+  - $ref: /schemas/simple-bus.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    qe-bus@e0100000 {
+        compatible = "fsl,qe", "simple-bus";
+        reg = <0xe0100000 0x480>;
+        ranges = <0 0xe0100000 0x00100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        brg-frequency = <0>;
+        bus-frequency = <0x179a7b00>;
+        fsl,qe-snums = /bits/ 8 <
+            0x04 0x05 0x0c 0x0d 0x14 0x15 0x1c 0x1d
+            0x24 0x25 0x2c 0x2d 0x34 0x35 0x88 0x89
+            0x98 0x99 0xa8 0xa9 0xb8 0xb9 0xc8 0xc9
+            0xd8 0xd9 0xe8 0xe9>;
+
+        interrupt-controller@80 {
+            compatible = "fsl,qe-ic";
+            reg = <0x80 0x80>;
+            #interrupt-cells = <1>;
+            interrupt-controller;
+            interrupts = <95 2 0 0  94 2 0 0>;
+        };
+
+        si@700 {
+            compatible = "fsl,t1040-qe-si";
+            reg = <0x700 0x80>;
+        };
+
+        siram@1000 {
+          compatible = "fsl,t1040-qe-siram";
+          reg = <0x1000 0x800>;
+        };
+
+        muram@10000 {
+            compatible = "fsl,qe-muram", "fsl,cpm-muram";
+            ranges = <0 0x00010000 0x0000c000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+              data-only@0{
+                  compatible = "fsl,qe-muram-data",
+                              "fsl,cpm-muram-data";
+                  reg = <0 0xc000>;
+              };
+        };
+    };
diff --git a/Bindings/soc/fsl/cpm_qe/qe.txt b/Bindings/soc/fsl/cpm_qe/qe.txt
deleted file mode 100644
index 05ec2a8..0000000
--- a/Bindings/soc/fsl/cpm_qe/qe.txt
+++ /dev/null
@@ -1,178 +0,0 @@
-* Freescale QUICC Engine module (QE)
-This represents qe module that is installed on PowerQUICC II Pro.
-
-NOTE:  This is an interim binding; it should be updated to fit
-in with the CPM binding later in this document.
-
-Basically, it is a bus of devices, that could act more or less
-as a complete entity (UCC, USB etc ). All of them should be siblings on
-the "root" qe node, using the common properties from there.
-The description below applies to the qe of MPC8360 and
-more nodes and properties would be extended in the future.
-
-i) Root QE device
-
-Required properties:
-- compatible : should be "fsl,qe";
-- model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
-- reg : offset and length of the device registers.
-- bus-frequency : the clock frequency for QUICC Engine.
-- fsl,qe-num-riscs: define how many RISC engines the QE has.
-- fsl,qe-snums: This property has to be specified as '/bits/ 8' value,
-  defining the array of serial number (SNUM) values for the virtual
-  threads.
-
-Optional properties:
-- fsl,firmware-phandle:
-    Usage: required only if there is no fsl,qe-firmware child node
-    Value type: <phandle>
-    Definition: Points to a firmware node (see "QE Firmware Node" below)
-        that contains the firmware that should be uploaded for this QE.
-        The compatible property for the firmware node should say,
-        "fsl,qe-firmware".
-
-Recommended properties
-- brg-frequency : the internal clock source frequency for baud-rate
-  generators in Hz.
-
-Deprecated properties
-- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use
-  for the threads. Use fsl,qe-snums instead to not only specify the
-  number of snums, but also their values.
-
-Example:
-     qe@e0100000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	#interrupt-cells = <2>;
-	compatible = "fsl,qe";
-	ranges = <0 e0100000 00100000>;
-	reg = <e0100000 480>;
-	brg-frequency = <0>;
-	bus-frequency = <179A7B00>;
-	fsl,qe-snums = /bits/ 8 <
-		0x04 0x05 0x0C 0x0D 0x14 0x15 0x1C 0x1D
-		0x24 0x25 0x2C 0x2D 0x34 0x35 0x88 0x89
-		0x98 0x99 0xA8 0xA9 0xB8 0xB9 0xC8 0xC9
-		0xD8 0xD9 0xE8 0xE9>;
-     }
-
-* Multi-User RAM (MURAM)
-
-Required properties:
-- compatible : should be "fsl,qe-muram", "fsl,cpm-muram".
-- mode : the could be "host" or "slave".
-- ranges : Should be defined as specified in 1) to describe the
-   translation of MURAM addresses.
-- data-only : sub-node which defines the address area under MURAM
-   bus that can be allocated as data/parameter
-
-Example:
-
-     muram@10000 {
-	compatible = "fsl,qe-muram", "fsl,cpm-muram";
-	ranges = <0 00010000 0000c000>;
-
-	data-only@0{
-		compatible = "fsl,qe-muram-data",
-			     "fsl,cpm-muram-data";
-		reg = <0 c000>;
-	};
-     };
-
-* Interrupt Controller (IC)
-
-Required properties:
-- compatible : should be "fsl,qe-ic".
-- reg : Address range of IC register set.
-- interrupts : interrupts generated by the device.
-- interrupt-controller : this device is a interrupt controller.
-
-Example:
-
-	qeic: interrupt-controller@80 {
-		interrupt-controller;
-		compatible = "fsl,qe-ic";
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x80 0x80>;
-		interrupts = <95 2 0 0  94 2 0 0>;
-	};
-
-* Serial Interface Block (SI)
-
-The SI manages the routing of eight TDM lines to the QE block serial drivers
-, the MCC and the UCCs, for receive and transmit.
-
-Required properties:
-- compatible : must be "fsl,<chip>-qe-si". For t1040, must contain
-  "fsl,t1040-qe-si".
-- reg : Address range of SI register set.
-
-Example:
-
-	si1: si@700 {
-		compatible = "fsl,t1040-qe-si";
-		reg = <0x700 0x80>;
-	};
-
-* Serial Interface Block RAM(SIRAM)
-
-store the routing entries of SI
-
-Required properties:
-- compatible : should be "fsl,<chip>-qe-siram". For t1040, must contain
