env: Rename setenv() to env_set()
We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.
Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index ac0592b..5751b81 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -731,7 +731,7 @@
* on HS devices.
*/
if (get_device_type() == HS_DEVICE)
- setenv("boot_fit", "1");
+ env_set("boot_fit", "1");
#endif
#if !defined(CONFIG_SPL_BUILD)
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 933596d..55098bf 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -626,7 +626,7 @@
* on HS devices.
*/
if (get_device_type() == HS_DEVICE)
- setenv("boot_fit", "1");
+ env_set("boot_fit", "1");
#endif
return 0;
}
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 126c9ef..bd94a90 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -592,7 +592,7 @@
/* we will let default be "no lcd" */
}
out:
- setenv("idk_lcd", idk_lcd);
+ env_set("idk_lcd", idk_lcd);
return;
}
@@ -612,7 +612,7 @@
* on HS devices.
*/
if (get_device_type() == HS_DEVICE)
- setenv("boot_fit", "1");
+ env_set("boot_fit", "1");
/*
* Set the GPIO7 Pad to POWERHOLD. This has higher priority
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 887b577..2f62fbe 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -341,16 +341,16 @@
switch (get_board_revision()) {
case REVISION_AXBX:
printf("Beagle Rev Ax/Bx\n");
- setenv("beaglerev", "AxBx");
+ env_set("beaglerev", "AxBx");
break;
case REVISION_CX:
printf("Beagle Rev C1/C2/C3\n");
- setenv("beaglerev", "Cx");
+ env_set("beaglerev", "Cx");
MUX_BEAGLE_C();
break;
case REVISION_C4:
printf("Beagle Rev C4\n");
- setenv("beaglerev", "C4");
+ env_set("beaglerev", "C4");
MUX_BEAGLE_C();
/* Set VAUX2 to 1.8V for EHCI PHY */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
@@ -360,7 +360,7 @@
break;
case REVISION_XM_AB:
printf("Beagle xM Rev A/B\n");
- setenv("beaglerev", "xMAB");
+ env_set("beaglerev", "xMAB");
MUX_BEAGLE_XM();
/* Set VAUX2 to 1.8V for EHCI PHY */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
@@ -371,7 +371,7 @@
break;
case REVISION_XM_C:
printf("Beagle xM Rev C\n");
- setenv("beaglerev", "xMC");
+ env_set("beaglerev", "xMC");
MUX_BEAGLE_XM();
/* Set VAUX2 to 1.8V for EHCI PHY */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
@@ -397,14 +397,14 @@
expansion_config.revision,
expansion_config.fab_revision);
MUX_TINCANTOOLS_ZIPPY();
- setenv("buddy", "zippy");
+ env_set("buddy", "zippy");
break;
case TINCANTOOLS_ZIPPY2:
printf("Recognized Tincantools Zippy2 board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
MUX_TINCANTOOLS_ZIPPY();
- setenv("buddy", "zippy2");
+ env_set("buddy", "zippy2");
break;
case TINCANTOOLS_TRAINER:
printf("Recognized Tincantools Trainer board (rev %d %s)\n",
@@ -412,37 +412,37 @@
expansion_config.fab_revision);
MUX_TINCANTOOLS_ZIPPY();
MUX_TINCANTOOLS_TRAINER();
- setenv("buddy", "trainer");
+ env_set("buddy", "trainer");
break;
case TINCANTOOLS_SHOWDOG:
printf("Recognized Tincantools Showdow board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
/* Place holder for DSS2 definition for showdog lcd */
- setenv("defaultdisplay", "showdoglcd");
- setenv("buddy", "showdog");
+ env_set("defaultdisplay", "showdoglcd");
+ env_set("buddy", "showdog");
break;
case KBADC_BEAGLEFPGA:
printf("Recognized KBADC Beagle FPGA board\n");
MUX_KBADC_BEAGLEFPGA();
- setenv("buddy", "beaglefpga");
+ env_set("buddy", "beaglefpga");
break;
case LW_BEAGLETOUCH:
printf("Recognized Liquidware BeagleTouch board\n");
