diff --git a/Bindings/phy/airoha,en7581-pcie-phy.yaml b/Bindings/phy/airoha,en7581-pcie-phy.yaml
new file mode 100644
index 0000000..98fcb1b
--- /dev/null
+++ b/Bindings/phy/airoha,en7581-pcie-phy.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/airoha,en7581-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 PCI-Express PHY
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description:
+  The PCIe PHY supports physical layer functionality for PCIe Gen2/Gen3 port.
+
+properties:
+  compatible:
+    const: airoha,en7581-pcie-phy
+
+  reg:
+    items:
+      - description: PCIE analog base address
+      - description: PCIE lane0 base address
+      - description: PCIE lane1 base address
+      - description: PCIE lane0 detection time base address
+      - description: PCIE lane1 detection time base address
+      - description: PCIE Rx AEQ base address
+
+  reg-names:
+    items:
+      - const: csr-2l
+      - const: pma0
+      - const: pma1
+      - const: p0-xr-dtime
+      - const: p1-xr-dtime
+      - const: rx-aeq
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        phy@11e80000 {
+            compatible = "airoha,en7581-pcie-phy";
+            #phy-cells = <0>;
+            reg = <0x0 0x1fa5a000 0x0 0xfff>,
+                  <0x0 0x1fa5b000 0x0 0xfff>,
+                  <0x0 0x1fa5c000 0x0 0xfff>,
+                  <0x0 0x1fc10044 0x0 0x4>,
+                  <0x0 0x1fc30044 0x0 0x4>,
+                  <0x0 0x1fc15030 0x0 0x104>;
+            reg-names = "csr-2l", "pma0", "pma1",
+                        "p0-xr-dtime", "p1-xr-dtime",
+                        "rx-aeq";
+        };
+    };
diff --git a/Bindings/phy/amlogic,g12a-usb2-phy.yaml b/Bindings/phy/amlogic,g12a-usb2-phy.yaml
index 0031fb6..1a0c436 100644
--- a/Bindings/phy/amlogic,g12a-usb2-phy.yaml
+++ b/Bindings/phy/amlogic,g12a-usb2-phy.yaml
@@ -41,6 +41,9 @@
       Phandle to a regulator that provides power to the PHY. This
       regulator will be managed during the PHY power on/off sequence.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Bindings/phy/fsl,imx8qm-hsio.yaml b/Bindings/phy/fsl,imx8qm-hsio.yaml
new file mode 100644
index 0000000..147bbfd
--- /dev/null
+++ b/Bindings/phy/fsl,imx8qm-hsio.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8qm-hsio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8QM SoC series High Speed IO(HSIO) SERDES PHY
+
+maintainers:
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-hsio
+      - fsl,imx8qxp-hsio
+  reg:
+    items:
+      - description: Base address and length of the PHY block
+      - description: HSIO control and status registers(CSR) of the PHY
+      - description: HSIO CSR of the controller bound to the PHY
+      - description: HSIO CSR for MISC
+
+  reg-names:
+    items:
+      - const: reg
+      - const: phy
+      - const: ctrl
+      - const: misc
+
+  "#phy-cells":
+    const: 3
+    description:
+      The first defines lane index.
+      The second defines the type of the PHY refer to the include phy.h.
+      The third defines the controller index, indicated which controller
+      is bound to the lane.
+
+  clocks:
+    minItems: 5
+    maxItems: 14
+
+  clock-names:
+    minItems: 5
+    maxItems: 14
+
+  fsl,hsio-cfg:
+    description: |
+      Specifies the use case of the HSIO module in the hardware design.
+      Regarding the design of i.MX8QM HSIO subsystem, HSIO module can be
+      confiured as following three use cases.
+      +---------------------------------------+
+      |                  | i.MX8QM            |
+      |------------------|--------------------|
+      |                  | Lane0| Lane1| Lane2|
+      |------------------|------|------|------|
+      | pciea-x2-sata    | PCIEA| PCIEA| SATA |
+      |------------------|------|------|------|
+      | pciea-x2-pcieb   | PCIEA| PCIEA| PCIEB|
+      |------------------|------|------|------|
+      | pciea-pcieb-sata | PCIEA| PCIEB| SATA |
+      +---------------------------------------+
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ pciea-x2-sata, pciea-x2-pcieb, pciea-pcieb-sata]
+    default: pciea-pcieb-sata
+
+  fsl,refclk-pad-mode:
+    description:
+      Specifies the mode of the refclk pad used. INPUT(PHY refclock is
+      provided externally via the refclk pad) or OUTPUT(PHY refclock is
+      derived from SoC internal source and provided on the refclk pad).
+      This property not exists means unused(PHY refclock is derived from
+      SoC internal source).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ input, output, unused ]
+    default: unused
+
+  power-domains:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - fsl,hsio-cfg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-hsio
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pclk0
+            - const: apb_pclk0
+            - const: phy0_crr
+            - const: ctl0_crr
+            - const: misc_crr
+        power-domains:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-hsio
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pclk0
+            - const: pclk1
+            - const: apb_pclk0
+            - const: apb_pclk1
+            - const: pclk2
+            - const: epcs_tx
+            - const: epcs_rx
+            - const: apb_pclk2
+            - const: phy0_crr
+            - const: phy1_crr
+            - const: ctl0_crr
+            - const: ctl1_crr
+            - const: ctl2_crr
+            - const: misc_crr
+        power-domains:
+          minItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-clock.h>
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/phy/phy-imx8-pcie.h>
+
+    phy@5f1a0000 {
+        compatible = "fsl,imx8qxp-hsio";
+        reg = <0x5f1a0000 0x10000>,
+              <0x5f120000 0x10000>,
+              <0x5f140000 0x10000>,
+              <0x5f160000 0x10000>;
+        reg-names = "reg", "phy", "ctrl", "misc";
+        clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>,
+                 <&phyx1_lpcg IMX_LPCG_CLK_4>,
+                 <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
+                 <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
+                 <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr", "misc_crr";
+        power-domains = <&pd IMX_SC_R_SERDES_1>;
+        #phy-cells = <3>;
+        fsl,hsio-cfg = "pciea-pcieb-sata";
+        fsl,refclk-pad-mode = "input";
+    };
+...
diff --git a/Bindings/phy/marvell,armada-cp110-utmi-phy.yaml b/Bindings/phy/marvell,armada-cp110-utmi-phy.yaml
index 9ce7b4c..2ef02aa 100644
--- a/Bindings/phy/marvell,armada-cp110-utmi-phy.yaml
+++ b/Bindings/phy/marvell,armada-cp110-utmi-phy.yaml
@@ -41,6 +41,12 @@
       Phandle to the system controller node
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  swap-dx-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Specifies the ports which will swap the differential-pair (D+/D-),
+      default is not-swapped.
+
 # Required child nodes:
 