-  "fsl,t1040-qe-siram".
-- reg : Address range of SI RAM.
-
-Example:
-
-	siram1: siram@1000 {
-		compatible = "fsl,t1040-qe-siram";
-		reg = <0x1000 0x800>;
-	};
-
-* QE Firmware Node
-
-This node defines a firmware binary that is embedded in the device tree, for
-the purpose of passing the firmware from bootloader to the kernel, or from
-the hypervisor to the guest.
-
-The firmware node itself contains the firmware binary contents, a compatible
-property, and any firmware-specific properties.  The node should be placed
-inside a QE node that needs it.  Doing so eliminates the need for a
-fsl,firmware-phandle property.  Other QE nodes that need the same firmware
-should define an fsl,firmware-phandle property that points to the firmware node
-in the first QE node.
-
-The fsl,firmware property can be specified in the DTS (possibly using incbin)
-or can be inserted by the boot loader at boot time.
-
-Required properties:
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: A standard property.  Specify a string that indicates what
-          kind of firmware it is.  For QE, this should be "fsl,qe-firmware".
-
-   - fsl,firmware
-      Usage: required
-      Value type: <prop-encoded-array>, encoded as an array of bytes
-      Definition: A standard property.  This property contains the firmware
-          binary "blob".
-
-Example:
-	qe1@e0080000 {
-		compatible = "fsl,qe";
-		qe_firmware:qe-firmware {
-			compatible = "fsl,qe-firmware";
-			fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
-		};
-		...
-	};
-
-	qe2@e0090000 {
-		compatible = "fsl,qe";
-		fsl,firmware-phandle = <&qe_firmware>;
-		...
-	};
diff --git a/Bindings/soc/fsl/fsl,bman-portal.yaml b/Bindings/soc/fsl/fsl,bman-portal.yaml
new file mode 100644
index 0000000..8dce75b
--- /dev/null
+++ b/Bindings/soc/fsl/fsl,bman-portal.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,bman-portal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Queue Manager Portals
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  QorIQ DPAA Buffer Manager Portal
+
+  Portals are memory mapped interfaces to BMan that allow low-latency, lock-less
+  interaction by software running on processor cores, accelerators and network
+  interfaces with the BMan
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,bman-portal
+      - items:
+          - enum:
+              - fsl,bman-portal-1.0.0
+              - fsl,ls1043a-bmap-portal
+              - fsl,ls1046a-bmap-portal
+          - const: fsl,bman-portal
+  reg:
+    items:
+      - description: the cache-enabled region of the portal
+      - description: the cache-inhibited region of the portal
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bman-portal@0 {
+        compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
+        reg = <0x0 0x4000>, <0x100000 0x1000>;
+        interrupts = <105 IRQ_TYPE_EDGE_FALLING 0 0>;
+    };
diff --git a/Bindings/soc/fsl/fsl,bman.yaml b/Bindings/soc/fsl/fsl,bman.yaml
new file mode 100644
index 0000000..e6f4682
--- /dev/null
+++ b/Bindings/soc/fsl/fsl,bman.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,bman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Buffer Manager
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA).
+  BMan supports hardware allocation and deallocation of buffers belonging to
+  pools originally created by software with configurable depletion thresholds.
+  This binding covers the CCSR space programming model
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,bman
+      - items:
+          - enum:
+              - fsl,ls1043a-bman
+              - fsl,ls1046a-bman
+          - const: fsl,bman
+
+  reg:
+    items:
+      - description: |
+          Registers region within the CCSR address space
+
+          The BMan revision information is located in the BMAN_IP_REV_1/2
+          registers which are located at offsets 0xbf8 and 0xbfc
+
+  interrupts:
+    items:
+      - description: The error interrupt
+
+  memory-region:
+    minItems: 1
+    maxItems: 2
+    description:
+      List of phandles referencing the BMan private memory
+      nodes (described below). The bman-fqd node must be
+      first followed by bman-pfdr node. Only used on ARM
+
+      Devices connected to a BMan instance via Direct Connect Portals (DCP) must link
+      to the respective BMan instance
+
+  fsl,bman-portals:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: ref fsl,bman-port.yaml
+
+  fsl,liodn:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      See pamu.txt, PAMU property used for static LIODN assignment
+
+  fsl,iommu-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      See pamu.txt, PAMU property used for dynamic LIODN assignment
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bman@31a000 {
+        compatible = "fsl,bman";
+        reg = <0x31a000 0x1000>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING 1 2>;
+        fsl,liodn = <0x17>;
+        fsl,bman-portals = <&bportals>;
+        memory-region = <&bman_fbpr>;
+    };
diff --git a/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml
index ce1a650..3fb0534 100644
--- a/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml
+++ b/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml
@@ -8,7 +8,6 @@
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
-  - Li Yang <leoyang.li@nxp.com>
 