- setenv("buddy", "beagletouch");
+ env_set("buddy", "beagletouch");
break;
case BRAINMUX_LCDOG:
printf("Recognized Brainmux LCDog board\n");
- setenv("buddy", "lcdog");
+ env_set("buddy", "lcdog");
break;
case BRAINMUX_LCDOGTOUCH:
printf("Recognized Brainmux LCDog Touch board\n");
- setenv("buddy", "lcdogtouch");
+ env_set("buddy", "lcdogtouch");
break;
case BBTOYS_WIFI:
printf("Recognized BeagleBoardToys WiFi board\n");
MUX_BBTOYS_WIFI()
- setenv("buddy", "bbtoys-wifi");
+ env_set("buddy", "bbtoys-wifi");
break;
case BBTOYS_VGA:
printf("Recognized BeagleBoardToys VGA board\n");
@@ -459,20 +459,20 @@
case LSR_COM6L_ADPT:
printf("Recognized LSR COM6L Adapter Board\n");
MUX_BBTOYS_WIFI()
- setenv("buddy", "lsr-com6l-adpt");
+ env_set("buddy", "lsr-com6l-adpt");
break;
case BEAGLE_NO_EEPROM:
printf("No EEPROM on expansion board\n");
- setenv("buddy", "none");
+ env_set("buddy", "none");
break;
default:
printf("Unrecognized expansion board: %x\n",
expansion_config.device_vendor);
- setenv("buddy", "unknown");
+ env_set("buddy", "unknown");
}
if (expansion_config.content == 1)
- setenv(expansion_config.env_var, expansion_config.env_setting);
+ env_set(expansion_config.env_var, expansion_config.env_setting);
twl4030_power_init();
switch (get_board_revision()) {
diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c
index 1da5ace..c4ef282 100644
--- a/board/ti/common/board_detect.c
+++ b/board/ti/common/board_detect.c
@@ -379,21 +379,21 @@
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (name)
- setenv("board_name", name);
+ env_set("board_name", name);
else if (ep->name)
- setenv("board_name", ep->name);
+ env_set("board_name", ep->name);
else
- setenv("board_name", unknown);
+ env_set("board_name", unknown);
if (ep->version)
- setenv("board_rev", ep->version);
+ env_set("board_rev", ep->version);
else
- setenv("board_rev", unknown);
+ env_set("board_rev", unknown);
if (ep->serial)
- setenv("board_serial", ep->serial);
+ env_set("board_serial", ep->serial);
else
- setenv("board_serial", unknown);
+ env_set("board_serial", unknown);
}
static u64 mac_to_u64(u8 mac[6])
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 23be2c7..5c43561 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -558,7 +558,7 @@
* on HS devices.
*/
if (get_device_type() == HS_DEVICE)
- setenv("boot_fit", "1");
+ env_set("boot_fit", "1");
omap_die_id_serial();
omap_set_fastboot_vars();
diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index 2160576..15f0f54 100644
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -310,9 +310,9 @@
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if (board_is_k2g_gp())
- setenv("board_name", "66AK2GGP\0");
+ env_set("board_name", "66AK2GGP\0");
else if (board_is_k2g_ice())
- setenv("board_name", "66AK2GIC\0");
+ env_set("board_name", "66AK2GIC\0");
#endif
return 0;
}
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 6ffb53c..c59e58a 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -103,7 +103,7 @@
board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO);
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- setenv("board_name", "panda-es");
+ env_set("board_name", "panda-es");
#endif
board_id = ((board_id4 << 4) | (board_id3 << 3) |
(board_id2 << 2) | (board_id1 << 1) | (board_id0));
@@ -117,7 +117,7 @@
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3))
- setenv("board_name", "panda-a4");
+ env_set("board_name", "panda-a4");
#endif
}