 patternProperties:
diff --git a/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
index 634cec5..58ce2d9 100644
--- a/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
+++ b/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
@@ -19,6 +19,8 @@
       - qcom,ipq6018-qmp-pcie-phy
       - qcom,ipq8074-qmp-gen3-pcie-phy
       - qcom,ipq8074-qmp-pcie-phy
+      - qcom,ipq9574-qmp-gen3x1-pcie-phy
+      - qcom,ipq9574-qmp-gen3x2-pcie-phy
 
   reg:
     items:
diff --git a/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 16634f7..03dbd02 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -91,8 +91,7 @@
   "#clock-cells": true
 
   clock-output-names:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   "#phy-cells":
     const: 0
@@ -222,14 +221,10 @@
               - qcom,sm8650-qmp-gen4x2-pcie-phy
     then:
       properties:
-        clock-output-names:
-          minItems: 2
         "#clock-cells":
           const: 1
     else:
       properties:
-        clock-output-names:
-          maxItems: 1
         "#clock-cells":
           const: 0
 
diff --git a/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index 325585b..0e0b6ca 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -20,8 +20,9 @@
       - qcom,ipq8074-qmp-usb3-phy
       - qcom,ipq9574-qmp-usb3-phy
       - qcom,msm8996-qmp-usb3-phy
-      - com,qdu1000-qmp-usb3-uni-phy
+      - qcom,qdu1000-qmp-usb3-uni-phy
       - qcom,sa8775p-qmp-usb3-uni-phy
+      - qcom,sc8180x-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sdx55-qmp-usb3-uni-phy
@@ -112,6 +113,7 @@
             enum:
               - qcom,qdu1000-qmp-usb3-uni-phy
               - qcom,sa8775p-qmp-usb3-uni-phy
+              - qcom,sc8180x-qmp-usb3-uni-phy
               - qcom,sc8280xp-qmp-usb3-uni-phy
               - qcom,sm8150-qmp-usb3-uni-phy
               - qcom,sm8250-qmp-usb3-uni-phy
@@ -152,6 +154,7 @@
           contains:
             enum:
               - qcom,sa8775p-qmp-usb3-uni-phy
+              - qcom,sc8180x-qmp-usb3-uni-phy
               - qcom,sc8280xp-qmp-usb3-uni-phy
               - qcom,x1e80100-qmp-usb3-uni-phy
     then:
diff --git a/Bindings/phy/qcom,usb-hs-phy.yaml b/Bindings/phy/qcom,usb-hs-phy.yaml
index f042d6a..e03b516 100644
--- a/Bindings/phy/qcom,usb-hs-phy.yaml
+++ b/Bindings/phy/qcom,usb-hs-phy.yaml
@@ -15,6 +15,7 @@
       contains:
         enum:
           - qcom,usb-hs-phy-apq8064
+          - qcom,usb-hs-phy-msm8660
           - qcom,usb-hs-phy-msm8960
 then:
   properties:
@@ -41,6 +42,7 @@
       - enum:
           - qcom,usb-hs-phy-apq8064
           - qcom,usb-hs-phy-msm8226
+          - qcom,usb-hs-phy-msm8660
           - qcom,usb-hs-phy-msm8916
           - qcom,usb-hs-phy-msm8960
           - qcom,usb-hs-phy-msm8974
diff --git a/Bindings/phy/rockchip,rk3399-emmc-phy.yaml b/Bindings/phy/rockchip,rk3399-emmc-phy.yaml
new file mode 100644
index 0000000..3e3729b
--- /dev/null
+++ b/Bindings/phy/rockchip,rk3399-emmc-phy.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,rk3399-emmc-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip EMMC PHY