 description: |
   DCFG is the device configuration unit, that provides general purpose
diff --git a/Bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Bindings/soc/fsl/fsl,layerscape-scfg.yaml
index a6a511b..2a456c8 100644
--- a/Bindings/soc/fsl/fsl,layerscape-scfg.yaml
+++ b/Bindings/soc/fsl/fsl,layerscape-scfg.yaml
@@ -8,7 +8,6 @@
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
-  - Li Yang <leoyang.li@nxp.com>
 
 description: |
   SCFG is the supplemental configuration unit, that provides SoC specific
diff --git a/Bindings/soc/fsl/fsl,ls1028a-reset.yaml b/Bindings/soc/fsl/fsl,ls1028a-reset.yaml
new file mode 100644
index 0000000..31295be
--- /dev/null
+++ b/Bindings/soc/fsl/fsl,ls1028a-reset.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas//soc/fsl/fsl,ls1028a-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Reset Registers Module
+
+maintainers:
+  - Frank Li
+
+description:
+  Reset Module includes chip reset, service processor control and Reset Control
+  Word (RCW) status.
+
+properties:
+  $nodename:
+    pattern: "^syscon@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - fsl,ls1028a-reset
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+
+  reboot:
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reboot
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1e60000 {
+        compatible = "fsl,ls1028a-reset", "syscon", "simple-mfd";
+        reg = <0x1e60000 0x10000>;
+        little-endian;
+
+        reboot {
+            compatible = "syscon-reboot";
+            offset = <0>;
+            mask = <0x02>;
+        };
+    };
+
diff --git a/Bindings/soc/fsl/fsl,qman-fqd.yaml b/Bindings/soc/fsl/fsl,qman-fqd.yaml
new file mode 100644
index 0000000..de0b4ae
--- /dev/null
+++ b/Bindings/soc/fsl/fsl,qman-fqd.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,qman-fqd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QMan Private Memory Nodes
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  QMan requires two contiguous range of physical memory used for the backing store
+  for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
+  This memory is reserved/allocated as a node under the /reserved-memory node.
+
+  BMan requires a contiguous range of physical memory used for the backing store
+  for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as
+  a node under the /reserved-memory node.
+
+  The QMan FQD memory node must be named "qman-fqd"
+  The QMan PFDR memory node must be named "qman-pfdr"
+  The BMan FBPR memory node must be named "bman-fbpr"
+
+  The following constraints are relevant to the FQD and PFDR private memory:
+    - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
+      1 GiB
+    - The alignment must be a muliptle of the memory size
+
+  The size of the FQD and PFDP must be chosen by observing the hardware features
+  configured via the Reset Configuration Word (RCW) and that are relevant to a
+  specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
+  FMan ports, etc.). The size configured in the DT must reflect the hardware
+  capabilities and not the specific needs of an application
+
+  For additional details about reserved memory regions see
+  reserved-memory/reserved-memory.yaml in dtschema project.
+
+properties:
+  $nodename:
+    pattern: '^(qman-fqd|qman-pfdr|bman-fbpr)+$'
+
+  compatible:
+    enum:
+      - fsl,qman-fqd
+      - fsl,qman-pfdr
+      - fsl,bman-fbpr
+
+required:
+  - compatible
+
+allOf:
+  - $ref: reserved-memory.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qman-fqd {
+            compatible = "shared-dma-pool";
+            size = <0 0x400000>;
+            alignment = <0 0x400000>;
+            no-map;
+        };
+    };
diff --git a/Bindings/soc/fsl/fsl,qman-portal.yaml b/Bindings/soc/fsl/fsl,qman-portal.yaml
new file mode 100644
index 0000000..1701618
--- /dev/null
+++ b/Bindings/soc/fsl/fsl,qman-portal.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,qman-portal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Queue Manager Portals
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
+  interaction by software running on processor cores, accelerators and network
+  interfaces with the QMan
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,qman-portal
+      - items:
+          - enum:
+              - fsl,ls1043-qman-portal
+              - fsl,ls1046-qman-portal
+              - fsl,qman-portal-1.2.0
+          - const: fsl,qman-portal
+
+  reg:
+    items:
+      - description: the cache-enabled region of the portal
+      - description: the cache-inhibited region of the portal
+
+  interrupts:
+    maxItems: 1
+
+  fsl,liodn:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: See pamu.txt. Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
+      (FLIODN)
+
+  fsl,iommu-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: See pamu.txt.
+
+  fsl,qman-channel-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: qman channel id.
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The hardware index of the channel. This can also be
+      determined by dividing any of the channel's 8 work queue
+      IDs by 8
+
+      In addition to these properties the qman-portals should have sub-nodes to
+      represent the HW devices/portals that are connected to the software portal
+      described here
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+patternProperties:
+  '^(fman0|fman1|pme|crypto)+$':
+    type: object
+    properties:
+      fsl,liodn:
+        description: See pamu.txt, PAMU property used for static LIODN assignment
+
+      fsl,iommu-parent:
+        description: See pamu.txt, PAMU property used for dynamic LIODN assignment
+
+      dev-handle:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description:
+          The phandle to the particular hardware device that this
+          portal is connected to.
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    qman-portal@0 {
+        compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+        reg = <0 0x4000>, <0x100000 0x1000>;
+        interrupts = <104 IRQ_TYPE_EDGE_FALLING 0 0>;
+        fsl,liodn = <1 2>;
+        fsl,qman-channel-id = <0>;
+
+        fman0 {
+            fsl,liodn = <0x21>;
+            dev-handle = <&fman0>;
+        };
+
+        fman1 {
+            fsl,liodn = <0xa1>;
+            dev-handle = <&fman1>;
+        };
+
+        crypto {
+            fsl,liodn = <0x41 0x66>;
+            dev-handle = <&crypto>;
+        };
+    };
diff --git a/Bindings/soc/fsl/fsl,qman.yaml b/Bindings/soc/fsl/fsl,qman.yaml
new file mode 100644
index 0000000..501f06e
--- /dev/null
+++ b/Bindings/soc/fsl/fsl,qman.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,qman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Queue Manager
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
+  supports queuing and QoS scheduling of frames to CPUs, network interfaces and
+  DPAA logic modules, maintains packet ordering within flows. Besides providing
+  flow-level queuing, is also responsible for congestion management functions such
+  as RED/WRED, congestion notifications and tail discards. This binding covers the
+  CCSR space programming model
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,qman
+      - items:
+          - enum:
+              - fsl,ls1043a-qman
+              - fsl,ls1046a-qman
+          - const: fsl,qman
+  reg:
+    items:
+      - description: |
+          Registers region within the CCSR address space
+
