arm64: zynqmp: Move fixed clock to / for kv260
fixed clock nodes can't be on the bus because they are missing reg
property. That's why move them to root.
And because it is root it is good to have it as the first node in a file.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/9a6c17fa754add356b3b03356e41d15e4a18648b.1703002605.git.michal.simek@amd.com
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
index f43c159..3db420c 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
@@ -27,27 +27,7 @@
"xlnx,zynqmp-sk-kv260-revZ",
"xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
model = "ZynqMP KV260 revA";
-};
-
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c1_default>;
- pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
- u14: ina260@40 { /* u14 */
- compatible = "ti,ina260";
- #io-channel-cells = <1>;
- label = "ina260-u14";
- reg = <0x40>;
- };
- /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-&amba {
ina260-u14 {
compatible = "iio-hwmon";
io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
@@ -90,6 +70,24 @@
};
};
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ u14: ina260@40 { /* u14 */
+ compatible = "ti,ina260";
+ #io-channel-cells = <1>;
+ label = "ina260-u14";
+ reg = <0x40>;
+ };
+ /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
/* DP/USB 3.0 and SATA */
&psgtr {
status = "okay";
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
index 3643569..6756fdb 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
@@ -22,28 +22,7 @@
"xlnx,zynqmp-sk-kv260-revB",
"xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
model = "ZynqMP KV260 revB";
-};
-
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c1_default>;
- pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
- u14: ina260@40 { /* u14 */
- compatible = "ti,ina260";
- #io-channel-cells = <1>;
- label = "ina260-u14";
- reg = <0x40>;
- };
- /* u43 - 0x2d - USB hub */
- /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-&amba {
ina260-u14 {
compatible = "iio-hwmon";
io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
@@ -86,6 +65,25 @@
};
};
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ u14: ina260@40 { /* u14 */
+ compatible = "ti,ina260";
+ #io-channel-cells = <1>;
+ label = "ina260-u14";
+ reg = <0x40>;
+ };
+ /* u43 - 0x2d - USB hub */
+ /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
/* DP/USB 3.0 */
&psgtr {
status = "okay";