x86: broadwell: Allow SDRAM init from SPL
At present, for broadwell, SDRAM is always set up in U-Boot proper since
the 64-bit mode (which uses SDRAM init in SPL) is not supported.
Update the code to allow SDRAM init in SPL instead so that U-Boot proper
can be loaded into SDRAM and run from there. This allows U-Boot to be
compressed to reduce space, since it is not necessary to run it directly
from flash. It could later allow us to support 64-bit U-Boot on broadwell.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/x86/cpu/broadwell/Makefile b/arch/x86/cpu/broadwell/Makefile
index d3785aa..d464507 100644
--- a/arch/x86/cpu/broadwell/Makefile
+++ b/arch/x86/cpu/broadwell/Makefile
@@ -13,4 +13,4 @@
obj-y += power_state.o
obj-y += refcode.o
obj-y += sata.o
-obj-y += sdram.o
+obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += sdram.o
diff --git a/arch/x86/cpu/broadwell/northbridge.c b/arch/x86/cpu/broadwell/northbridge.c
index 3055880..4bcab78 100644
--- a/arch/x86/cpu/broadwell/northbridge.c
+++ b/arch/x86/cpu/broadwell/northbridge.c
@@ -6,8 +6,108 @@
#include <common.h>
#include <dm.h>
#include <asm/io.h>
+#include <asm/mrc_common.h>
#include <asm/arch/iomap.h>
#include <asm/arch/pch.h>
+#include <asm/arch/pei_data.h>
+
+__weak asmlinkage void sdram_console_tx_byte(unsigned char byte)
+{
+#ifdef DEBUG
+ putc(byte);
+#endif
+}
+
+void broadwell_fill_pei_data(struct pei_data *pei_data)
+{
+ pei_data->pei_version = PEI_VERSION;
+ pei_data->board_type = BOARD_TYPE_ULT;
+ pei_data->pciexbar = MCFG_BASE_ADDRESS;
+ pei_data->smbusbar = SMBUS_BASE_ADDRESS;
+ pei_data->ehcibar = EARLY_EHCI_BAR;
+ pei_data->xhcibar = EARLY_XHCI_BAR;
+ pei_data->gttbar = EARLY_GTT_BAR;
+ pei_data->pmbase = ACPI_BASE_ADDRESS;
+ pei_data->gpiobase = GPIO_BASE_ADDRESS;
+ pei_data->tseg_size = CONFIG_SMM_TSEG_SIZE;
+ pei_data->temp_mmio_base = EARLY_TEMP_MMIO;
+ pei_data->tx_byte = sdram_console_tx_byte;
+ pei_data->ddr_refresh_2x = 1;
+}
+
+static void pei_data_usb2_port(struct pei_data *pei_data, int port, uint length,
+ uint enable, uint oc_pin, uint location)
+{
+ pei_data->usb2_ports[port].length = length;
+ pei_data->usb2_ports[port].enable = enable;
+ pei_data->usb2_ports[port].oc_pin = oc_pin;
+ pei_data->usb2_ports[port].location = location;
+}
+
+static void pei_data_usb3_port(struct pei_data *pei_data, int port, uint enable,
+ uint oc_pin, uint fixed_eq)
+{
+ pei_data->usb3_ports[port].enable = enable;
+ pei_data->usb3_ports[port].oc_pin = oc_pin;
+ pei_data->usb3_ports[port].fixed_eq = fixed_eq;
+}
+
+void mainboard_fill_pei_data(struct pei_data *pei_data)
+{
+ /* DQ byte map for Samus board */
+ const u8 dq_map[2][6][2] = {
+ { { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
+ { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } },
+ { { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
+ { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } } };
+ /* DQS CPU<>DRAM map for Samus board */
+ const u8 dqs_map[2][8] = {
+ { 2, 0, 1, 3, 6, 4, 7, 5 },
+ { 2, 1, 0, 3, 6, 5, 4, 7 } };
+
+ pei_data->ec_present = 1;
+
+ /* One installed DIMM per channel */
+ pei_data->dimm_channel0_disabled = 2;
+ pei_data->dimm_channel1_disabled = 2;
+
+ memcpy(pei_data->dq_map, dq_map, sizeof(dq_map));
+ memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map));
+
+ /* P0: HOST PORT */
+ pei_data_usb2_port(pei_data, 0, 0x0080, 1, 0,
+ USB_PORT_BACK_PANEL);
+ /* P1: HOST PORT */
+ pei_data_usb2_port(pei_data, 1, 0x0080, 1, 1,
+ USB_PORT_BACK_PANEL);
+ /* P2: RAIDEN */
+ pei_data_usb2_port(pei_data, 2, 0x0080, 1, USB_OC_PIN_SKIP,
+ USB_PORT_BACK_PANEL);
+ /* P3: SD CARD */
+ pei_data_usb2_port(pei_data, 3, 0x0040, 1, USB_OC_PIN_SKIP,
+ USB_PORT_INTERNAL);
+ /* P4: RAIDEN */
+ pei_data_usb2_port(pei_data, 4, 0x0080, 1, USB_OC_PIN_SKIP,
+ USB_PORT_BACK_PANEL);
+ /* P5: WWAN (Disabled) */
+ pei_data_usb2_port(pei_data, 5, 0x0000, 0, USB_OC_PIN_SKIP,
+ USB_PORT_SKIP);
