arm: socfpga: mailbox: Update mailbox response codes
Sync latest mailbox response codes from SDM firmware.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
diff --git a/arch/arm/mach-socfpga/include/mach/mailbox_s10.h b/arch/arm/mach-socfpga/include/mach/mailbox_s10.h
index 55707ab..4d78311 100644
--- a/arch/arm/mach-socfpga/include/mach/mailbox_s10.h
+++ b/arch/arm/mach-socfpga/include/mach/mailbox_s10.h
@@ -67,8 +67,42 @@
MBOX_RESP_UNKNOWN_BR = 2,
/* CMD code not recognized by firmware */
MBOX_RESP_UNKNOWN = 3,
- /* Indicates that the device is not configured */
- MBOX_RESP_NOT_CONFIGURED = 256,
+ /* Length setting is not a valid length for this CMD type */
+ MBOX_RESP_INVALID_LEN = 4,
+ /* Indirect setting is not valid for this CMD type */
+ MBOX_RESP_INVALID_INDIRECT_SETTING = 5,
+ /* HW source which is not allowed to send CMD type */
+ MBOX_RESP_CMD_INVALID_ON_SRC = 6,
+ /* Client with ID not associated with any running PR CMD tries to run
+ * RECONFIG_DATA RECONFIG_STATUS and accessing QSPI / SDMMC using ID
+ * without exclusive access
+ */
+ MBOX_RESP_CLIENT_ID_NO_MATCH = 8,
+ /* Address provided to the system is invalid (alignment, range
+ * permission)
+ */
+ MBOX_RESP_INVALID_ADDR = 0x9,
+ /* Signature authentication failed */
+ MBOX_RESP_AUTH_FAIL = 0xA,
+ /* CMD timed out */
+ MBOX_RESP_TIMEOUT = 0xB,
+ /* HW (i.e. QSPI) is not ready (initialized or configured) */
+ MBOX_RESP_HW_NOT_RDY = 0xC,
+ /* Invalid license for IID registration */
+ MBOX_RESP_PUF_ACCCES_FAILED = 0x80,
+ MBOX_PUF_ENROLL_DISABLE = 0x81,
+ MBOX_RESP_PUF_ENROLL_FAIL = 0x82,
+ MBOX_RESP_PUF_RAM_TEST_FAIL = 0x83,
+ MBOX_RESP_ATTEST_CERT_GEN_FAIL = 0x84,
+ /* Operation not allowed under current security settings */
+ MBOX_RESP_NOT_ALLOWED_UNDER_SECURITY_SETTINGS = 0x85,
+ MBOX_RESP_PUF_TRNG_FAIL = 0x86,
+ MBOX_RESP_FUSE_ALREADY_BLOWN = 0x87,
+ MBOX_RESP_INVALID_SIGNATURE = 0x88,
+ MBOX_RESP_INVALID_HASH = 0x8b,
+ MBOX_RESP_INVALID_CERTIFICATE = 0x91,
+ /* Indicates that the device (FPGA or HPS) is not configured */
+ MBOX_RESP_NOT_CONFIGURED = 0x100,
/* Indicates that the device is busy */
MBOX_RESP_DEVICE_BUSY = 0x1FF,
/* Indicates that there is no valid response available */