drivers: avoid using aliases on drivers when OF_PLATDATA is enabled

After latest improvements on OF_PLATDATA struct names are generated
based on driver name instead of compatible strings. With this in mind,
using aliases in drivers are not longer needed.

This patch removes code that tried to handle these kind of aliases to
improve readability.

Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/gpio/mxs_gpio.c b/drivers/gpio/mxs_gpio.c
index 2c16517..aaabb02 100644
--- a/drivers/gpio/mxs_gpio.c
+++ b/drivers/gpio/mxs_gpio.c
@@ -138,12 +138,6 @@
 #include <asm/arch/gpio.h>
 #define MXS_MAX_GPIO_PER_BANK		32
 
-#ifdef CONFIG_MX28
-#define dtd_fsl_imx_gpio dtd_fsl_imx28_gpio
-#else /* CONFIG_MX23 */
-#define dtd_fsl_imx_gpio dtd_fsl_imx23_gpio
-#endif
-
 DECLARE_GLOBAL_DATA_PTR;
 /*
  * According to i.MX28 Reference Manual:
@@ -158,7 +152,7 @@
 
 struct mxs_gpio_platdata {
 #if CONFIG_IS_ENABLED(OF_PLATDATA)
-	struct dtd_fsl_imx_gpio dtplat;
+	struct dtd_fsl_imx23_gpio dtplat;
 #endif
 	unsigned int bank;
 	int gpio_ranges;
@@ -247,7 +241,7 @@
 	char name[16], *str;
 
 #if CONFIG_IS_ENABLED(OF_PLATDATA)
-	struct dtd_fsl_imx_gpio *dtplat = &plat->dtplat;
+	struct dtd_fsl_imx23_gpio *dtplat = &plat->dtplat;
 	priv->bank = (unsigned int)dtplat->reg[0];
 	uc_priv->gpio_count = dtplat->gpio_ranges[3];
 #else
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
index d48050b..2b3a3a9 100644
--- a/drivers/mmc/mxsmmc.c
+++ b/drivers/mmc/mxsmmc.c
@@ -52,15 +52,9 @@
 #include <dm/read.h>
 #include <dt-structs.h>
 
-#ifdef CONFIG_MX28
-#define dtd_fsl_imx_mmc dtd_fsl_imx28_mmc
-#else /* CONFIG_MX23 */
-#define dtd_fsl_imx_mmc dtd_fsl_imx23_mmc
-#endif
-
 struct mxsmmc_platdata {
 #if CONFIG_IS_ENABLED(OF_PLATDATA)
-	struct dtd_fsl_imx_mmc dtplat;
+	struct dtd_fsl_imx23_mmc dtplat;
 #endif
 	struct mmc_config cfg;
 	struct mmc mmc;
@@ -582,7 +576,7 @@
 	debug("%s: probe\n", __func__);
 
 #if CONFIG_IS_ENABLED(OF_PLATDATA)
-	struct dtd_fsl_imx_mmc *dtplat = &plat->dtplat;
+	struct dtd_fsl_imx23_mmc *dtplat = &plat->dtplat;
 	struct phandle_1_arg *p1a = &dtplat->clocks[0];
 
 	priv->buswidth = dtplat->bus_width;
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
index 3c1af83..fb0af02 100644
--- a/drivers/spi/mxs_spi.c
+++ b/drivers/spi/mxs_spi.c
@@ -41,15 +41,9 @@
 #define MXS_SSP_IMX23_CLKID_SSP0 33
 #define MXS_SSP_IMX28_CLKID_SSP0 46
 
-#ifdef CONFIG_MX28
-#define dtd_fsl_imx_spi dtd_fsl_imx28_spi
-#else /* CONFIG_MX23 */
-#define dtd_fsl_imx_spi dtd_fsl_imx23_spi
-#endif
-
 struct mxs_spi_platdata {
 #if CONFIG_IS_ENABLED(OF_PLATDATA)
-	struct dtd_fsl_imx_spi dtplat;
+	struct dtd_fsl_imx23_spi dtplat;
 #endif
 	s32 frequency;		/* Default clock frequency, -1 for none */
 	fdt_addr_t base;        /* SPI IP block base address */
@@ -324,7 +318,7 @@
 	debug("%s: probe\n", __func__);
 
 #if CONFIG_IS_ENABLED(OF_PLATDATA)
-	struct dtd_fsl_imx_spi *dtplat = &plat->dtplat;
+	struct dtd_fsl_imx23_spi *dtplat = &plat->dtplat;
 	struct phandle_1_arg *p1a = &dtplat->clocks[0];
 
 	priv->regs = (struct mxs_ssp_regs *)dtplat->reg[0];