diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 87ed4a2..7f2f49c 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -26,6 +26,9 @@
 config TPL_NAND_INIT
 	bool
 
+config SPL_NAND_INIT
+	bool
+
 config SYS_MAX_NAND_DEVICE
 	int "Maximum number of NAND devices to support"
 	default 1
@@ -254,6 +257,8 @@
 	bool "Support OMAP GPMC NAND controller"
 	depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
 	select SYS_NAND_SELF_INIT if ARCH_K3
+	select SPL_NAND_INIT if ARCH_K3
+	select SPL_SYS_NAND_SELF_INIT if ARCH_K3
 	help
 	  Enables omap_gpmc.c driver for OMAPx and AMxxxx platforms.
 	  GPMC controller is used for parallel NAND flash devices, and can
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index a398aa9..6fe33d2 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -18,7 +18,7 @@
 				nand_macronix.o nand_micron.o \
 				nand_samsung.o nand_toshiba.o
 obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o
-obj-$(CONFIG_TPL_NAND_INIT) += nand.o
+obj-$(CONFIG_$(SPL_TPL_)NAND_INIT) += nand.o
 ifeq ($(CONFIG_SPL_ENV_SUPPORT),y)
 obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o
 endif
diff --git a/drivers/mtd/nand/raw/omap_gpmc.c b/drivers/mtd/nand/raw/omap_gpmc.c
index fa60c37..4d5f245 100644
--- a/drivers/mtd/nand/raw/omap_gpmc.c
+++ b/drivers/mtd/nand/raw/omap_gpmc.c
@@ -1263,3 +1263,43 @@
 }
 
 #endif /* CONFIG_SYS_NAND_SELF_INIT */
+
+#if defined(CONFIG_SPL_NAND_INIT)
+
+/* nand_init() is provided by nand.c */
+
+/* Unselect after operation */
+void nand_deselect(void)
+{
+	struct mtd_info *mtd = nand_to_mtd(nand_chip);
+
+	if (nand_chip->select_chip)
+		nand_chip->select_chip(mtd, -1);
+}
+
+static int nand_is_bad_block(int block)
+{
+	struct mtd_info *mtd = nand_to_mtd(nand_chip);
+
+	loff_t ofs = block * CONFIG_SYS_NAND_BLOCK_SIZE;
+
+	return nand_chip->block_bad(mtd, ofs);
+}
+
+static int nand_read_page(int block, int page, uchar *dst)
+{
+	int page_addr = block * CONFIG_SYS_NAND_PAGE_COUNT + page;
+	loff_t ofs = page_addr * CONFIG_SYS_NAND_PAGE_SIZE;
+	int ret;
+	size_t len = CONFIG_SYS_NAND_PAGE_SIZE;
+	struct mtd_info *mtd = nand_to_mtd(nand_chip);
+
+	ret = nand_read(mtd, ofs, &len, dst);
+	if (ret)
+		printf("nand_read failed %d\n", ret);
+
+	return ret;
+}
+
+#include "nand_spl_loaders.c"
+#endif /* CONFIG_SPL_NAND_INIT */