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3399-emmc-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: emmcclk
+
+  drive-impedance-ohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Specifies the drive impedance in Ohm.
+    enum: [33, 40, 50, 66, 100]
+    default: 50
+
+  rockchip,enable-strobe-pulldown:
+    type: boolean
+    description: |
+      Enable internal pull-down for the strobe
+      line.  If not set, pull-down is not used.
+
+  rockchip,output-tapdelay-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Specifies the phyctrl_otapdlysec register.
+    default: 0x4
+    maximum: 0xf
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@f780 {
+      compatible = "rockchip,rk3399-emmc-phy";
+      reg = <0xf780 0x20>;
+      clocks = <&sdhci>;
+      clock-names = "emmcclk";
+      drive-impedance-ohm = <50>;
+      #phy-cells = <0>;
+    };
diff --git a/Bindings/phy/rockchip-emmc-phy.txt b/Bindings/phy/rockchip-emmc-phy.txt
deleted file mode 100644
index 57d28c0..0000000
--- a/Bindings/phy/rockchip-emmc-phy.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Rockchip EMMC PHY
------------------------
-
-Required properties:
- - compatible: rockchip,rk3399-emmc-phy
- - #phy-cells: must be 0
- - reg: PHY register address offset and length in "general
-   register files"
-
-Optional properties:
- - clock-names: Should contain "emmcclk".  Although this is listed as optional
-		(because most boards can get basic functionality without having
-		access to it), it is strongly suggested.
-		See ../clock/clock-bindings.txt for details.
- - clocks: Should have a phandle to the card clock exported by the SDHCI driver.
- - drive-impedance-ohm: Specifies the drive impedance in Ohm.
-                        Possible values are 33, 40, 50, 66 and 100.
-                        If not set, the default value of 50 will be applied.
- - rockchip,enable-strobe-pulldown: Enable internal pull-down for the strobe
-                                    line.  If not set, pull-down is not used.
- - rockchip,output-tapdelay-select: Specifies the phyctrl_otapdlysec register.
-                                    If not set, the register defaults to 0x4.
-                                    Maximum value 0xf.
-
-Example:
-
-
-grf: syscon@ff770000 {
-	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-...
-
-	emmcphy: phy@f780 {
-		compatible = "rockchip,rk3399-emmc-phy";
-		reg = <0xf780 0x20>;
-		clocks = <&sdhci>;
-		clock-names = "emmcclk";
-		drive-impedance-ohm = <50>;
-		#phy-cells = <0>;
-	};
-};
diff --git a/Bindings/phy/samsung,usb3-drd-phy.yaml b/Bindings/phy/samsung,usb3-drd-phy.yaml
index 452e584..16321cd 100644
--- a/Bindings/phy/samsung,usb3-drd-phy.yaml
+++ b/Bindings/phy/samsung,usb3-drd-phy.yaml
@@ -25,6 +25,7 @@
 properties:
   compatible:
     enum:
+      - google,gs101-usb31drd-phy
       - samsung,exynos5250-usbdrd-phy
       - samsung,exynos5420-usbdrd-phy
       - samsung,exynos5433-usbdrd-phy
@@ -57,7 +58,15 @@
       the OF graph bindings specified.
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: phy
+      - const: pcs
+      - const: pma
 