+          The QMan revision information is located in the QMAN_IP_REV_1/2
+          registers which are located at offsets 0xbf8 and 0xbfc
+
+  interrupts:
+    items:
+      - description: The error interrupt
+
+  fsl,qman-portals:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: ref fsl,qman-port.yaml
+
+  fsl,liodn:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      See pamu.txt, PAMU property used for static LIODN assignment
+
+  fsl,iommu-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      See pamu.txt, PAMU property used for dynamic LIODN assignment
+
+  clocks:
+    maxItems: 1
+    description:
+      Reference input clock. Its frequency is half of the platform clock
+
+  memory-region:
+    maxItems: 2
+    description:
+      List of phandles referencing the QMan private memory nodes (described
+      below). The qman-fqd node must be first followed by qman-pfdr node.
+      Only used on ARM Devices connected to a QMan instance via Direct Connect
+      Portals (DCP) must link to the respective QMan instance.
+
+  fsl,qman:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      List of phandle and DCP index pairs, to the QMan instance
+      to which this device is connected via the DCP
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    qman: qman@318000 {
+        compatible = "fsl,qman";
+        reg = <0x318000 0x1000>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING 1 3>;
+        fsl,liodn = <0x16>;
+        fsl,qman-portals = <&qportals>;
+        memory-region = <&qman_fqd &qman_pfdr>;
+        clocks = <&platform_pll 1>;
+    };
diff --git a/Bindings/soc/fsl/qman-portals.txt b/Bindings/soc/fsl/qman-portals.txt
deleted file mode 100644
index 5a34f3a..0000000
--- a/Bindings/soc/fsl/qman-portals.txt
+++ /dev/null
@@ -1,134 +0,0 @@
-QorIQ DPAA Queue Manager Portals Device Tree Binding
-
-Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
-
-CONTENTS
-
-	- QMan Portal
-	- Example
-
-QMan Portal Node
-
-Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
-interaction by software running on processor cores, accelerators and network
-interfaces with the QMan
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,qman-portal-<hardware revision>"
-			May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal"
-
-- reg
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Two regions. The first is the cache-enabled region of
-			the portal. The second is the cache-inhibited region of
-			the portal
-
-- interrupts
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Standard property
-
-- fsl,liodn
-	Usage:		See pamu.txt
-	Value type:	<prop-encoded-array>
-	Definition:	Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
-			(FLIODN)
-
-- fsl,iommu-parent
-	Usage:		See pamu.txt
-	Value type:	<phandle>
-	Definition:	PAMU property used for dynamic LIODN assignment
-
-	For additional details about the PAMU/LIODN binding(s) see pamu.txt
-
-- cell-index
-	Usage:		Required
-	Value type:	<u32>
-	Definition:	The hardware index of the channel. This can also be
-			determined by dividing any of the channel's 8 work queue
-			IDs by 8
-
-In addition to these properties the qman-portals should have sub-nodes to
-represent the HW devices/portals that are connected to the software portal
-described here
-
-The currently supported sub-nodes are:
-	* fman0
-	* fman1
-	* pme
-	* crypto
-
-These subnodes should have the following properties:
-
-- fsl,liodn
-	Usage:		See pamu.txt
-	Value type:	<prop-encoded-array>
-	Definition:	PAMU property used for static LIODN assignment
-
-- fsl,iommu-parent
-	Usage:		See pamu.txt
-	Value type:	<phandle>
-	Definition:	PAMU property used for dynamic LIODN assignment
-
-- dev-handle
-	Usage:		Required
-	Value type:	<phandle>
-	Definition:	The phandle to the particular hardware device that this
-			portal is connected to.
-
-EXAMPLE
-
-The example below shows a (P4080) QMan portals container/bus node with two portals
-
-	qman-portals@ff4200000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0 0xf 0xf4200000 0x200000>;
-
-		qman-portal@0 {
-			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
-			reg = <0 0x4000>, <0x100000 0x1000>;
-			interrupts = <104 2 0 0>;
-			fsl,liodn = <1 2>;
-			fsl,qman-channel-id = <0>;
-
-			fman0 {
-				fsl,liodn = <0x21>;
-				dev-handle = <&fman0>;
-			};
-			fman1 {
-				fsl,liodn = <0xa1>;
-				dev-handle = <&fman1>;
-			};
-			crypto {
-				fsl,liodn = <0x41 0x66>;
-				dev-handle = <&crypto>;
-			};
-		};
-		qman-portal@4000 {
-			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
-			reg = <0x4000 0x4000>, <0x101000 0x1000>;
-			interrupts = <106 2 0 0>;
-			fsl,liodn = <3 4>;
-			cell-index = <1>;
-
-			fman0 {
-				fsl,liodn = <0x22>;
-				dev-handle = <&fman0>;
-			};
-			fman1 {
-				fsl,liodn = <0xa2>;
-				dev-handle = <&fman1>;
-			};
-			crypto {
-				fsl,liodn = <0x42 0x67>;
-				dev-handle = <&crypto>;
-			};
-		};
-	};
diff --git a/Bindings/soc/fsl/qman.txt b/Bindings/soc/fsl/qman.txt
deleted file mode 100644
index ee96afd..0000000
--- a/Bindings/soc/fsl/qman.txt
+++ /dev/null
@@ -1,187 +0,0 @@
-QorIQ DPAA Queue Manager Device Tree Binding
-
-Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
-
-CONTENTS
-
-	- QMan Node
-	- QMan Private Memory Nodes
-	- Example
-
-QMan Node
-
-The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
-supports queuing and QoS scheduling of frames to CPUs, network interfaces and
-DPAA logic modules, maintains packet ordering within flows. Besides providing
-flow-level queuing, is also responsible for congestion management functions such
-as RED/WRED, congestion notifications and tail discards. This binding covers the
-CCSR space programming model
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,qman"
-			May include "fsl,<SoC>-qman"
-
-- reg
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Registers region within the CCSR address space
-
-The QMan revision information is located in the QMAN_IP_REV_1/2 registers which
-are located at offsets 0xbf8 and 0xbfc
-
-- interrupts
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Standard property. The error interrupt
-
-- fsl,qman-portals
-	Usage:		Required
-	Value type:	<phandle>
-	Definition:	Phandle to this QMan instance's portals
-
-- fsl,liodn
-	Usage:		See pamu.txt
-	Value type:	<prop-encoded-array>
-	Definition:	PAMU property used for static LIODN assignment
-
-- fsl,iommu-parent
-	Usage:		See pamu.txt
-	Value type:	<phandle>
-	Definition:	PAMU property used for dynamic LIODN assignment
-
-	For additional details about the PAMU/LIODN binding(s) see pamu.txt
-
-- clocks
-	Usage:		See clock-bindings.txt and qoriq-clock.txt
-	Value type:	<prop-encoded-array>
-	Definition:	Reference input clock. Its frequency is half of the
-			platform clock
-- memory-regions
-	Usage:		Required for ARM
-	Value type:	<phandle array>
-	Definition:	List of phandles referencing the QMan private memory
-			nodes (described below). The qman-fqd node must be
-			first followed by qman-pfdr node. Only used on ARM
-
-Devices connected to a QMan instance via Direct Connect Portals (DCP) must link
-to the respective QMan instance
-
-- fsl,qman
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Description:	List of phandle and DCP index pairs, to the QMan instance
-			to which this device is connected via the DCP
-
-QMan Private Memory Nodes
-
-QMan requires two contiguous range of physical memory used for the backing store
-for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