+ /* P6: CAMERA */
+ pei_data_usb2_port(pei_data, 6, 0x0040, 1, USB_OC_PIN_SKIP,
+ USB_PORT_INTERNAL);
+ /* P7: BT */
+ pei_data_usb2_port(pei_data, 7, 0x0040, 1, USB_OC_PIN_SKIP,
+ USB_PORT_INTERNAL);
+
+ /* P1: HOST PORT */
+ pei_data_usb3_port(pei_data, 0, 1, 0, 0);
+ /* P2: HOST PORT */
+ pei_data_usb3_port(pei_data, 1, 1, 1, 0);
+ /* P3: RAIDEN */
+ pei_data_usb3_port(pei_data, 2, 1, USB_OC_PIN_SKIP, 0);
+ /* P4: RAIDEN */
+ pei_data_usb3_port(pei_data, 3, 1, USB_OC_PIN_SKIP, 0);
+}
static int broadwell_northbridge_early_init(struct udevice *dev)
{
diff --git a/arch/x86/cpu/broadwell/sdram.c b/arch/x86/cpu/broadwell/sdram.c
index 1b9f984..b8450cc 100644
--- a/arch/x86/cpu/broadwell/sdram.c
+++ b/arch/x86/cpu/broadwell/sdram.c
@@ -34,99 +34,6 @@
return 0;
}
-void broadwell_fill_pei_data(struct pei_data *pei_data)
-{
- pei_data->pei_version = PEI_VERSION;
- pei_data->board_type = BOARD_TYPE_ULT;
- pei_data->pciexbar = MCFG_BASE_ADDRESS;
- pei_data->smbusbar = SMBUS_BASE_ADDRESS;
- pei_data->ehcibar = EARLY_EHCI_BAR;
- pei_data->xhcibar = EARLY_XHCI_BAR;
- pei_data->gttbar = EARLY_GTT_BAR;
- pei_data->pmbase = ACPI_BASE_ADDRESS;
- pei_data->gpiobase = GPIO_BASE_ADDRESS;
- pei_data->tseg_size = CONFIG_SMM_TSEG_SIZE;
- pei_data->temp_mmio_base = EARLY_TEMP_MMIO;
- pei_data->tx_byte = sdram_console_tx_byte;
- pei_data->ddr_refresh_2x = 1;
-}
-
-static inline void pei_data_usb2_port(struct pei_data *pei_data, int port,
- uint16_t length, uint8_t enable,
- uint8_t oc_pin, uint8_t location)
-{
- pei_data->usb2_ports[port].length = length;
- pei_data->usb2_ports[port].enable = enable;
- pei_data->usb2_ports[port].oc_pin = oc_pin;
- pei_data->usb2_ports[port].location = location;
-}
-
-static inline void pei_data_usb3_port(struct pei_data *pei_data, int port,
- uint8_t enable, uint8_t oc_pin,
- uint8_t fixed_eq)
-{
- pei_data->usb3_ports[port].enable = enable;
- pei_data->usb3_ports[port].oc_pin = oc_pin;
- pei_data->usb3_ports[port].fixed_eq = fixed_eq;
-}
-
-void mainboard_fill_pei_data(struct pei_data *pei_data)
-{
- /* DQ byte map for Samus board */
- const u8 dq_map[2][6][2] = {
- { { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
- { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } },
- { { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
- { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } } };
- /* DQS CPU<>DRAM map for Samus board */
- const u8 dqs_map[2][8] = {
- { 2, 0, 1, 3, 6, 4, 7, 5 },
- { 2, 1, 0, 3, 6, 5, 4, 7 } };
-
- pei_data->ec_present = 1;
-
- /* One installed DIMM per channel */
- pei_data->dimm_channel0_disabled = 2;
- pei_data->dimm_channel1_disabled = 2;
-
- memcpy(pei_data->dq_map, dq_map, sizeof(dq_map));
- memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map));
-
- /* P0: HOST PORT */
- pei_data_usb2_port(pei_data, 0, 0x0080, 1, 0,
- USB_PORT_BACK_PANEL);
- /* P1: HOST PORT */
- pei_data_usb2_port(pei_data, 1, 0x0080, 1, 1,
- USB_PORT_BACK_PANEL);
- /* P2: RAIDEN */
- pei_data_usb2_port(pei_data, 2, 0x0080, 1, USB_OC_PIN_SKIP,
- USB_PORT_BACK_PANEL);
- /* P3: SD CARD */
- pei_data_usb2_port(pei_data, 3, 0x0040, 1, USB_OC_PIN_SKIP,
- USB_PORT_INTERNAL);
- /* P4: RAIDEN */
- pei_data_usb2_port(pei_data, 4, 0x0080, 1, USB_OC_PIN_SKIP,
- USB_PORT_BACK_PANEL);
- /* P5: WWAN (Disabled) */
- pei_data_usb2_port(pei_data, 5, 0x0000, 0, USB_OC_PIN_SKIP,
- USB_PORT_SKIP);
- /* P6: CAMERA */
- pei_data_usb2_port(pei_data, 6, 0x0040, 1, USB_OC_PIN_SKIP,
- USB_PORT_INTERNAL);
- /* P7: BT */
- pei_data_usb2_port(pei_data, 7, 0x0040, 1, USB_OC_PIN_SKIP,
- USB_PORT_INTERNAL);
-
- /* P1: HOST PORT */
- pei_data_usb3_port(pei_data, 0, 1, 0, 0);
- /* P2: HOST PORT */
- pei_data_usb3_port(pei_data, 1, 1, 1, 0);
- /* P3: RAIDEN */
- pei_data_usb3_port(pei_data, 2, 1, USB_OC_PIN_SKIP, 0);
- /* P4: RAIDEN */
- pei_data_usb3_port(pei_data, 3, 1, USB_OC_PIN_SKIP, 0);
-}
-
static unsigned long get_top_of_ram(struct udevice *dev)
{
/*