FEC: Add support for iMX28 quirks
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 0c0c7cd..b05a4c0 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -42,6 +42,14 @@
#define CONFIG_FEC_XCV_TYPE MII100
#endif
+/*
+ * The i.MX28 operates with packets in big endian. We need to swap them before
+ * sending and after receiving.
+ */
+#ifdef CONFIG_MX28
+#define CONFIG_FEC_MXC_SWAP_PACKET
+#endif
+
#undef DEBUG
struct nbuf {
@@ -51,7 +59,33 @@
uint8_t head[16]; /**< MAC header(6 + 6 + 2) + 2(aligned) */
};
+#ifdef CONFIG_FEC_MXC_SWAP_PACKET
+static void swap_packet(uint32_t *packet, int length)
+{
+ int i;
+
+ for (i = 0; i < DIV_ROUND_UP(length, 4); i++)
+ packet[i] = __swab32(packet[i]);
+}
+#endif
+
/*
+ * The i.MX28 has two ethernet interfaces, but they are not equal.
+ * Only the first one can access the MDIO bus.
+ */
+#ifdef CONFIG_MX28
+static inline struct ethernet_regs *fec_miiphy_fec_to_eth(struct fec_priv *fec)
+{
+ return (struct ethernet_regs *)MXS_ENET0_BASE;
+}
+#else
+static inline struct ethernet_regs *fec_miiphy_fec_to_eth(struct fec_priv *fec)
+{
+ return fec->eth;
+}
+#endif
+
+/*
* MII-interface related functions
*/
static int fec_miiphy_read(const char *dev, uint8_t phyAddr, uint8_t regAddr,
@@ -59,7 +93,7 @@
{
struct eth_device *edev = eth_get_dev_by_name(dev);
struct fec_priv *fec = (struct fec_priv *)edev->priv;
- struct ethernet_regs *eth = fec->eth;
+ struct ethernet_regs *eth = fec_miiphy_fec_to_eth(fec);
uint32_t reg; /* convenient holder for the PHY register */
uint32_t phy; /* convenient holder for the PHY */
@@ -117,7 +151,7 @@
{
struct eth_device *edev = eth_get_dev_by_name(dev);
struct fec_priv *fec = (struct fec_priv *)edev->priv;
- struct ethernet_regs *eth = fec->eth;
+ struct ethernet_regs *eth = fec_miiphy_fec_to_eth(fec);
uint32_t reg; /* convenient holder for the PHY register */
uint32_t phy; /* convenient holder for the PHY */
@@ -572,6 +606,9 @@
* Note: We are always using the first buffer for transmission,
* the second will be empty and only used to stop the DMA engine
*/
+#ifdef CONFIG_FEC_MXC_SWAP_PACKET
+ swap_packet((uint32_t *)packet, length);
+#endif
writew(length, &fec->tbd_base[fec->tbd_index].data_length);
writel((uint32_t)packet, &fec->tbd_base[fec->tbd_index].data_pointer);
/*
@@ -668,6 +705,9 @@
/*
* Fill the buffer and pass it to upper layers
*/
+#ifdef CONFIG_FEC_MXC_SWAP_PACKET
+ swap_packet((uint32_t *)frame->data, frame_length);
+#endif
memcpy(buff, frame->data, frame_length);
NetReceive(buff, frame_length);
len = frame_length;