-This memory is reserved/allocated as a node under the /reserved-memory node.
-
-For additional details about reserved memory regions see reserved-memory.txt
-
-The QMan FQD memory node must be named "qman-fqd"
-
-PROPERTIES
-
-- compatible
-	Usage:		required
-	Value type:	<stringlist>
-	Definition:	PPC platforms: Must include "fsl,qman-fqd"
-			ARM platforms: Must include "shared-dma-pool"
-				       as well as the "no-map" property
-
-The QMan PFDR memory node must be named "qman-pfdr"
-
-PROPERTIES
-
-- compatible
-	Usage:		required
-	Value type:	<stringlist>
-	Definition:	PPC platforms: Must include "fsl,qman-pfdr"
-			ARM platforms: Must include "shared-dma-pool"
-				       as well as the "no-map" property
-
-The following constraints are relevant to the FQD and PFDR private memory:
-	- The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
-	  1 GiB
-	- The alignment must be a muliptle of the memory size
-
-The size of the FQD and PFDP must be chosen by observing the hardware features
-configured via the Reset Configuration Word (RCW) and that are relevant to a
-specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
-FMan ports, etc.). The size configured in the DT must reflect the hardware
-capabilities and not the specific needs of an application
-
-For additional details about reserved memory regions see reserved-memory.txt
-
-EXAMPLE
-
-The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		qman_fqd: qman-fqd {
-			compatible = "shared-dma-pool";
-			size = <0 0x400000>;
-			alignment = <0 0x400000>;
-			no-map;
-		};
-		qman_pfdr: qman-pfdr {
-			compatible = "shared-dma-pool";
-			size = <0 0x2000000>;
-			alignment = <0 0x2000000>;
-			no-map;
-		};
-	};
-
-The example below shows a (P4080) QMan CCSR-space node
-
-	qportals: qman-portals@ff4200000 {
-		...
-	};
-
-	clockgen: global-utilities@e1000 {
-		...
-		sysclk: sysclk {
-			...
-		};
-		...
-		platform_pll: platform-pll@c00 {
-			#clock-cells = <1>;
-			reg = <0xc00 0x4>;
-			compatible = "fsl,qoriq-platform-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "platform-pll", "platform-pll-div2";
-		};
-		...
-	};
-
-	crypto@300000 {
-		...
-		fsl,qman = <&qman, 2>;
-		...
-	};
-
-	qman: qman@318000 {
-		compatible = "fsl,qman";
-		reg = <0x318000 0x1000>;
-		interrupts = <16 2 1 3>
-		fsl,liodn = <0x16>;
-		fsl,qman-portals = <&qportals>;
-		memory-region = <&qman_fqd &qman_pfdr>;
-		clocks = <&platform_pll 1>;
-	};
-
-	fman@400000 {
-		...
-		fsl,qman = <&qman, 0>;
-		...
-	};
diff --git a/Bindings/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml b/Bindings/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml
new file mode 100644
index 0000000..5c77c49
--- /dev/null
+++ b/Bindings/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Kirin 960 USB OTG Battery Charging Syscon
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,hi3660-usb3-otg-bc
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  usb-phy:
+    $ref: /schemas/phy/hisilicon,hi3660-usb3.yaml
+    description: USB Phy node
+
+required:
+  - compatible
+  - reg
+  - usb-phy
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@ff200000 {
+        compatible = "hisilicon,hi3660-usb3-otg-bc", "syscon", "simple-mfd";
+        reg = <0xff200000 0x1000>;
+
+        usb-phy {
+            compatible = "hisilicon,hi3660-usb-phy";
+            #phy-cells = <0>;
+            hisilicon,pericrg-syscon = <&crg_ctrl>;
+            hisilicon,pctrl-syscon = <&pctrl>;
+            hisilicon,eye-diagram-param = <0x22466e4>;
+        };
+    };
diff --git a/Bindings/soc/intel/intel,lgm-syscon.yaml b/Bindings/soc/intel/intel,lgm-syscon.yaml
new file mode 100644
index 0000000..6951d55
--- /dev/null
+++ b/Bindings/soc/intel/intel,lgm-syscon.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/intel/intel,lgm-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain(LGM) Syscon
+
+maintainers:
+  - Chuanhua Lei <lchuanhua@maxlinear.com>
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+properties:
+  compatible:
+    items:
+      - const: intel,lgm-syscon
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "^emmc-phy@[0-9a-f]+$":
+    $ref: /schemas/phy/intel,lgm-emmc-phy.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    chiptop@e0200000 {
+        compatible = "intel,lgm-syscon", "syscon";
+        reg = <0xe0200000 0x100>;
+        ranges = <0x0 0xe0200000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        emmc-phy@a8 {
+            compatible = "intel,lgm-emmc-phy";
+            reg = <0x00a8 0x10>;
+            clocks = <&emmc>;
+            #phy-cells = <0>;
+        };
+    };
diff --git a/Bindings/soc/mediatek/mediatek,mutex.yaml b/Bindings/soc/mediatek/mediatek,mutex.yaml
index ba2014a..a10326a 100644
--- a/Bindings/soc/mediatek/mediatek,mutex.yaml
+++ b/Bindings/soc/mediatek/mediatek,mutex.yaml
@@ -33,6 +33,7 @@
       - mediatek,mt8186-disp-mutex
       - mediatek,mt8186-mdp3-mutex
       - mediatek,mt8188-disp-mutex
+      - mediatek,mt8188-vpp-mutex
       - mediatek,mt8192-disp-mutex
       - mediatek,mt8195-disp-mutex
       - mediatek,mt8195-vpp-mutex
diff --git a/Bindings/soc/microchip/microchip,sparx5-cpu-syscon.yaml b/Bindings/soc/microchip/microchip,sparx5-cpu-syscon.yaml
new file mode 100644
index 0000000..1f0b542
--- /dev/null
+++ b/Bindings/soc/microchip/microchip,sparx5-cpu-syscon.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/microchip/microchip,sparx5-cpu-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 CPU Syscon
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+properties:
+  compatible:
+    items:
+      - const: microchip,sparx5-cpu-syscon
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  mux-controller:
+    $ref: /schemas/mux/reg-mux.yaml#
+
+required:
+  - compatible
+  - reg
+  - mux-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        syscon@600000000 {
+            compatible = "microchip,sparx5-cpu-syscon", "syscon",
+                         "simple-mfd";
+            reg = <0x6 0x00000000 0xd0>;
+
+            mux: mux-controller {
+                compatible = "mmio-mux";
+                #mux-control-cells = <1>;
+                mux-reg-masks = <0x88 0xf0>;
+            };
+        };
+    };
diff --git a/Bindings/soc/mobileye/mobileye,eyeq5-olb.yaml b/Bindings/soc/mobileye/mobileye,eyeq5-olb.yaml
new file mode 100644
index 0000000..f7e606d
--- /dev/null
+++ b/Bindings/soc/mobileye/mobileye,eyeq5-olb.yaml
@@ -0,0 +1,374 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mobileye/mobileye,eyeq5-olb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ SoC system controller
+
+maintainers:
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+description:
+  OLB ("Other Logic Block") is a hardware block grouping smaller blocks. Clocks,
+  resets, pinctrl are being handled from here. EyeQ5 and EyeQ6L host a single
+  instance. EyeQ6H hosts seven instances.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mobileye,eyeq5-olb
+          - mobileye,eyeq6l-olb
+          - mobileye,eyeq6h-acc-olb
+          - mobileye,eyeq6h-central-olb
+          - mobileye,eyeq6h-east-olb
+          - mobileye,eyeq6h-west-olb
+          - mobileye,eyeq6h-south-olb
+          - mobileye,eyeq6h-ddr0-olb
+          - mobileye,eyeq6h-ddr1-olb
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    description:
+      First cell is domain and optional if compatible has a single reset domain.
+      Second cell is reset index inside that domain.
+    enum: [ 1, 2 ]
+
+  '#clock-cells':
+    description:
+      Cell is clock index. Optional if compatible has a single clock.
+    enum: [ 0, 1 ]
+
+  clocks:
+    maxItems: 1
+    description:
+      Input parent clock to all PLLs. Expected to be the main crystal.
+
+  clock-names:
+    const: ref
+
+patternProperties:
+  '-pins?$':
+    type: object
+    description: Pin muxing configuration.
+    $ref: /schemas/pinctrl/pinmux-node.yaml#
+    additionalProperties: false
+    properties:
+      pins: true
+      function:
+        enum: [gpio,
+               # Bank A
+               timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0,
+               spi1, refclk0,
+               # Bank B
+               timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0]
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+    required:
+      - pins
+      - function
+    allOf:
+      - if:
+          properties:
+            function:
+              const: gpio
+        then:
+          properties:
+            pins:
+              items: # PA0 - PA28, PB0 - PB22
+                pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$'
+      - if:
+          properties:
+            function:
+              const: timer0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA0, PA1]
+      - if:
+          properties:
+            function:
+              const: timer1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA2, PA3]
+      - if:
+          properties:
+            function:
+              const: timer2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA4, PA5]
+      - if:
+          properties:
+            function:
+              const: timer5
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA6, PA7, PA8, PA9]
+      - if:
+          properties:
+            function:
+              const: uart0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA10, PA11]
+      - if:
+          properties:
+            function:
+              const: uart1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA12, PA13]
+      - if:
+          properties:
+            function:
+              const: can0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA14, PA15]
+      - if:
+          properties:
+            function:
+              const: can1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA16, PA17]
+      - if:
+          properties:
+            function:
+              const: spi0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA18, PA19, PA20, PA21, PA22]
+      - if:
+          properties:
+            function:
+              const: spi1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA23, PA24, PA25, PA26, PA27]
+      - if:
+          properties:
+            function:
+              const: refclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA28]
+      - if:
+          properties:
+            function:
+              const: timer3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB0, PB1]
+      - if:
+          properties:
+            function:
+              const: timer4
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB2, PB3]
+      - if:
+          properties:
+            function:
+              const: timer6
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB4, PB5, PB6, PB7]
+      - if:
+          properties:
+            function:
+              const: uart2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB8, PB9]
+      - if:
+          properties:
+            function:
+              const: can2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB10, PB11]
+      - if:
+          properties:
+            function:
+              const: spi2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB12, PB13, PB14, PB15, PB16]
+      - if:
+          properties:
+            function:
+              const: spi3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB17, PB18, PB19, PB20, PB21]
+      - if:
+          properties:
+            function:
+              const: mclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB22]
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+allOf:
+    # Compatibles exposing a single reset domain.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mobileye,eyeq6h-acc-olb
+              - mobileye,eyeq6h-east-olb
+              - mobileye,eyeq6h-west-olb
+    then:
+      properties:
+        '#reset-cells':
+          const: 1
+      required:
+        - '#reset-cells'
+
+    # Compatibles exposing two reset domains.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mobileye,eyeq5-olb
+              - mobileye,eyeq6l-olb
+    then:
+      properties:
+        '#reset-cells':
+          const: 2
+      required:
+        - '#reset-cells'
+
+    # Compatibles not exposing resets.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mobileye,eyeq6h-central-olb
+              - mobileye,eyeq6h-south-olb
+              - mobileye,eyeq6h-ddr0-olb
+              - mobileye,eyeq6h-ddr1-olb
+    then:
+      properties:
+        '#reset-cells': false
+
+    # Compatibles exposing a single clock.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mobileye,eyeq6h-central-olb
+              - mobileye,eyeq6h-east-olb
+              - mobileye,eyeq6h-west-olb
+              - mobileye,eyeq6h-ddr0-olb
+              - mobileye,eyeq6h-ddr1-olb
+    then:
+      properties:
+        '#clock-cells':
+          const: 0
+    else:
+      properties:
+        '#clock-cells':
+          const: 1
+
+    # Only EyeQ5 has pinctrl in OLB.
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: mobileye,eyeq5-olb
+    then:
+      patternProperties:
+        '-pins?$': false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      system-controller@e00000 {
+        compatible = "mobileye,eyeq5-olb", "syscon";
+        reg = <0 0xe00000 0x0 0x400>;
+        #reset-cells = <2>;
+        #clock-cells = <1>;
+        clocks = <&xtal>;
+        clock-names = "ref";
+      };
+    };
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      system-controller@d2003000 {
+        compatible = "mobileye,eyeq6h-acc-olb", "syscon";
+        reg = <0x0 0xd2003000 0x0 0x1000>;
+        #reset-cells = <1>;
+        #clock-cells = <1>;
+        clocks = <&xtal>;
+        clock-names = "ref";
+      };
+    };
diff --git a/Bindings/soc/qcom/qcom,aoss-qmp.yaml b/Bindings/soc/qcom/qcom,aoss-qmp.yaml
index b4478f4..7afdb60 100644
--- a/Bindings/soc/qcom/qcom,aoss-qmp.yaml
+++ b/Bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -31,6 +31,7 @@
           - qcom,sc7280-aoss-qmp
           - qcom,sc8180x-aoss-qmp
           - qcom,sc8280xp-aoss-qmp
+          - qcom,sdx75-aoss-qmp
           - qcom,sdm845-aoss-qmp
           - qcom,sm6350-aoss-qmp
           - qcom,sm8150-aoss-qmp
diff --git a/Bindings/soc/qcom/qcom,rpm-master-stats.yaml b/Bindings/soc/qcom/qcom,rpm-master-stats.yaml
index 9410404..ad2dcc3 100644
--- a/Bindings/soc/qcom/qcom,rpm-master-stats.yaml
+++ b/Bindings/soc/qcom/qcom,rpm-master-stats.yaml
@@ -7,7 +7,7 @@
 title: Qualcomm Technologies, Inc. (QTI) RPM Master Stats
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   The Qualcomm RPM (Resource Power Manager) architecture includes a concept
diff --git a/Bindings/soc/qcom/qcom,smp2p.yaml b/Bindings/soc/qcom/qcom,smp2p.yaml
index 5850052..141d666 100644
--- a/Bindings/soc/qcom/qcom,smp2p.yaml
+++ b/Bindings/soc/qcom/qcom,smp2p.yaml
@@ -41,6 +41,7 @@
     description:
       Three entries specifying the outgoing ipc bit used for signaling the
       remote end of the smp2p edge.
+    deprecated: true
 