   samsung,pmu-syscon:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -72,6 +81,19 @@
     description:
       VBUS Boost 5V power source.
 
+  pll-supply:
+    description: Power supply for the USB PLL.
+  dvdd-usb20-supply:
+    description: DVDD power supply for the USB 2.0 phy.
+  vddh-usb20-supply:
+    description: VDDh power supply for the USB 2.0 phy.
+  vdd33-usb20-supply:
+    description: 3.3V power supply for the USB 2.0 phy.
+  vdda-usbdp-supply:
+    description: VDDa power supply for the USB DP phy.
+  vddh-usbdp-supply:
+    description: VDDh power supply for the USB DP phy.
+
 required:
   - compatible
   - clocks
@@ -85,6 +107,40 @@
       properties:
         compatible:
           contains:
+            const: google,gs101-usb31drd-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Gate of main PHY clock
+            - description: Gate of PHY reference clock
+            - description: Gate of control interface AXI clock
+            - description: Gate of control interface APB clock
+            - description: Gate of SCL APB clock
+        clock-names:
+          items:
+            - const: phy
+            - const: ref
+            - const: ctrl_aclk
+            - const: ctrl_pclk
+            - const: scl_pclk
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+      required:
+        - reg-names
+        - pll-supply
+        - dvdd-usb20-supply
+        - vddh-usb20-supply
+        - vdd33-usb20-supply
+        - vdda-usbdp-supply
+        - vddh-usbdp-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
             enum:
               - samsung,exynos5433-usbdrd-phy
               - samsung,exynos7-usbdrd-phy
@@ -100,7 +156,20 @@
             - const: phy_utmi
             - const: phy_pipe
             - const: itp
-    else:
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5250-usbdrd-phy
+              - samsung,exynos5420-usbdrd-phy
+              - samsung,exynos850-usbdrd-phy
+    then:
       properties:
         clocks:
           minItems: 2
@@ -109,6 +178,10 @@
           items:
             - const: phy
             - const: ref
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
 
 additionalProperties: false
 
diff --git a/Bindings/phy/starfive,jh7110-dphy-tx.yaml b/Bindings/phy/starfive,jh7110-dphy-tx.yaml
new file mode 100644
index 0000000..4a06a26
--- /dev/null
+++ b/Bindings/phy/starfive,jh7110-dphy-tx.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive SoC MIPI D-PHY Tx Controller
+
+maintainers:
+  - Keith Zhao <keith.zhao@starfivetech.com>
+  - Shengyang Chen <shengyang.chen@starfivetech.com>
+
+description:
+  The Starfive SoC uses the MIPI DSI D-PHY based on M31 IP to transfer
+  DSI data.
+
+properties:
+  compatible:
+    const: starfive,jh7110-dphy-tx
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: txesc
+
+  resets:
+    items:
+      - description: MIPITX_DPHY_SYS reset
+
+  reset-names:
+    items:
+      - const: sys
+
+  power-domains:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@295e0000 {
+      compatible = "starfive,jh7110-dphy-tx";
+      reg = <0x295e0000 0x10000>;
+      clocks = <&voutcrg 14>;
+      clock-names = "txesc";
+      resets = <&syscrg 10>;
+      reset-names = "sys";
+      power-domains = <&aon_syscon 0>;
+      #phy-cells = <0>;
+    };