| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <common.h> |
| #include <asm-offsets.h> |
| #include <clock_legacy.h> |
| #include <mpc83xx.h> |
| #include <system-constants.h> |
| #include <time.h> |
| #include <asm/global_data.h> |
| |
| #include "lblaw/lblaw.h" |
| #include "elbc/elbc.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* |
| * Breathe some life into the CPU... |
| * |
| * Set up the memory map, |
| * initialize a bunch of registers, |
| * initialize the UPM's |
| */ |
| void cpu_init_f (volatile immap_t * im) |
| { |
| /* Pointer is writable since we allocated a register for it */ |
| gd = (gd_t *)SYS_INIT_SP_ADDR; |
| |
| /* global data region was cleared in start.S */ |
| |
| /* system performance tweaking */ |
| |
| #ifndef CONFIG_ACR_PIPE_DEP_UNSET |
| /* Arbiter pipeline depth */ |
| im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | |
| CONFIG_ACR_PIPE_DEP; |
| #endif |
| |
| #ifndef CONFIG_ACR_RPTCNT_UNSET |
| /* Arbiter repeat count */ |
| im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) | |
| CONFIG_ACR_RPTCNT; |
| #endif |
| |
| #ifdef CONFIG_SYS_SPCR_OPT |
| /* Optimize transactions between CSB and other devices */ |
| im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) | |
| (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT); |
| #endif |
| |
| /* Enable Time Base & Decrementer (so we will have udelay()) */ |
| im->sysconf.spcr |= SPCR_TBEN; |
| |
| /* DDR control driver register */ |
| #ifdef CFG_SYS_DDRCDR |
| im->sysconf.ddrcdr = CFG_SYS_DDRCDR; |
| #endif |
| /* Output buffer impedance register */ |
| #ifdef CFG_SYS_OBIR |
| im->sysconf.obir = CFG_SYS_OBIR; |
| #endif |
| |
| /* |
| * Memory Controller: |
| */ |
| |
| /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary |
| * addresses - these have to be modified later when FLASH size |
| * has been determined |
| */ |
| |
| #if defined(CFG_SYS_NAND_BR_PRELIM) \ |
| && defined(CFG_SYS_NAND_OR_PRELIM) \ |
| && defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \ |
| && defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM) |
| set_lbc_br(0, CFG_SYS_NAND_BR_PRELIM); |
| set_lbc_or(0, CFG_SYS_NAND_OR_PRELIM); |
| im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM; |
| im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM; |
| #else |
| #error CFG_SYS_NAND_BR_PRELIM, CFG_SYS_NAND_OR_PRELIM, CONFIG_SYS_NAND_LBLAWBAR_PRELIM & CONFIG_SYS_NAND_LBLAWAR_PRELIM must be defined |
| #endif |
| } |
| |
| /* |
| * Get timebase clock frequency (like cpu_clk in Hz) |
| */ |
| unsigned long get_tbclk(void) |
| { |
| return (gd->bus_clk + 3L) / 4L; |
| } |
| |
| void puts(const char *str) |
| { |
| while (*str) |
| putc(*str++); |
| } |
| |
| ulong get_bus_freq(ulong dummy) |
| { |
| volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; |
| u8 spmf = (im->clk.spmr & SPMR_SPMF) >> SPMR_SPMF_SHIFT; |
| |
| return get_board_sys_clk() * spmf; |
| } |