   qcom,local-pid:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -128,7 +129,7 @@
         compatible = "qcom,smp2p";
         qcom,smem = <431>, <451>;
         interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
-        qcom,ipc = <&apcs 8 18>;
+        mboxes = <&apcs 18>;
         qcom,local-pid = <0>;
         qcom,remote-pid = <4>;
 
diff --git a/Bindings/soc/qcom/qcom,smsm.yaml b/Bindings/soc/qcom/qcom,smsm.yaml
index db67cf0..4900215 100644
--- a/Bindings/soc/qcom/qcom,smsm.yaml
+++ b/Bindings/soc/qcom/qcom,smsm.yaml
@@ -33,6 +33,14 @@
       specifier of the column in the subscription matrix representing the local
       processor.
 
+  mboxes:
+    minItems: 1
+    maxItems: 5
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client. Each entry represents the N:th remote processor by index
+      (0-indexed).
+
   '#size-cells':
     const: 0
 
@@ -47,6 +55,7 @@
     description:
       Three entries specifying the outgoing ipc bit used for signaling the N:th
       remote processor.
+    deprecated: true
 
   "@[0-9a-f]$":
     type: object
@@ -98,15 +107,18 @@
   - '#address-cells'
   - '#size-cells'
 
-anyOf:
-  - required:
-      - qcom,ipc-1
+oneOf:
   - required:
-      - qcom,ipc-2
-  - required:
-      - qcom,ipc-3
-  - required:
-      - qcom,ipc-4
+      - mboxes
+  - anyOf:
+      - required:
+          - qcom,ipc-1
+      - required:
+          - qcom,ipc-2
+      - required:
+          - qcom,ipc-3
+      - required:
+          - qcom,ipc-4
 
 additionalProperties: false
 
@@ -122,7 +134,7 @@
         compatible = "qcom,smsm";
         #address-cells = <1>;
         #size-cells = <0>;
-        qcom,ipc-3 = <&apcs 8 19>;
+        mboxes = <0>, <0>, <0>, <&apcs 19>;
 
         apps_smsm: apps@0 {
             reg = <0>;
diff --git a/Bindings/soc/rockchip/grf.yaml b/Bindings/soc/rockchip/grf.yaml
index 79798c7..35b20e5 100644
--- a/Bindings/soc/rockchip/grf.yaml
+++ b/Bindings/soc/rockchip/grf.yaml
@@ -31,10 +31,16 @@
               - rockchip,rk3588-pcie3-pipe-grf
               - rockchip,rk3588-usb-grf
               - rockchip,rk3588-usbdpphy-grf
-              - rockchip,rk3588-vo-grf
+              - rockchip,rk3588-vo0-grf
+              - rockchip,rk3588-vo1-grf
               - rockchip,rk3588-vop-grf
               - rockchip,rv1108-usbgrf
           - const: syscon
+      - items:
+          - const: rockchip,rk3588-vo-grf
+          - const: syscon
+        deprecated: true
+        description: Use rockchip,rk3588-vo{0,1}-grf instead.
       - items:
           - enum:
               - rockchip,px30-grf
@@ -176,9 +182,10 @@
             Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
 
       patternProperties:
-        "phy@[0-9a-f]+$":
-          description:
-            Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+        "^phy@[0-9a-f]+$":
+          type: object
+          $ref: /schemas/phy/rockchip,rk3399-emmc-phy.yaml#
+          unevaluatedProperties: false
 
   - if:
       properties:
@@ -261,6 +268,8 @@
           contains:
             enum:
               - rockchip,rk3588-vo-grf
+              - rockchip,rk3588-vo0-grf
+              - rockchip,rk3588-vo1-grf
 
     then:
       required:
@@ -292,6 +301,15 @@
         #phy-cells = <0>;
       };
 
+      phy@f780 {
+        compatible = "rockchip,rk3399-emmc-phy";
+        reg = <0xf780 0x20>;
+        clocks = <&sdhci>;
+        clock-names = "emmcclk";
+        drive-impedance-ohm = <50>;
+        #phy-cells = <0>;
+      };
+
       u2phy0: usb2phy@e450 {
         compatible = "rockchip,rk3399-usb2phy";
         reg = <0xe450 0x10>;
diff --git a/Bindings/soc/sprd/sprd,sc9863a-glbregs.yaml b/Bindings/soc/sprd/sprd,sc9863a-glbregs.yaml
new file mode 100644
index 0000000..49add56
--- /dev/null
+++ b/Bindings/soc/sprd/sprd,sc9863a-glbregs.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/sprd/sprd,sc9863a-glbregs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SC9863A Syscon
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - const: sprd,sc9863a-glbregs
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "@[0-9a-f]+$":
+    $ref: /schemas/clock/sprd,sc9863a-clk.yaml
+    description: Clock controllers
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@20e00000 {
+      compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd";
+      reg = <0x20e00000 0x4000>;
+      ranges = <0 0x20e00000 0x4000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      apahb_gate: apahb-gate@0 {
+        compatible = "sprd,sc9863a-apahb-gate";
+        reg = <0x0 0x1020>;
+        #clock-cells = <1>;
+      };
+    };
+
+...
diff --git a/Bindings/soc/sti/st,sti-syscon.yaml b/Bindings/soc/sti/st,sti-syscon.yaml
index 5f97d9f..fc933d7 100644
--- a/Bindings/soc/sti/st,sti-syscon.yaml
+++ b/Bindings/soc/sti/st,sti-syscon.yaml
@@ -30,6 +30,15 @@
   reg:
     maxItems: 1
 
+  sti-sasg-codec:
+    description: STi internal audio codec
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: st,stih407-sas-codec
+
 required:
   - compatible
   - reg
diff --git a/Bindings/soc/ti/sci-pm-domain.yaml b/Bindings/soc/ti/sci-pm-domain.yaml
index a750035..b6da720 100644
--- a/Bindings/soc/ti/sci-pm-domain.yaml
+++ b/Bindings/soc/ti/sci-pm-domain.yaml
@@ -40,7 +40,7 @@
       TI_SCI_PD_SHARED - Allows the device to be shared by multiple hosts.
       Please refer to dt-bindings/soc/ti,sci_pm_domain.h for the definitions.
 
-      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      Please see https://software-dl.ti.com/tisci/esd/latest/index.html for
       protocol documentation for the values to be used for different devices.
 
 additionalProperties: false
diff --git a/Bindings/soc/ti/ti,am654-serdes-ctrl.yaml b/Bindings/soc/ti/ti,am654-serdes-ctrl.yaml
new file mode 100644
index 0000000..a10a3b8
--- /dev/null
+++ b/Bindings/soc/ti/ti,am654-serdes-ctrl.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/ti,am654-serdes-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AM654 Serdes Control Syscon
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+properties:
+  compatible:
+    items:
+      - const: ti,am654-serdes-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  mux-controller:
+    $ref: /schemas/mux/reg-mux.yaml#
+
+required:
+  - compatible
+  - reg
+  - mux-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    clock@4080 {
+        compatible = "ti,am654-serdes-ctrl", "syscon";
+        reg = <0x4080 0x4>;
+
+        mux-controller {
+            compatible = "mmio-mux";
+            #mux-control-cells = <1>;
+            mux-reg-masks = <0x0 0x3>; /* lane select */
+        };
+    };
diff --git a/Bindings/soc/ti/ti,j721e-system-controller.yaml b/Bindings/soc/ti/ti,j721e-system-controller.yaml
new file mode 100644
index 0000000..378e9cc
--- /dev/null
+++ b/Bindings/soc/ti/ti,j721e-system-controller.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/ti,j721e-system-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721e System Controller Registers R/W
+
+description: |
+  This represents the Control Module registers (CTRL_MMR0) on the SoC.
+  System controller node represents a register region containing a set
+  of miscellaneous registers. The registers are not cohesive enough to
+  represent as any specific type of device. The typical use-case is
+  for some other node's driver, or platform-specific code, to acquire
+  a reference to the syscon node (e.g. by phandle, node path, or
+  search using a specific compatible value), interrogate the node (or
+  associated OS driver) to determine the location of the registers,
+  and access the registers directly.
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@kernel.org>
+  - Roger Quadros <rogerq@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,j7200-system-controller
+          - ti,j721e-system-controller
+          - ti,j721s2-system-controller
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  # Optional children
+  "^mux-controller@[0-9a-f]+$":
+    type: object
+    description:
+      This is the SERDES lane control mux.
+
+  "^clock-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
+    description:
+      Clock provider for TI EHRPWM nodes.
+
+  "phy@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/phy/ti,phy-gmii-sel.yaml#
+    description:
+      The phy node corresponding to the ethernet MAC.
+
+  "^chipid@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/hwinfo/ti,k3-socinfo.yaml#
+    description:
+      The node corresponding to SoC chip identification.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    scm_conf: scm-conf@100000 {
+        compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+        reg = <0x00100000 0x1c000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        serdes_ln_ctrl: mux-controller@4080 {
+            compatible = "mmio-mux";
+            reg = <0x00004080 0x50>;
+
+            #mux-control-cells = <1>;
+            mux-reg-masks =
+                <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+                <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
+                <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
+                <0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
+                <0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
+                /* SERDES4 lane0/1/2/3 select */
+        };
+
+        clock-controller@4140 {
+            compatible = "ti,am654-ehrpwm-tbclk";
+            reg = <0x4140 0x18>;
+            #clock-cells = <1>;
+        };
+
+        chipid@14 {
+            compatible = "ti,am654-chipid";
+            reg = <0x14 0x4>;
+        };
+    };
+...